rzmudzin / doubango Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/doubango
Automatically exported from code.google.com/p/doubango
What steps will reproduce the problem?
1.Try to establish an MSRP session between 2 Boghe client with an ALG in
between which modifies the MSRP URI in the a=path attribute but doesn't change
the From-Path and To-Path headers in the MSRP packets
2.Communication over MSRP is not possible
I understand that draft-ietf-simple-msrp-sessmatch-10.txt is not implemented
and is in the roadmap. Can you point me to the code that matches the MSRP URI
in the MSRP packets with the MSRP URI negotiated in the SDP? I will try and
relax the rules for MSRP URI comparison to make sess-match work.
I saw tdav_session_msrp.c and there is a function match_offer which just
returns tsk_true. Is this the function used for session matching?
Thanks,
Umang
Thanks,
Umang
Original issue reported on code.google.com by [email protected]
on 7 Apr 2011 at 9:23
What steps will reproduce the problem?
1. Create a tinyHTTP session
2. Make a GET request to a non-existant domain name with 'thttp_action_GET'
3. Wait for connection failure
What is the expected output? What do you see instead?
The connection failure should lead to a non-zero return code. Instead, a 0
value is returned.
What version of the product are you using? On what operating system?
I am using the SVN revision 413.
Please provide any additional information below.
In function 'thttp_dialog_send_request', the return code should be set when a
connection failure occurs (following the connectto) or when the socket
writability test failed.
Original issue reported on code.google.com by [email protected]
on 14 Jun 2010 at 12:15
What steps will reproduce the problem?
1.A SIP header with multi line
2.tsip_message_parse would be fail
eg.
WWW-Authenticate: Digest realm="ims.com",(CRLF here)
nonce="2dKTzX37hxIvBkoFXv8/PA==",algorithm=MD5,qop="auth"
"nonce" would be taken as a header then the parser runs fail
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 4 Dec 2010 at 7:06
Hello! I've spent some time and implemented the YUV2RGB conversion
library(http://wss.co.uk/pinknoise/yuv2rgb) port from the Theorarm code, it
gives some sensible performance boost on my devices, although I lack the good
instruments to calculate the exact value of it. Anyway, it can be switched on
and off using the USE_ASM_YUV2RGB debug switch. Attached is the patch for 469
revision of doubango although I doubt much has changed since that moment so I
think it would be applicable with small to no changes to the current trunk.
Check it out.
Original issue reported on code.google.com by [email protected]
on 12 Oct 2010 at 12:33
Attachments:
The following patch contains:
- An amended CoreAudio consumer (a few tweaks and comments)
- A full CoreAudio producer
- Naming and comments corrections
Original issue reported on code.google.com by [email protected]
on 22 Jun 2010 at 1:22
Attachments:
i'm prefer to bonge ims client under vc++ not c#, have any scheduled?
i wanna know why use vc++ 9.0 in server, c# in client?
thanks
Original issue reported on code.google.com by [email protected]
on 15 Feb 2011 at 5:39
[deleted issue]
when imsdroid receive incoming call,and answer,then hangup.
REASON:
when receive ACK from peer,tinysip create transaction for this dialog,then dialog object ref will increase.
but dialog object ref will not decrease when hangup.
so the relative object(for example dialog object) will not free.
BUG FIX:
tinySIP/src/dialogs/tsip_dialog_layer.c
tsip_dialog_layer_handle_incoming_msg.
transac = tsip_transac_layer_new(layer_transac, tsk_false, message,
TSIP_DIALOG(dialog));
tsk_object_unref(dialog);
======>
if (!strcasecmp(message->CSeq->method,"ACK")) {
ret = dialog->callback(dialog, tsip_dialog_i_msg, message);
tsk_object_unref(dialog);
goto bail;
} else {
transac = tsip_transac_layer_new(layer_transac, tsk_false, message, TSIP_DIALOG(dialog));
tsk_object_unref(dialog);
}
Original issue reported on code.google.com by [email protected]
on 21 Oct 2010 at 9:38
Below code snippet breaks the addCaps method in low-level Doubango SWIG API and
causes OPTIONS to be missing an important 'Contact: ' header. addCaps should
append the 'capabilities' to the 'Contact: ' header but since it's not there
due to the code below, it creates multiple lines of 'Accept-Contact: '
headers...
