reusserl/freeipmi-packagebuild-debian-docker

Build new freeipmi debian packages automatically from git master and publish them with aptly.

freeipmi-packagebuild-debian-docker

Build new freeipmi debian packages automatically from git master and publish them with aptly.

This is really just for easy testing new versions on debian based systems. Use stable versions on production systems!

1. Git clone

git clone [email protected]:reusserl/freeipmi-packagebuild-debian-docker.git

2. Build image

docker build --no-cache=true -t freeipmi-deb-builder freeipmi-packagebuild-debian-docker

3. Run image

docker run -d -p 8080:8080 freeipmi-deb-builder

4. Check if container is running

docker ps
CONTAINER ID        IMAGE                  COMMAND               CREATED              STATUS              PORTS                    NAMES
35a70af86df9        freeipmi-deb-builder   "bash /root/CMD.sh"   About a minute ago   Up About a minute   0.0.0.0:8080->8080/tcp   drunk_rosalind

5. Check logs or wair a few minutes till the build is finished

docker logs -f 35a70af86df9

Local repo freeipmi-testing has been successfully published.
Please setup your webserver to serve directory '/root/.aptly/public' with autoindexing.
Now you can add following line to apt sources:
  deb http://your-server/ testing main
Don't forget to add your GPG key to apt with apt-key.

You can also use `aptly serve` to publish your repositories over HTTP quickly.
Serving published repositories, recommended apt sources list:

# ./testing [amd64] publishes {main: [freeipmi-testing]: Freeipmi Testing Repository (from GIT master)}
deb http://35a70af86df9:8080/ testing main

Starting web server at: :8080 (press Ctrl+C to quit)...

6. Check if aptly repository is available

curl yourdockerhost.foo.bar:8080
<pre>
<a href="pool/">pool/</a>
<a href="dists/">dists/</a>
</pre>

7. Create apt sources.list

cat > /etc/apt/sources.list.d/freeipmi.list <<'EOF'
deb http://yourdockerhost.foo.bar:8080 testing main
EOF

8. Install freshly built packages

apt-get install --allow-unauthenticated -t testing freeipmi

9. Try it!

ipmi-sensors --output-sensor-state --interpret-oem-data --ignore-unrecognized-events
ID   | Name        | Type              | State    | Reading    | Units | Event
4    | CPU Temp    | OEM Reserved      | Nominal  | N/A        | N/A   | 'Low'
71   | System Temp | Temperature       | Nominal  | 33.00      | C     | 'OK'
138  | CPU Vcore   | Voltage           | Nominal  | 1.00       | V     | 'OK'
205  | CPU DIMM    | Voltage           | Nominal  | 1.51       | V     | 'OK'
272  | CPU Mem VTT | Voltage           | Nominal  | 0.75       | V     | 'OK'
339  | +1.1 V      | Voltage           | Nominal  | 1.10       | V     | 'OK'
406  | +1.8 V      | Voltage           | Nominal  | 1.85       | V     | 'OK'
473  | +5 V        | Voltage           | Nominal  | 5.12       | V     | 'OK'
540  | +12 V       | Voltage           | Nominal  | 11.87      | V     | 'OK'
607  | -12 V       | Voltage           | Nominal  | -11.80     | V     | 'OK'
674  | HT Voltage  | Voltage           | Nominal  | 1.19       | V     | 'OK'
741  | +3.3 V      | Voltage           | Nominal  | 3.34       | V     | 'OK'
808  | +3.3VSB     | Voltage           | Nominal  | 3.24       | V     | 'OK'
875  | VBAT        | Voltage           | Nominal  | 3.24       | V     | 'OK'
942  | FAN 1       | Fan               | N/A      | N/A        | RPM   | N/A
1009 | FAN 2       | Fan               | Nominal  | 4096.00    | RPM   | 'OK'
1076 | FAN 3       | Fan               | Nominal  | 4096.00    | RPM   | 'OK'
1143 | FAN 4       | Fan               | Nominal  | 4096.00    | RPM   | 'OK'
1210 | FAN 5       | Fan               | Nominal  | 3600.00    | RPM   | 'OK'
1277 | FAN 6       | Fan               | Nominal  | 3600.00    | RPM   | 'OK'
1344 | Intrusion   | Physical Security | Critical | N/A        | N/A   | 'General Chassis Intrusion'
1411 | PS Status   | Power Supply      | Nominal  | N/A        | N/A   | 'Presence detected'