ragnt / angryoxide Goto Github PK
View Code? Open in Web Editor NEW802.11 Attack Tool
License: GNU General Public License v3.0
802.11 Attack Tool
License: GNU General Public License v3.0
I really like your program, I discovered it by accident when I was researching hcxdumptool.
I am using your program on a Raspberry pi4, with kali linux installed on the SD card.
I have read your instructions and they are more than detailed and clear. However, I don't understand if the whitelist file (scan exclusion list) should contain the MAC addresses of the APs or if it should also contain the MAC addresses of the clients?
Could you be so kind and show me an example of how this file should look like and whether #commentaries are allowed in it (for BSSID designation, so that I could understand in the future which APs are already excluded)?
I also noticed that during the program is constantly creating and deleting the file *.pcapng.kismet-journal, because of this, that the SD card is constantly writing (if you believe HTOP, then at a rate of about 1.43 MiB / s.). I think this is very harmful to the SD card. Is it not possible to keep this temporary file in RAM or create a temporary file at longer intervals, like once a minute or once every five minutes?
Thank you very much for this program!
Describe the bug
Program crashes when using --band 5, probably because the interface does not support all channels used by AngryOxide
.
To Reproduce
sudo angryoxide --interface wlo1 --band 5
Starting AngryOxide... ๐
๐ฒ Interface Summary:
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
โ Interface: wlo1 โ
โ Index: 3 | Driver: iwlwifi โ
โ Mode: IftypeMonitor | Active Monitor: false โ
โ Modes: Adhoc, Station, Ap, ApVlan, Monitor, P2P Client, P2P Go, P2P Device โ
โ State: Unknown โ
โ Current Frequency: 5320 (5GHz 64) โ
โ Band2GHz: โ
โ [2412 (1)] [2417 (2)] [2422 (3)] [2427 (4)] [2432 (5)] [2437 (6)] โ
โ [2442 (7)] [2447 (8)] [2452 (9)] [2457 (10)] [2462 (11)] [2467 (12)] โ
โ [2472 (13)] โ
โ โ
โ Band5GHz: โ
โ [5180 (36)] [5200 (40)] [5220 (44)] [5240 (48)] [5260 (52)] [5280 (56)] โ
โ [5300 (60)] [5320 (64)] [5500 (100)] [5520 (104)] [5540 (108)] [5560 (112)] โ
โ [5580 (116)] [5600 (120)] [5620 (124)] [5640 (128)] [5660 (132)] [5680 (136)] โ
โ [5700 (140)] [5720 (142)] [5745 (149)] [5765 (153)] [5785 (157)] [5805 (161)] โ
โ [5825 (165)] โ
โ โ
โ โ
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
๐ฒ No target list provided... everything is a target ๐
๐ฒ No whitelist list provided.
======== Hop Channels ========
โ Band 5 Channels:
โ 36
โ 40
โ 44
โ 48
โ 52
โ 56
โ 60
โ 64
โ 68
โ 72
โ 76
โ 80
โ 84
โ 88
โ 92
โ 96
โ 100
โ 104
โ 108
โ 112
โ 116
โ 120
โ 124
โ 128
โ 132
โ 136
โ 140
โ 142
โ 149
โ 153
โ 157
โ 161
โ 165
โ 169
โ 173
โ 177
โ 181
==============================
๐ฒ Attack Rate: Normal (2)
๐ฒ Setting wlo1 down.
๐ฒ Randomizing wlo1 mac to 58324e148c6f
๐ฒ Setting wlo1 to Monitor mode. ("active" flag: false)
๐ฒ Setting wlo1 up.
