The EventFlow library suite allows applications to define what diagnostics data to collect, and where they should be outputted to. Diagnostics data can be anything from performance counters to application traces. It runs in the same process as the application, so communication overhead is minimized. It also has an extensibility mechanism so additional inputs and outputs can be created and plugged into the framework. It comes with the following inputs and outputs:
Inputs
- Trace (a.k.a. System.Diagnostics.Trace)
- EventSource
- PerformanceCounter
- Serilog
- Microsoft.Extensions.Logging
- ETW (Event Tracing for Windows)
- Application Insights
Outputs
- StdOutput (console output)
- Application Insights
- Azure EventHub
- Elasticsearch
- OMS (Operations Management Suite)
The EventFlow suite supports .NET applications and .NET Core applications. It allows diagnostic data to be collected and transferred for applications running in these Azure environments:
- Azure Web Apps
- Service Fabric
- Azure Cloud Service
- Azure Virtual Machines
The core of the library, as well as inputs and outputs listed above are available as NuGet packages.
- To quickly get started, you can create a simple console application in VisualStudio and install the Nuget package Microsoft.Diagnostics.EventFlow.
- After the nuget package is installed, there should be a eventFlowConfig.json file added to the project. This file contains default configuration for the EventFlow pipeline. A few sections with optional configuration elements are commented outs. These sections can be enabled as desired. Here is what the file looks like
{
"inputs": [
// {
// "type": "EventSource",
// "sources": [
// { "providerName": "Microsoft-Windows-ASPNET" }
// ]
// },
{
"type": "Trace",
"traceLevel": "Warning"
}
],
"filters": [
{
"type": "drop",
"include": "Level == Verbose"
}
],
"outputs": [
// Please update the instrumentationKey.
{
"type": "ApplicationInsights",
"instrumentationKey": "00000000-0000-0000-0000-000000000000"
}
],
"schemaVersion": "2016-08-11",
// "healthReporter": {
// "type": "CsvHealthReporter",
// "logFileFolder": ".",
// "logFilePrefix": "HealthReport",
// "minReportLevel": "Warning",
// "throttlingPeriodMsec": "1000"
// },
// "settings": {
// "pipelineBufferSize": "1000",
// "maxEventBatchSize": "100",
// "maxBatchDelayMsec": "500",
// "maxConcurrency": "8",
// "pipelineCompletionTimeoutMsec": "30000"
// },
"extensions": []
}
Note: if your project file has VisualStudio 2017 format (with PackageReference) the eventFlowConfig.json file will not be automatically added. To fix this you can just copy the example listed above and save it under the name "eventFlowConfig.json" in your project folder. Then, open your project file (this assumes you are using Visual Studio 2017/MSBuild 15 csproj-based project system) and add the following snippet to your project:
<ItemGroup>
<None Include="eventFlowConfig.json">
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
</None>
</ItemGroup>
- If you wish to send diagnostics data to Application Insights, fill in the value for the instrumentationKey. If not, simply remove the Application Insights section.
- To add a StdOutput output, install the Microsoft.Diagnostics.EventFlow.Outputs.StdOutput nuget package. Then add the following in the outputs array in eventFlowConfig.json:
{
"type": "StdOutput"
}
- Create an EventFlow pipeline in your application code using the code below. Make sure there is at least one output defined in the configuration file. Run your application and see your traces in console output or Application Insights.
using (var pipeline = DiagnosticPipelineFactory.CreatePipeline("eventFlowConfig.json"))
{
System.Diagnostics.Trace.TraceWarning("EventFlow is working!");
Console.ReadLine();
}
The EventFlow pipeline is built around three core concepts: inputs, outputs, and filters. The number of inputs, outputs, and filters depend on the need of diagnostics. The configuration also has a healthReporter and settings section for configuring settings fundamental to the pipeline operation. Finally, the extensions section allows declaration of custom developed plugins. These extension declarations act like references. On pipeline initialization, EventFlow will search extensions to instantiate custom inputs, outputs, or filters.
These define what data will flow into the engine. At least one input is required. Each input type has its own set of parameters.
Nuget Package: Microsoft.Diagnostics.EventFlow.Inputs.Trace
This input listens to traces written with System.Diagnostics.Trace API. Here is an example showing all possible settings:
{
"type": "Trace",
"traceLevel": "Warning"
}
Field | Values/Types | Required | Description |
---|---|---|---|
type |
"Trace" | Yes | Specifies the input type. For this input, it must be "Trace". |
traceLevel |
Critical, Error, Warning, Information, Verbose, All | No | Specifies the collection trace level. Traces with equal or higher severity than specified are collected. For example, if Warning is specified, then Critial, Error, and Warning traces are collected. Default is Error. |
Nuget Package: Microsoft.Diagnostics.EventFlow.Inputs.EventSource
This input listens to EventSource traces. EventSource classes can be created in the application by deriving from the System.Diagnostics.Tracing.EventSource class. Here is an example showing all possible settings:
{
"type": "EventSource",
"sources": [
{
"providerName": "MyEventSource",
"level": "Informational",
"keywords": "0x7F"
}
]
}
Top object
Field | Values/Types | Required | Description |
---|---|---|---|
type |
"EventSource" | Yes | Specifies the input type. For this input, it must be "EventSource". |
sources |
JSON array | Yes | Specifies the EventSource objects to collect. |
Source object (element of the sources array)
Field | Values/Types | Required | Description |
---|---|---|---|
providerName |
EventSource name | Yes(*) | Specifies the name of the EventSource to track. |
providerNamePrefix |
EventSource name prefix | Yes(*) | Specifies the name prefix of EventSource(s) to track. For example, if the value is "Microsoft-ServiceFabric", all EventSources that have names starting with Microsoft-ServiceFabric (Microsoft-ServiceFabric-Services, Microsoft-ServiceFabric-Actors and so on) will be tracked. |
disabledProviderNamePrefix |
provider name | Yes(*) | Specifies the name prefix of the EventSource(s) that must be ignored. No events from these sources will be captured(***). |
level |
Critial, Error, Warning, Informational, Verbose, LogAlways | No(**) | Specifies the collection trace level. Traces with equal or higher severity than specified are collected. For example, if Warning is specified, then Critial, Error, and Warning traces are collected. Default is LogAlways, which means "provider decides what events are raised", which usually results in all events being raised. |
keywords |
An integer | No(**) | A bitmask that specifies what events to collect. Only events with keyword matching the bitmask are collected, except if it's 0, which means everything is collected. Default is 0. |
Remarks
(*) Out of providerName
, providerNamePrefix
and disabledProviderNamePrefix
, only one can be used for a single source. In other words, with a single source one can enable an EventSource by name, or enable a set of EventSources by prefix, or disable a set of EventSources by prefix.
