Nuvoton tools official website
Debugger
- KEIL Nu-Link debugger driver installer
- IAR Nu-Link debugger driver installer
- NuEclipse installer
- PinView installer
- Customized pyOCD source code (using adapter firmware "NuLink2_DAPLink.bin")
- Customized openOCD source code (using adapter firmware "NuLink2FW.bin")
NuTool: Coding assistant
- ICPTool installer
- ISPTool installer
- ISPTool source code
- ISPTool command set
- NuLink command tool installer
When using debugging and programming tool above, you need an USB adapter. We introduce you a new feature-rich Nu-Link2 adapter here.
User can switch between roles that Nu-Link2 play by re-programming Nu-Link2 to another .bin file
All Nu-Link2 firmware image (.bin files) can be found here
- Press the button on Nu-Link2 and plug in USB cable.
- A "Nu-Link2" disk will show. (If you see disk name is "NuMicro MCU", it will upgrade DUT firmware instead of Nu-Link2 itself)
- Drag and drop Nu-Link2 image .bin into the disk.
- Re-plug the USB cable and it's done.
- Proprietary code (except NuLink2FW.bin, most of Nu-Link2 firmware are open source)
- USB interfaces HID(proprietary commands)/MSC/VCOM
- Support NuMicro 8051, offline programming, user code read-out protection, unlimited flash break points, NuMicro chips specific features (config0/config1 dataflash setting, KPROM, etc.)
- This is the latest image built from DAPLink on Nu-Link2
- USB interfaces HID(CMSIS-DAP commands)/MSC/VCOM
- Support many 3rd party IDE
- This is the latest image built from CMSIS-DAP on Nu-Link2
- If you don't need rich features of DAPLink, this is the light weight choice of CMSIS-DAP firmware.
- This is the latest image built from NuLink2_ISP_Bridge
- ISP bridge firmware is also integrated into NuLink2FW.bin, so ISP tool can connect with NuLink2FW.bin, too.
- The target ISP loader code can be found at directory "BSP/SampleCode/ISP/" of each BSP. BSP can be found at https://github.com/OpenNuvoton or https://gitee.com/OpenNuvoton.
- This is the latest image built from NuLink2_ISPLink2
- The target ISP loader code can be found at directory "BSP/SampleCode/ISP/" of each BSP. BSP can be found at https://github.com/OpenNuvoton or https://gitee.com/OpenNuvoton.
- This is the latest image built from ICP library
- ICPLib (two-wire ICP interface for NuMicro cortexM & 8051) on Nu-Link2 (M48SKIDAE)
- This is the latest image built from NuLink2_Bus_Monitor