๐ฒ OUI Records Imported: 50153
๐ฒ Sockets Opened [Rx: 5 | Tx: 6]
๐ฉ KICKING UP THE 4D3D3D3 ๐ฉ
======================================================================
thread 'main' panicked at /home/user/.cargo/registry/src/index.crates.io-6f17d22bba15001f/nl80211-ng-0.2.6/src/lib.rs:115:18:
called `Option::unwrap()` on a `None` value
stack backtrace:
0: rust_begin_unwind
at /rustc/82e1608dfa6e0b5569232559e3d385fea5a93112/library/std/src/panicking.rs:645:5
1: core::panicking::panic_fmt
at /rustc/82e1608dfa6e0b5569232559e3d385fea5a93112/library/core/src/panicking.rs:72:14
2: core::panicking::panic
at /rustc/82e1608dfa6e0b5569232559e3d385fea5a93112/library/core/src/panicking.rs:127:5
3: nl80211_ng::Nl80211::set_interface_chan
4: angryoxide::main
note: Some details are omitted, run with `RUST_BACKTRACE=full` for a verbose backtrace.
Expected behavior
Use only channels supported by the interface
Screenshots
** Hardware:**
Additional context
Supported Frequency list from adapter:
sudo iwlist wlo1 freq
wlo1 32 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Channel 36 : 5.18 GHz
Channel 40 : 5.2 GHz
Channel 44 : 5.22 GHz
Channel 48 : 5.24 GHz
Channel 52 : 5.26 GHz
Channel 56 : 5.28 GHz
Channel 60 : 5.3 GHz
Channel 64 : 5.32 GHz
Channel 100 : 5.5 GHz
Channel 104 : 5.52 GHz
Channel 108 : 5.54 GHz
Channel 112 : 5.56 GHz
Channel 116 : 5.58 GHz
Channel 120 : 5.6 GHz
Channel 124 : 5.62 GHz
Channel 128 : 5.64 GHz
Channel 132 : 5.66 GHz
Channel 136 : 5.68 GHz
Channel 140 : 5.7 GHz
Current Frequency:5.32 GHz (Channel 64)
Channels that AngryOxide tries to use when --band 5 option is provided:
======== Hop Channels ========
โ Band 5 Channels:
โ 36
โ 40
โ 44
โ 48
โ 52
โ 56
โ 60
โ 64
โ 100
โ 104
โ 108
โ 112
โ 116
โ 120
โ 124
โ 128
โ 132
โ 136
โ 140
โ 142
โ 149
โ 153
โ 157
โ 161
โ 165
โ 169
โ 173
==============================
hi,man,can you support windows?
I noticed there isn't any angry emoji's in the project. I hope you'll remedy this in an upcoming release.
After running successfully for a few minutes it shuts down saying "Error: network down". Using an Alfa AWUS036H running the precompiled binary angryoxide-linux-x86_64.tar.gz on kali linux
Also it would be nice to have a whitelist for networks you don't want to attack.
.
Describe the bug
AngryOxide does not run on TP-Link WN722N-V2 (8188eu chipset), it starts for about 3-4 seconds and then closes with the error messages shown below
To Reproduce
Steps to reproduce the behavior:
Expected behavior
AngryOxide should find networks and attack them
Screenshots
If applicable, add screenshots to help explain your problem.
** Hardware (please complete the following information):**
Additional context
Add any other context about the problem here.
โ$ sudo RUST_BACKTRACE=full angryoxide -i wlan1
Starting AngryOxide... ๐
๐ฒ Interface Summary:
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
โ Interface: wlan1 โ
โ Index: 4 | Driver: 8188eu โ
โ Mode: IftypeMonitor | Active Monitor: false โ
โ Modes: Adhoc, Station, Ap, Monitor, P2P Client, P2P Go โ
โ State: Dormant โ
โ Current Frequency: None โ
โ Enabled Bands/Channels: โ
โ โ
โ Band2GHz: โ
โ [2412 (1)] [2417 (2)] [2422 (3)] [2427 (4)] โ
โ [2432 (5)] [2437 (6)] [2442 (7)] [2447 (8)] โ
โ [2452 (9)] [2457 (10)] [2462 (11)] [2467 (12)] โ
โ [2472 (13)] โ
โ โ
โ โ
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
๐ฒ No target list provided... everything is a target ๐
๐ฒ No whitelist list provided.
======== Hop Channels ========
โ Band 2 Channels:
โ 1
โ 6
โ 11
==============================
๐ฒ Dwell Time: 2
๐ฒ Attack Rate: Normal (2)
๐ฒ Mouse Capture: true
๐ฒ Setting wlan1 down.
