s-ol/vcvmods

Plugins for VCV Rack. Designed for Oscilloscope Music

vcvrack/s-ol

Plugins for VCV Rack. Designed for Oscilloscope Music
An introductory guide video can be found here.

Circle VCO

Sinewave VCO with 90° phase output for drawing circles on an Oscilloscope (+-5V). Phase output (0-5V) for drawing spirals etc.

Wrapping Comparator

Compares 0-5V signal with reference value in range. CV for Offset and Range. Two output values can be chosen for the output states (+-8V each).

Modulo

Modulo/Wrapping for +5V signals. Signal is amplified and wrapped around to 0V every time it touches 5V. Wrapped output 0-5V, staircase output with stepped waveform in original scale.

vcvmods's Issues

Mac Version

Hey. I've compiled mac versions of your Rack modules if you wish to add them to your release page.

solmods-0.5.1-mac.zip

Archive root folder does not match slug

The root folder of the plugin archive does not match the slug:

Slug: s-ol
Folder: solmods

Rack community repo issue reference

v1 is missing plugin.json

plugin.json is missing from the repository. Plugin cannot be integrated in the plugin manager.

Makefile: change DIST_NAME to "s-ol"

vcvmods/Makefile

Line 20 in 617af54

DIST_NAME = Template

wrong pitch formula

I think your formula is wrong to calculate the pitch. If I dial down the pitch knob to 0, the output frequency is 187.5 Hz. So this is the base frequency, with 0V at the 1V/oct input. But if I apply 1 V, the frequency changes to 387.5 Hz, but it should use the base frequency and multiple this, not adding the 200 Hz multiplied with the CV signal.
For example if I use the VCO-1 from Fundamental and set it to 111 Hz. Then I apply 1 V to V/OCT and it changes to 222 Hz. See here for the formula:
https://github.com/VCVRack/Fundamental/blob/v0.6/src/VCO.cpp#L37