The code section that needs to be checked is here. To fix it for OPTIONS, I
simply commented out and took the lower default behavior to get a 'Contact: '
header and manually create an 'Accept-Contact: ' header.
tsip_dialog.c - Line 175 (code snippet):
switch(request->line.request.request_type){
case tsip_MESSAGE:
case tsip_PUBLISH:
case tsip_BYE:
case tsip_OPTIONS:
{
if(request->line.request.request_type == tsip_PUBLISH) {
TSIP_MESSAGE_ADD_HEADER(request, TSIP_HEADER_EXPIRES_VA_ARGS(TSK_TIME_MS_2_S(self->expires)));
}
/* add caps in Accept-Contact headers */
tsk_list_foreach(item, self->ss->caps) {
const tsk_param_t* param = TSK_PARAM(item->data);
char* value = tsk_null;
tsk_sprintf(&value, "*;%s%s%s",
param->name,
param->value ? "=" : "",
param->value ? param->value : "");
if(value) {
TSIP_MESSAGE_ADD_HEADER(request, TSIP_HEADER_DUMMY_VA_ARGS("Accept-Contact", value));
TSK_FREE(value);
}
}
break;
}
Original issue reported on code.google.com by [email protected]
on 19 May 2011 at 3:46
What steps will reproduce the problem?
1. We intend to use imsdroid1.x with doubango2.x, at least temporarily
2. Any known gotchas that we have to be aware of?
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 20 May 2011 at 3:33
[deleted issue]
[deleted issue]
Here is the update project file for Mac OS X. It includes the changes for
tinyDAV which were pretty important in the last revisions.
The project folder is to be placed under "<ROOT>/xcode/MacOSX".
Original issue reported on code.google.com by [email protected]
on 18 Aug 2010 at 2:48
Attachments:
dear Team,
i am new in IMS & want to start work for symbian application with IM using IMS.
please provide help if possible-
1.how to start work for symbian os in IMS
2.please provide the source code & document for symbian.
3.Any other help could be appreciable.
so,kind of you.
thanks in advance!
regards,
satish
Original issue reported on code.google.com by [email protected]
on 6 Dec 2010 at 1:56
What steps will reproduce the problem?
1.make a call to a phone which is binding with other number, and it send back a
update message.
2.
3.
What is the expected output? What do you see instead?
ignore the update package,hand off the phone.
What version of the product are you using? On what operating system?
version:doubangoSVN578 ,os:android2.2.
Please provide any additional information below.
how to response the "UPDATE" message?
thanks,sir.
Original issue reported on code.google.com by [email protected]
on 20 Jun 2011 at 2:01
[deleted issue]
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
Please use labels and text to provide additional information.
Original issue reported on code.google.com by [email protected]
on 7 Jun 2011 at 7:49
What steps will reproduce the problem?
1. Attached is a trace when PRACK is enabled
2. A calls B and A hangs up
3.
What is the expected output? What do you see instead?
BYE should have a CSeq number higher than PRACK's CSeq
But here it is the same, which is in violation of RFC 3261
According to RFC 3261 section 12.2.1.1
Requests within a dialog MUST contain strictly monotonically
increasing and contiguous CSeq sequence numbers (increasing-by-one)
in each direction (excepting ACK and CANCEL of course, whose numbers
equal the requests being acknowledged or cancelled). Therefore, if
the local sequence number is not empty, the value of the local
sequence number MUST be incremented by one, and this value MUST be
placed into the CSeq header field. If the local sequence number is
empty, an initial value MUST be chosen using the guidelines of
Section 8.1.1.5. The method field in the CSeq header field value
MUST match the method of the request.