๐ฒ Randomizing wlan1 mac to e222476b0f14
๐ฒ Setting wlan1 to Monitor mode. ("active" flag: false)
๐ฒ Setting wlan1 up.
๐ฒ OUI Records Imported: 50153
๐ฒ Sockets Opened [Rx: 5 | Tx: 6]
๐ฉ KICKING UP THE 4D3D3D3 ๐ฉ
======================================================================
thread 'main' panicked at src/main.rs:1221:9:
Channel is None. Current Frequency: Frequency { frequency: None, width: Some(ChanWidth20Noht), channel: None, pwr: Some(1300) }
stack backtrace:
0: 0x5580b926b415 - <unknown>
1: 0x5580b929680b - <unknown>
2: 0x5580b9267b9f - <unknown>
3: 0x5580b926b1ee - <unknown>
4: 0x5580b926c909 - <unknown>
5: 0x5580b926c6aa - <unknown>
6: 0x5580b926cf0b - <unknown>
7: 0x5580b926cc84 - <unknown>
8: 0x5580b926b8d9 - <unknown>
9: 0x5580b926c9b7 - <unknown>
10: 0x5580b8dfcbe3 - <unknown>
11: 0x5580b8e1de01 - <unknown>
12: 0x5580b8e2523f - <unknown>
13: 0x5580b8ea7b43 - <unknown>
14: 0x5580b8e919b9 - <unknown>
15: 0x5580b926157d - <unknown>
16: 0x5580b8e3c125 - <unknown>
17: 0x7f0dfa641c8a - __libc_start_call_main
at ./csu/../sysdeps/nptl/libc_start_call_main.h:58:16
18: 0x7f0dfa641d45 - __libc_start_main_impl
at ./csu/../csu/libc-start.c:360:3
19: 0x5580b8dfd3fe - <unknown>
20: 0x0 - <unknown>
Hi,
Going over your code seems to confirm that the Hashcat .hc22000 file is only written once you quit the application and quit it cleanly.
For us that perhaps are going for multiple targets (ie. all) it would be much better that that the hc22000 file is written continuous doing the application running.
I've now had multiple times where it ran for let's say 2-3 days, unable to quit it cleanly as the "q" function did not work/respond and therefore i never get the hc22000 file.
It would be nice that it took the --output naming and then created a file just like the kismetdb and pcapng files but where it dumped (appended) the hc22000 strings everytime it was done collecting a full 4 way handshake for any device.
Hope that makes sense
Need to confirm I'm not doing any cheating when it comes to byte order when parsing frames.
Describe the bug
Hard to say, I was running angryoxide on a raspi02w in the field, power bank as a power supply with a Panda AWUS036ACS adapter. I've noticed that when I power on the raspi in my lab, where the default wifi network is located and configured with raspi-config (on the internal wifi interface, wlan0) then configure angryoxide to run on the adapter (panda0) and leave the lab -- I've noticed errors when I return to the lab, back into the environment where the NetworkManager service manages the wlan0 (Broadcom) wifi interface. I suspect this is causing an issue.
Screenshots
I was able to pull this:
`2024-04-20 22:57:29 UTC | Info | Sending Deauth: 86763f91c5a8 => ffffffffffff
๐ฒ Cleaning up...
..%%%%%
... .%%%%%%""
.%%%%%%%/%%%%%"
..... .%%%%%%%%%%%%%%\
..:::::::::::.. :;"" {_}\%%/%%%%%%..
.:::::::::::::::::. {_}/{_}%%%%%%%
::::::::::::::::::::: \\// """\::
::::::::::::::::::::::: \\//
---------------------....-----..--.....~------\//----
--------------__--.----...----...----..---__---\//----_
----------------...-----..--..---..-------\//-----____
---------------..--..-..----....-------\//-------
-----------------..----------.--------\//-----
----------------------------------\//------
---------------- \//
----__--____ ' \// _
__--- @ , " {_}
. '
========== Error: (GET_INTERFACE_STATUS 2) Error response received from netlink: No such device (os error 19) ==========
๐ฒ Setting alfa0 down.
๐ฒ Restoring alfa0 MAC back to 00c0cab5b7a8.
