python-rtsp-client's Introduction

python-rtsp-client

A basic rtsp client writen in pure python

Getting Started

from rtsp import RTSPClient
myrtsp = RTSPClient(url='rtsp://username:password@hostname:port/path',callback=print)
try:
    myrtsp.do_describe()
    while myrtsp.state != 'describe':
        time.sleep(0.1)
    myrtsp.TRANSPORT_TYPE_LIST =  ['rtp_over_udp','rtp_over_tcp']
    myrtsp.do_setup(track_id)
    while myrtsp.state != 'setup':
        time.sleep(0.1)
    #Open socket to capture frames here
    myrtsp.do_play(rtsp.cur_range, rtsp.cur_scale)
except:
    myrtsp.do_teardown()

Examples

Usage: setupandplay.py [options] url

While running, you can control play by inputting "forward","backward","begin","live","pause"
or "play" a with "range" and "scale" parameter, such as "play range:npt=beginning- scale:2"
You can input "exit","teardown" or ctrl+c to quit


Options:
  -h, --help            show this help message and exit
  -t TRANSPORT, --transport=TRANSPORT
                        Set transport type when issuing SETUP: ts_over_tcp,
                        ts_over_udp, rtp_over_tcp, rtp_over_udp[default]
  -d DEST_IP, --dest_ip=DEST_IP
                        Set destination ip of udp data transmission, default
                        uses same ip as this rtsp client
  -p CLIENT_PORT, --client_port=CLIENT_PORT
                        Set client port range when issuing SETUP of udp,
                        default is "10014-10015"
  -n NAT, --nat=NAT     Add "x-NAT" when issuing DESCRIBE, arg format
                        "192.168.1.100:20008"
  -r, --arq             Add "x-Retrans:yes" when issuing DESCRIBE
  -f, --fec             Add "x-zmssFecCDN:yes" when issuing DESCRIBE
  -P, --ping            Just issue OPTIONS and exit.

Recommend Projects