BYE is re-using the same CSeq number as that used in PRACK as indicated in the
trace below
SENDING from network to pcsf(1)
[PRACK
sip:QbkRBthOEgsTXgkTBA0HHiUrKz1CQEFCQ0NMNgQMGAlsMTcgK2ghOyAnOCs.ITogYX9jZGV4PjUq
dFVXXlsbV1tbWERLQkwOFgcACBNGCgUGVlheWUA_@pcsf-stdn.imsgroup0-000.ims.demo.alcate
l-lucent.com:5060 SIP/2.0
Via: SIP/2.0/UDP 127.0.0.1;branch=z9hG4bK_001_3797762552-3794627768
Via: SIP/2.0/UDP
192.168.10.145:40627;received=10.8.0.62;branch=z9hG4bK1286255543346;rport=40627
From: <sip:[email protected]>;tag=1284673043811
To:
<sip:[email protected]>;tag=4ca4a2a9-1285859926621769-gm-
po-lucentPCSF-000019
Contact:
<sip:[email protected]:40627;transport=udp>;+g.oma.sip-im;language="en
,fr"
Call-ID: 73aa1663-edeb-decc-faba-8dd855649505
CSeq: 1908602408 PRACK
Content-Length: 0
Max-Forwards: 69
Route: <sip:192.11.69.128:5060;lr;transport=udp>
Route: <sip:pcsf-stdn.imsgroup0-000.ims.demo.alcatel-lucent.com:5060;lr;bidx=0>
Route:
<sip:scsf-stdn.imsgroup0-000.ims.demo.alcatel-lucent.com:5070;lr;ottag=ue_orig;b
idx=12>
P-Preferred-Service: urn:urn-7:3gpp-service.ims.icsi.mmtel
Allow: INVITE,ACK,CANCEL,BYE,MESSAGE,OPTIONS,NOTIFY,PRACK,UPDATE,REFER
Privacy: none
P-Access-Network-Info: ADSL;utran-cell-id-3gpp=00000000
User-Agent: IM-client/OMA1.0 IMSDroid/v1.0.292 (doubango r487)
RAck: 1 1908602407 INVITE
]
SENDING from network to pcsf(1)
[BYE
sip:QbkRBthOEgsTXgkTBA0HHiUrKz1CQEFCQ0NMNgQMGAlsMTcgK2ghOyAnOCs.ITogYX9jZGV4PjUq
dFVXXlsbV1tbWERLQkwOFgcACBNGCgUGVlheWUA_@pcsf-stdn.imsgroup0-000.ims.demo.alcate
l-lucent.com:5060 SIP/2.0
Via: SIP/2.0/UDP 127.0.0.1;branch=z9hG4bK_001_3800387512-3797172088
Via: SIP/2.0/UDP
192.168.10.145:40627;received=10.8.0.62;branch=z9hG4bK1284531147919;rport=40627
From: <sip:[email protected]>;tag=1284673043811
To:
<sip:[email protected]>;tag=4ca4a2a9-1285859926621769-gm-
po-lucentPCSF-000019
Call-ID: 73aa1663-edeb-decc-faba-8dd855649505
CSeq: 1908602408 BYE
Content-Length: 0
Max-Forwards: 69
Accept-Contact: *;+g.oma.sip-im
Accept-Contact: *;language="en,fr"
P-Preferred-Service: urn:urn-7:3gpp-service.ims.icsi.mmtel
Allow: INVITE,ACK,CANCEL,BYE,MESSAGE,OPTIONS,NOTIFY,PRACK,UPDATE,REFER
Privacy: none
P-Access-Network-Info: ADSL;utran-cell-id-3gpp=00000000
User-Agent: IM-client/OMA1.0 IMSDroid/v1.0.292 (doubango r487)
]
What version of the product are you using? On what operating system?
IMSDroid v1.0.292 doubango r487
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 12 Oct 2010 at 10:06
What steps will reproduce the problem?
1. in some case ,we want to get video I frame to display the video, this is a
standard , that ,when we canot decode the video we should send video frame
update request, as such ,we use INFO method in sip,
i have learn the doubango stack , the flow should be that : video session make
a video frame update event ,
the sip stack get the event and send a info request which sdp is a xml ,
but i donot know how to info from tdav_session_video to sip stack as there is
no struct which hold the video session and sip stack, so , please give me some
hint ,
thanks :)
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 15 Jul 2011 at 8:13
[deleted issue]
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 18 May 2011 at 11:01
If FFMpeg is not available, then the Theora codec should not be built. There is
a missing pre-processor statement to guard the build in the
"tdav_codec_theora.c" file. The code should be surrounded by "#if HAVE_FFMPEG"
and "#endif"
Original issue reported on code.google.com by [email protected]
on 18 Aug 2010 at 8:01
What steps will reproduce the problem?