๐ฒ Setting alfa0 to station mode.
๐ฒ Stopping Threads
๐ Results:
[SBG8300-783D] : 4wHS: 1 | PMKID: 0
[RingOfSecurity-sXJM2Bdi/] : 4wHS: 1 | PMKID: 0
๐ฆ Creating Output Tarball (oxide-2024-04-20_22-52-27.tar.gz).
Please wait...
Complete! Happy Cracking! ๐ค`
** Hardware (please complete the following information):**
Respond to probe requests and complete authentication/association to get Rogue M2 from clients.
Describe the bug
It crashes right after the start:
thread 'main' panicked at src/main.rs:1095:48:
called Option::unwrap()
on a None
value
note: run with RUST_BACKTRACE=1
environment variable to display a backtrace
** Hardware (please complete the following information):**
The wlan drivers work as far as I can tell in other tools.
Regards and thanks for you effort
Await client frame indicating awake state. (PS-POLL, Null, QoS Null) and send a reassociation to AP from broadcast, resulting in a deauth-like behavior.
Hi,
I have this crash on Pinephone Pro with Kali Linux :
Attack Rate: Normal (2)
Setting wlani down.
Randomizing wlani mac to 18xxxxxx
Setting wlani to Monitor mode. ("active" flag: true)
Setting wlan1 up.
OUI Records Imported: 50153
thread 'main' panicked at src/rawsocks.rs: 138:43:
called Result:: unwrap()' on an 'Err" value: Other("Missing patch version component")
note: run with RUST_BACKTRACE=1 environment variable to display a backtrace
Latest kali linux nethunter pro and COMFAST CF926AC v2 (MT7612u), ALFA AWUS036ACS (RTL8812au), ALFA AWUS036ACM (MT7612u) i dont try other adapters.
Was looking around for better version of Fluxion and came across this. Was wondering if it works like Fluxion. everything is automated and user friendly
Trying to run it on a Pi 4 gives this error: Error | Couldn't read packet data with Radiotap: UnsupportedVersion. I built from source using the steps listed.
Expected behavior
Works normally running on a laptop on Kali, but installing on rpi gives the error Radiotap: UnsupportedVersion. As well as 0 ERs.
** Hardware (please complete the following information):**
Thanks
I am the developer of one popular pwnagotchi.ai fork. I've been following AO and I am intrigued. I would like to proposal what I think would be a new feature for AO taken from pwnagotchi: Use reinforcement learning to optimize probing and attacks. This would enable AO to more intelligently sweep through the parameter space (e.g., channels, lengths of time to listen) to maximize the chances of collecting handshakes.
I'd love to help out time permitting. Happy to clarify my proposed enhancement/feature if its not clear.
thread 'main' panicked at src/main.rs:1118:9:
Channel is None. Current Frequency: Frequency { frequency: None, width: Some(ChanWidth20Noht), channel: None, pwr: Some(2000) }
note: run with RUST_BACKTRACE=1
environment variable to display a backtrace
To Reproduce
Steps to reproduce the behavior:
sudo angryoxide --whitelist ~/working/config/whitelist.txt --interface wlan0 -b 2,5
** Hardware (please complete the following information):**
Additional context
about 10 seconds into launching the application, main thread panics and app terminates with the above output
Shortly, after launching application, program crashes.
To Reproduce
This only started occurring after running tool with additional channels to hop, that being 1,3,4,6,7,11,40,48
Prior to issue, I had ran the tool on default settings for quite a while with success.
