sakaki-/bcmrpi3-kernel-bis

Automated weekly build of the default branch 64-bit bcmrpi3_defconfig (+ tweaks) Linux kernel for the RPi3 B / B+

bcmrpi3-kernel-bis's Issues

Consider enabling CONFIG_SENSORS_RPI_POE_FAN

It would be nice to have the POE HAT fan working.
The system gets quite hot without it.

Adjust kernel optimization patchfile for 4.19.y

Note to self - the 4.14.y build optimization patchfile (harmlessly) fails to apply on 4.19.y. Need to fix this.

Has this become discontinued?

Has this become discontinued?

Question: Support for mSATA SSD

Hi sakaki, my apologies for using issues to ask a question.

I've been trying out your Gentoo build on my newly acqiured RPi 3 B+ for which I've bought one of these. It comes with an extenion that allows an external mSATA SSD which for which I've purchased a Samsung 860.

However, upon trying it out I'm unable to find a way to get Gentoo to recognize the device. I see no trace of it through dmesg or anywhere else.

Would I need to compile my own kernel with some additional support to allow for drive to be recognized and mounted?

Thank you for your work.

SD_HOST Drivers

Hi sakaki,

have a look here regarding the following error message on boot:
[ 3.788708] Error: Driver 'sdhost-bcm2835' is already registered, aborting...

Happens on RPI3 with 64 bit kernel, if default bcmrp33_defconfig is used.

Docker support?

First: Thank you for your amazing work bringing gentoo (or a 64bit OS in general) on the raspberry pi 3/4.
Now to my problem/question: The docker daemon crashes on my pi because it can't setup iptables. Additionally it warns about the modules 'bridge' and 'ip_tables' not being available. I'm pretty sure there are even more kernel configs that need to be changed to have docker running, but I'm not really sure a) what needed to be changed (but I think I could look this up in the docker ebuild) b) and where I could change these things.