1. Create a tinyHTTP session
2. Make a request to a domain
3. When the response include an "Etag" header, and it contains "W/"
'thttp_header_ETag_parse' runs fail
ex:
Etag: W/"1231-3213213"
Original issue reported on code.google.com by [email protected]
on 28 Oct 2010 at 11:14
What steps will reproduce the problem?
1. Use IMSDROID to send a REGISTER
2. 401 Authorized is back and nonce is taken in WWW-authenticate header
3. but no nonce in the second REGISTER message
What is the expected output? What do you see instead?
It is expected nonce is put in Authorization header of REGISTER
What version of the product are you using? On what operating system?
v1.0.263
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 25 Aug 2010 at 6:20
What steps will reproduce the problem?
1.just call tsip_uri_parse("sip:123.com", strlen(~));
2.function return 0(null)
What is the expected output? What do you see instead?
expect output is a valid tsip_uri_t pointer with
type:sip, host:123.com
but it return 0(null), and log invalid "Failed to parse SIP/SIPS/TEL URI."
What version of the product are you using? On what operating system?
Last version of doubango, Windows VC2008,
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 26 May 2011 at 2:36
The function "tsip_timers_setc(uint32_t c)" is mispelled in "tsip_timers.c": it
should be "tsip_timers_setC" with a capital 'C'.
Original issue reported on code.google.com by [email protected]
on 17 Aug 2010 at 7:50
What steps will reproduce the problem?
1. Checked out r491 version of doubango
2. Opened tinyDEMO.sln in Visual Studio 2008
3. Missing Project dependencies and libraries caused the build to fail
What is the expected output? What do you see instead?
Compile of the solution files should have succeded in the first attempt
Certain projects that depended on tinySAK, as an example, were compiled ahead
of tinySAK and thus failed. Attached is a revised tinyDEMO.sln
file where I have tried to resolve the inter-project dependency issues so that
the solution compiles on the first attempt.
Also, dsound.lib and dxguid.lib that were expected by tinyDAV were missing.
These files need to be copied into
thirdparties\win32\lib\directshow\
After this, the project compiles clean.
What version of the product are you using? On what operating system?
Visual Studio 2008 Standard Edition on Windows Vista 32-bit
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 9 Oct 2010 at 9:25
Attachments:
Here is an update of the iOS 4.0 project files with an up-to-date source tree.
Original issue reported on code.google.com by [email protected]
on 29 Jun 2010 at 7:46
Attachments:
What steps will reproduce the problem?
1. I add zoom and scrool function for video call.
2. Affter that, i make video call (using H.264 codec).
3. Then trying zoom and scrool video
What is the expected output? What do you see instead?
The zoom is OK. But when i moving the video on screen it not effect. Then i
trying to resize the image. I got problem: decode H.264
What version of the product are you using? On what operating system?
IMSdroid 2x/Android 2.2
Please provide any additional information below.
Original issue reported on code.google.com by hoangdinhtrung
on 8 Jun 2011 at 5:07
I use swig command to generate tinyWRAP_wrap.cxx under
"oubango\bindings\_common".
command:swig -c++ -o tinyWRAP_wrap.cxx -package org.doubango.tinyWRAP -java
tinyWRAP.i
But i get the new tinyWRAP_wrap.cxx file with "doubango\bindings\java\android
\tinyWRAP_wrap.cxx" have a lot of unlike, and run
"bindings/java/android/buildAll.sh" not generate .so file
Please provide any additional information below.
I'm will very thanks.
Original issue reported on code.google.com by [email protected]
on 11 Jan 2011 at 9:44
Add support for Diameter protocol as per RFC 3588.
Original issue reported on code.google.com by [email protected]
on 18 Nov 2010 at 2:40
What steps will reproduce the problem?
1. In tsip_dialog_invite.server.c, 302 response is added for call redirection.
Contact header is added for redirect uri. However, after 302 is sent, the
domain name of Contact header is changed to local ip address.
What is the expected output? What do you see instead?
Expected to see Contact header containing target URI without replacing. Now the
domain name of the target URI is replaced by local IP address.
What version of the product are you using? On what operating system?
Lastest code compiled with Imsdroid to run on Android 2.2.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 11 Feb 2011 at 2:04
What steps will reproduce the problem?
1. If 100rel support is disabled (PRACK)
2.
3.
What is the expected output? What do you see instead?