Output
`sudo angryoxide --whitelist whitelist.txt -c 1,3,4,6,7,11,40,48 -i wlan0
Starting AngryOxide... ๐
๐ฒ Interface Summary:
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
โ Interface: wlan0 โ
โ Index: 6 | Driver: mt76x2u โ
โ Mode: IftypeMonitor | Active Monitor: true โ
โ Modes: Adhoc, Station, Ap, ApVlan, Monitor, MeshPoint, P2P Client, P2P Go โ
โ State: Dormant โ
โ Current Frequency: 5200 (40) โ
โ Enabled Bands/Channels: โ
โ โ
โ Band2GHz: โ
โ [2412 (1)] [2417 (2)] [2422 (3)] [2427 (4)] โ
โ [2432 (5)] [2437 (6)] [2442 (7)] [2447 (8)] โ
โ [2452 (9)] [2457 (10)] [2462 (11)] [2467 (12)] โ
โ [2472 (13)] [2484 (14)] โ
โ โ
โ Band5GHz: โ
โ [5180 (36)] [5200 (40)] [5220 (44)] [5240 (48)] โ
โ [5260 (52)] [5280 (56)] [5300 (60)] [5320 (64)] โ
โ [5500 (100)] [5520 (104)] [5540 (108)] [5560 (112)] โ
โ [5580 (116)] [5600 (120)] [5620 (124)] [5640 (128)] โ
โ [5660 (132)] [5680 (136)] [5700 (140)] [5720 (144)] โ
โ [5745 (149)] [5765 (153)] [5785 (157)] [5805 (161)] โ
โ [5825 (165)] โ
โ โ
โ โ
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
๐ฒ No target list provided... everything is a target ๐
========= White List =========
โ SSID: CenturyLink1665
โ SSID: CenturyLink1665_5G
========== Total: 2 ==========
๐ฒ Dwell Time: 2
๐ฒ Attack Rate: Normal (2)
๐ฒ Setting wlan0 down.
๐ฒ Randomizing wlan0 mac to 82516ed507c5
๐ฒ Setting wlan0 to Monitor mode. ("active" flag: true)
๐ฒ Setting wlan0 up.
๐ฒ OUI Records Imported: 50153
๐ฒ Sockets Opened [Rx: 5 | Tx: 6]
๐ฉ KICKING UP THE 4D3D3D3 ๐ฉ
======================================================================
thread 'main' panicked at src/main.rs:3002:37:
Could not open hashfile for writing. (zEQQ3XJPK+30/+aP.hc22000).
note: run with RUST_BACKTRACE=1
environment variable to display a backtrace
`
Backtrace output
stack backtrace: 0: 0x7d4a14 - std::backtrace_rs::backtrace::libunwind::trace::h077be8d17a343ba0 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/../../backtrace/src/backtrace/libunwind.rs:104:5 1: 0x7d4a14 - std::backtrace_rs::backtrace::trace_unsynchronized::he9bae998f19d1192 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/../../backtrace/src/backtrace/mod.rs:66:5 2: 0x7d4a14 - std::sys_common::backtrace::_print_fmt::h3cb0a25ea4e06fd3 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/sys_common/backtrace.rs:68:5 3: 0x7d4a14 - <std::sys_common::backtrace::_print::DisplayBacktrace as core::fmt::Display>::fmt::h4d40c874ac3055f9 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/sys_common/backtrace.rs:44:22 4: 0x817fcc - core::fmt::rt::Argument::fmt::h2aa676397f4d236d at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/core/src/fmt/rt.rs:142:9 5: 0x817fcc - core::fmt::write::hbc8bab57647a8d59 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/core/src/fmt/mod.rs:1120:17 6: 0x7d17f0 - std::io::Write::write_fmt::h6830a27da260044c at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/io/mod.rs:1810:15 7: 0x7d4840 - std::sys_common::backtrace::_print::h45e3ba4a460b54dc at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/sys_common/backtrace.rs:47:5 8: 0x7d4840 - std::sys_common::backtrace::print::ha90ccebd320c1f16 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/sys_common/backtrace.rs:34:9 9: 0x7d61dc - std::panicking::default_hook::{{closure}}::hea5e0840e75cbd54 10: 0x7d5efc - std::panicking::default_hook::h2da0c6e28ccefbb5 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/panicking.rs:292:9 11: 0x7d67b8 - <alloc::boxed::Box<F,A> as core::ops::function::Fn<Args>>::call::hadc01b877337b2a0 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/alloc/src/boxed.rs:2029:9 12: 0x7d67b8 - std::panicking::rust_panic_with_hook::he82b80ac427cd507 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/panicking.rs:783:13 13: 0x7d6530 - std::panicking::begin_panic_handler::{{closure}}::h9c22c275c948bda0 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/panicking.rs:657:13 14: 0x7d4ee4 - std::sys_common::backtrace::__rust_end_short_backtrace::hc10ef17bb01a2301 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/sys_common/backtrace.rs:171:18 15: 0x7d62d0 - rust_begin_unwind