radxa/rtl8852bu

Realtek RTL8852BU USB WiFi 6 Module Linux Driver

rtl8852bu's Issues

Just saying hi

Just happened to run across this. I hope this driver is better than v1.15.0.1 for the 8852au.

I run the below site. It includes 5 Realtek drivers. I was hoping to make the 8852au driver available to the public and just could not get it anywhere near close to something that would be reasonable so I just stopped work and posted a review recommending Linux users stay away from adapters based on the 8852au and 8832au.

https://github.com/morrownr/USB-WiFi

If you are thinking about buying 8852xu or 8832xu based adapters, use caution and be aware that Mediatek will be releasing USB WiFi 6 chipsets soon. In fact the driver is already in-kernel as of 5.18.

Regards

Compiling rtl8852bu

Hello, i am having troubles with ma realtek wifi and bluetooth. The Machine is a Thinkpad e15 gen4. i just compiled the kernel 5.18 to see if it works better. And indeed, now i am getting this info:

root@Murija9:/home/afadoc# dmesg |grep firmware
[ 0.061103] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 3.667876] [drm] Loading DMUB firmware via PSP: version=0x01010019
[ 3.668465] [drm] Found VCN firmware Version ENC: 1.14 DEC: 5 VEP: 0 Revision: 20
[ 3.668469] amdgpu 0000:04:00.0: amdgpu: Will use PSP to load VCN firmware
[ 3.853478] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x5f3001)
[ 6.924768] bluetooth hci0: Direct firmware load for rtl_bt/rtl8852bu_fw.bin failed with error -2
[ 6.924771] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8852bu_fw.bin not found

Than searching for the 8852bu i found your repository.

I did:

git clone https://github.com/radxa/rtl8852bu.git

But when running make, i get this error:

afadoc@Murija9:~/Schreibtisch/install/rtl8852bu$ make
#rm -f .symvers.8852bu
make ARCH= CROSS_COMPILE= -C M=/home/afadoc/Schreibtisch/install/rtl8852bu modules
make[1]: *** M=/home/afadoc/Schreibtisch/install/rtl8852bu: Datei oder Verzeichnis nicht gefunden. Schluss.
make: *** [Makefile:633: modules] Fehler 2

I am not sure why this happens, but anyway - if you have any advice what i could do, i would be really thankfull.

Thank you!

Dragan