Currently even if 100rel support is not enabled, PRACK is advertised as being
supported. Here is a proposed patch
Index: include/tinysip/headers/tsip_header_Allow.h
===================================================================
--- include/tinysip/headers/tsip_header_Allow.h (revision previous)
+++ include/tinysip/headers/tsip_header_Allow.h (revision new)
@@ -36,6 +36,7 @@
TSIP_BEGIN_DECLS
#define TSIP_HEADER_ALLOW_DEFAULT "ACK, BYE, CANCEL, INVITE, MESSAGE, NOTIFY, OPTIONS, PRACK, REFER, UPDATE"
+#define TSIP_HEADER_ALLOW_NOPRACK "ACK, BYE, CANCEL, INVITE, MESSAGE,
NOTIFY, OPTIONS, REFER, UPDATE"
#define TSIP_HEADER_STR "Allow:"TSIP_HEADER_ALLOW_DEFAULT"\r\n"
///////////////////////////////////////////////////////////////////////////////
/////////////////////
Index: src/dialogs/tsip_dialog_invite.c
===================================================================
--- src/dialogs/tsip_dialog_invite.c (revision previous)
+++ src/dialogs/tsip_dialog_invite.c (revision new)
@@ -1135,10 +1135,17 @@
}
/* Add Allow header */
- tsip_message_add_headers(response,
+ if(self->supported._100rel){
+ tsip_message_add_headers(response,
TSIP_HEADER_DUMMY_VA_ARGS("Allow", TSIP_HEADER_ALLOW_DEFAULT),
tsk_null
);
+ } else {
+ tsip_message_add_headers(response,
+
TSIP_HEADER_DUMMY_VA_ARGS("Allow", TSIP_HEADER_ALLOW_NOPRACK),
+ tsk_null
+ );
+ }
}
ret = tsip_dialog_response_send(TSIP_DIALOG(self), response);
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 14 Oct 2010 at 12:55
Only on windows(please see visual studio configuration)
Original issue reported on code.google.com by [email protected]
on 22 Jan 2011 at 2:38
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
Please use labels and text to provide additional information.
Original issue reported on code.google.com by [email protected]
on 16 Jun 2011 at 1:47
What steps will reproduce the problem?
1. Look at the specs 9.2.2.3 SMS-STATUS-REPORT type. Note that TP-PI and
following parameters are optional.
2. Look at the _tsms_tpdu_status_report_deserialize function in
tsms_tpdu_status_report.c
3. Note that TSMS_ERROR_TOO_SHORT is called if optional parameters are missing.
What is the expected output? What do you see instead?
Absence of optional parameters is not an error but it is handled as an error:
2011-02-23 08:37:25,699 ERROR [6] BogheCore.Services.Impl.SipService:0 -
***ERROR: function: "_tsms_tpdu_status_report_deserialize()"
file: ".\src\tpdu\tsms_tpdu_status_report.c"
line: "132"
MSG: SMS-STATUS-REPORT == Data too short.
What version of the product are you using? On what operating system?
The error is seen in the code r551. The error appears in logs of Boghe-alpha
(1.0.58.550) under Windows 7.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 23 Feb 2011 at 11:45
Is it possible to expose the following define in the public API ?
- TXCAP_MIME_TYPE_ELEMENT
- TXCAP_MIME_TYPE_ATTRIBUTE
- TXCAP_MIME_TYPE_NS
- TXCAP_MIME_TYPE_ERROR
They are currently defined in "txcap_action.c".
Original issue reported on code.google.com by [email protected]
on 17 Aug 2010 at 7:52
Hello! I'm trying to open boghe application in vs2010 for developing in
winphone7 platform.... and there are issues with converting! How can i fix
this, or how else i can develop my application for winphone7 using doubango???
Original issue reported on code.google.com by [email protected]
on 7 Jun 2011 at 2:02
Hi Sir
I am using ngn- stack source download from http://imsdroid.googlecode.com/svn/branches/2.0/ tjis link.
it is build properly and make audio call successfull.
but the problem is there when we make vedio call . we have unable to make vedio
call. so plz sir help me.
Thanks
Saurabh Shukla
Original issue reported on code.google.com by [email protected]
on 4 Jul 2011 at 1:11
What steps will reproduce the problem?
