Name: sajid ali
Type: User
Company: US-Pakistan Center for Advanced Studies in Energy, National University of Science and Technology Pakistan
Bio: Senior Systems Quality Assurance Engineer
Graduated from the National University of Science and Technology, Islamabad
Twitter: Ganaygari
Location: gilgit pakistan
Blog: www.sajidco.com
sajid ali's Projects
Implementation of an sPWM signal
Measure the percent THD from a logged Voltage/Current signal in MATLAB
adding deadtime for Single phase fullbridge inverter
Linear droop control, non linear droop control and variable dc domestic load model
A simple python script that recognises faces and mark attendance for the recognised faces in an excel sheet.
Final Year Dissertation Project by Asis Rai
A MNIST-like fashion product database. Benchmark :point_right:
Application of LQR and LQG techniques to obtain a suitable response with an optimal input for a gantry crane modelled with two suspended masses.
Get unix time in simulnk for time stamp. Get system time into simulink for logging purposes.
Grid codes address the interconnection of generation systems to the grid and require these systems to remain connected under certain fault situations to "ride through". These demos show common workflows for electric utilities and equipment designers.
rgb to gray, then filter then binarize and selective crop
show image open drag to crop tool and then set xlabel and ylabel on figure
induction machine tests DC test, No load test, Blocked Rotor Test
JTAG library for Arduino
The JTAGduino project has the goal of using Arduino as a JTAG interface.
Yes, your Arduino can replace an expensive JTAG cable!
Learning GitHub
implements low voltage right through with state flow in Simulink
this project detects motion and sends an email alert with time and date of motion detection. Hardware: Raspberry pi and PIR motion sensor
Hardware implementation and simulation of 500W boost converter MPPT(solar/wind)
Open Source Computer Vision Library
Testing OTA update for bulk system update feature
This shows an example for how to do pll for grid tied inverter synchonization
In this file, power factor has been calculated using the formula; power factor=Real_power/Apparent power.
Measuring power frequency by zero crossing detection method
prepare data in template format for thd analysis , keywords: power frequency fft , powergui
PV_Maximum_power_point_tracking by traditional incremental conductance method along with a boost converter
In this project i used Arduino microcontroller to interface simulink with the hardware. Simulink file contain monitoring and control blocks from which hardware can be controlled in realtime.