at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/panicking.rs:645:5 16: 0x4156c8 - core::panicking::panic_fmt::hefc208866c42565e at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/core/src/panicking.rs:72:14 17: 0x433174 - angryoxide::main::h19a9fbe428bacc64 18: 0x4b5610 - std::sys_common::backtrace::__rust_begin_short_backtrace::hc656463a074f5aff 19: 0x4b5930 - std::rt::lang_start::{{closure}}::h675a739bd481ad16 20: 0x7cb03c - core::ops::function::impls::<impl core::ops::function::FnOnce<A> for &F>::call_once::h0d9bdbcc7f85e49e at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/core/src/ops/function.rs:284:13 21: 0x7cb03c - std::panicking::try::do_call::h80136b13eeaadde3 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/panicking.rs:552:40 22: 0x7cb03c - std::panicking::try::h2ec3fb47f55f59f5 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/panicking.rs:516:19 23: 0x7cb03c - std::panic::catch_unwind::h9af58d1941f17a40 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/panic.rs:142:14 24: 0x7cb03c - std::rt::lang_start_internal::{{closure}}::hb93b3739319681a0 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/rt.rs:148:48 25: 0x7cb03c - std::panicking::try::do_call::hdaaeb7ab86a42ac4 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/panicking.rs:552:40 26: 0x7cb03c - std::panicking::try::ha4a5aa32de9945d2 at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/panicking.rs:516:19 27: 0x7cb03c - std::panic::catch_unwind::h403dd3017366017d at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/panic.rs:142:14 28: 0x7cb03c - std::rt::lang_start_internal::h3242d8687092278a at /rustc/07dca489ac2d933c78d3c5158e3f43beefeb02ce/library/std/src/rt.rs:148:20 29: 0x43cc24 - main
** Hardware (please complete the following information):**
Hello,
The previous version work well for me but the latest not get frames and find no network. STay blocked in frequency 5180 (36) just Ers continue to advance.
No error message.
I try 2 network adapter on intel and a Alfa.
The programme work a can (q) for quit.
I am in france if frequency region can influence.
Best regards
Hi we using 7" display and getting "window too small" error obviously. We like to use it on the go is there any way around this.
If you are unsure if this is a bug or expected behavior, feel free to ask in our Discord (https://discord.gg/QsEgaFndsQ)
Describe the bug
Hello i wanted to use AO on a raspberry pi 4 running raspbian, the external usb dongle works for connecting to AP but the point is I want to use wlan0 for connecting and wlan1 for scanning the networks.
If i type sudo ./angryoxide -i wlan1 i receive an error message interface not found.
Here is my ifconfig wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.43.106 netmask 255.255.255.0 broadcast 192.168.43.255
inet6 fe80::1a88:5807:61dc:28a8 prefixlen 64 scopeid 0x20
ether dc:a6:32:eb:f7:d4 txqueuelen 1000 (Ethernet)
RX packets 6962 bytes 356346 (347.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 10252 bytes 13075369 (12.4 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 94:44:52:27:ec:e8 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
the usb dongle is this one
Bus 001 Device 003: ID 050d:815f Belkin Components F5D8053 N Wireless USB Adapter v6000 [Realtek RTL8192SU]
any hint?
thanks in advance
To Reproduce
Steps to reproduce the behavior:
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
** Hardware (please complete the following information):**
Additional context
Add any other context about the problem here.
Hi,
From time to time I get this error in the output window. It does not appear to be a problem, but a hiccup that occurs and then continues to work as intended, however I thought I would share it with you anyway.
Error: "Netlink failure due to error: Wrapped IO error: No buffer space available (os error 105)
Screenshot: https://i.ibb.co/SQZBgr1/Screenshot-from-2024-01-25-09-52-50.png
I am using Alfa RTL8812AU Wifi adapters on my bare bones Kali Linux OS. Otherwise, it compiled with no issues, sees my GPS, and works as intended.
Thank You.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.