1.Is there any possibility of moving the current ffmpeg on doubango to the
latest ffmpeg code?
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
I want to use the ffmpeg 0.7.1 for my app which is built on doubango stack. Can
I please get the detailed instructions on how to build the ffmpeg libraries for
android using Mingw(windows machine).
Original issue reported on code.google.com by [email protected]
on 15 Jul 2011 at 1:30
[deleted issue]
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 18 May 2011 at 11:00
There is a potential memory in the "tsk_thread_create" function.
The first parameter is a pointer on a memory zone that will store the newly
started thread handle. On Unix platform (with pthread), the pointed zone is
allocated on the heap, but the deallocation only occurs if the
"tsk_thread_join" is called.
Is it possible to add a note that specifies that the pointed zone needs to be
freed by the caller in order to avoid memory leaks, either by calling
"tsk_thread_join" or by freeing it ?
Original issue reported on code.google.com by [email protected]
on 22 Jun 2010 at 1:07
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
Please use labels and text to provide additional information.
Original issue reported on code.google.com by [email protected]
on 27 Jun 2011 at 8:18
[deleted issue]
[deleted issue]
Here is an update of the Mac OS X 10.5 project files with an up-to-date source
tree.
Original issue reported on code.google.com by [email protected]
on 29 Jun 2010 at 7:45
Attachments:
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
Please use labels and text to provide additional information.
Original issue reported on code.google.com by [email protected]
on 4 Jun 2011 at 7:26
What steps will reproduce the problem?
1. svn checkout http://doubango.googlecode.com/svn/branches/2.0
2. build doubango with the same procedure of trunk on linux
3.
What is the expected output? What do you see instead?
build libtinyDAV failed on tdav.c
traces :
(cd ../tinyDAV ; make -f droid-makefile all; cp -f libtinyDAV_armv5te.a
/home/pverney/dev/imsdroid/doubango.V2.x/doubango/android-projects/output)
make[1]: entrant dans le répertoire «
/home/pverney/dev/imsdroid/doubango.V2.x/doubango/tinyDAV »
arm-eabi-gcc-4.4.0 -c -DDEBUG_LEVEL=DEBUG_LEVEL_INFO
-DDEBUG_LEVEL=DEBUG_LEVEL_INFO
-I/home/pverney/dev/imsdroid/android-ndk-r4/build/platforms/android-8/arch-arm/u
sr/include -msoft-float -fpic -mthumb-interwork -ffunction-sections
-funwind-tables -fstack-protector -D__ARM_ARCH_5__ -D__ARM_ARCH_5T__
-D__ARM_ARCH_5E__ -D__ARM_ARCH_5TE__ -MMD -MP -fno-short-enums -DANDROID
-march=armv5te -mtune=xscale -Os -fomit-frame-pointer -fno-strict-aliasing
-finline-limit=64 -DANDROID -static -I../thirdparties/android/include
-DHAVE_ILBC=0 -DHAVE_LIBGSM=1 -DHAVE_FFMPEG=1 -DHAVE_H264=1 -DHAVE_THEORA=1
-DHAVE_LIB_SPEEX=0 -DHAVE_SPEEX_DSP=0 -DHAVE_OPENCORE_AMR=1 -DHAVE_G729=0
-I../tinySAK/src -I../tinyNET/src -I../tinySDP/include -I../tinyRTP/include
-I../tinyMEDIA/include -I../tinyMSRP/include -I./include -DJB_HISTORY_SIZE=500
src/tdav.c -o src/tdav.o
In file included from src/tdav.c:86:
./include/tinydav/audio/tdav_speakup_jitterbuffer.h:34:43: error:
tinymedia/tmedia_JitterBuffer.h: No such file or directory
make[1]: *** [src/tdav.o] Erreur 1
What version of the product are you using? On what operating system?
Doubango branches 2.x
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 29 Apr 2011 at 11:47
In LTE context, it would be nice not to have to redefine the following
constants and that Doubango provides them with #define directives:
- Strings for Event and Allow-Events headers: presence, reg, presence.winfo,
etc.
- Strings for MIME type: application/reginfo+xml, application/watcherinfo+xml,
etc.
Maybe, it could be merged with some constants found in XCAP.
Original issue reported on code.google.com by [email protected]
on 18 Aug 2010 at 2:36
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.