(**) level
and keywords
can be used for enabling EventSources, but not for disabling them. Disabling events using level and keywords is not supported (but one can use level and/or keywords to selectively enable a subset of events from a given EventSource).
(***) There is an issue with .NET frameworks 4.6 and 4.7, and .NET Core framework 1.1 and 2.0 where dynamically created EventSource events are dispatched to all listeners, regardless whether listeners subscribe to events from these EventSources; for more information see https://github.com/dotnet/coreclr/issues/14434 disabledProviderNamePrefix
property can be usesd to suppress these events.
Disabling EventSources is not recommended under normal circumstances, as it introduces a slight performance penalty. Instead, selectively enable necessary events through combination of EventSource names, event levels, and keywords.
Nuget Package: Microsoft.Diagnostics.EventFlow.Inputs.PerformanceCounter
This input enables gathering data from Windows performance counters. Only process-specific counters are supported, that is, the counter must have an instance that is associated with the current process. For machine-wide counters use an external agent such as Azure Diagnostics Agent or create a custom input.
Finding the counter instance that corresponds to the current process
In general there is no canonical way to find a performance counter instance that corresponds to current process. Two methods are commonly used in practice:
-
A special performance counter that provides instance name to process ID mapping. This solution involves a set of counters that use the same instance name for a given process. Among them there is a special counter with a value that is the process ID of the corresponding process. Searching for the instance of the special counter with a value equal to the current process ID allows to discover what the instance name is used for the current process. Examples of this approach include the Windows Process category (special counter "ID Process") and all .NET counters (special counter "Process ID" in the ".NET CLR Memory" category).
-
Process ID can be encoded directly into the instance name. .NET performance counters can use this approach when ProcessNameFormat flag is set in the in the registry.
EventFlow PerformanceCounter input supports the first method of deterimining counter instance name for current process via configuration settings. It also supports the second method, but only for .NET performance counters.
Configuration example
{
"type": "PerformanceCounter",
"sampleIntervalMsec": "5000",
"counters": [
{
"counterCategory": "Process",
"counterName": "Private Bytes"
},
{
"counterCategory": ".NET CLR Exceptions",
"counterName": "# of Exceps Thrown / sec"
}
]
}
Top-level configuration settings
Field | Values/Types | Required | Description |
---|---|---|---|
type |
"PerformanceCounter" | Yes | Specifies the input type. For this input, it must be "PerformanceCounter". |
sampleIntervalMsec |
integer | No | Specifies the sampling rate for the whole input (in milliseconds). This is the rate at which the collection loop for the whole input executes. Default is 10 seconds. |
counters |
JSON array of Counter objects | Yes | Specifies performance counters to collect data from. |
Counter class
Field | Values/Types | Required | Description |
---|---|---|---|
counterCategory |
string | Yes | Category of the performance counter to monitor |
counterName |
string | Yes | Name of the counter to monitor. |
collectionIntervalMsec |
integer | No | Sampling interval for the counter. Values for the counter are read not more often than at this rate. Default is 30 seconds. |
processIdCounterCategory and processIdCounterName |
string | No | The category and name of the performance counter that provides process ID to counter instance name mapping. It is not necessary to specify these for the "Process" counter category and for .NET performance counters. |
useDotNetInstanceNameConvention |
boolean | No | Indicates that the counter instance names include process ID as described in ProcessNameFormat documentation. |
Important usage note
Some performance counters require the user to be a member of the Performance Monitor Users system group. This can manifest itself by health reporter reporting "category does not exist" errors from PerformanceCounter output, despite the fact that the category and counter are properly configured and clearly visible in Windows Performance Monitor. If you need to consume such counters, make sure the account your process runs under belongs to Performance Monitor Users group.
Nuget package: Microsoft.Diagnostics.EventFlow.Inputs.Serilog
This input enables capturing diagnostic data created through Serilog library.
Configuration example The Serilog input has no configuration, other than the "type" property that specifies the type of the input (must be "Serilog"):
{
"type": "Serilog"
}
Example: instantiating a Serilog logger that uses EventFlow Serilog input
using System;
using System.Linq;
using Microsoft.Diagnostics.EventFlow;
using Serilog;
namespace SerilogEventFlow
{
class Program
{
static void Main(string[] args)
{
using (var pipeline = DiagnosticPipelineFactory.CreatePipeline(".\\eventFlowConfig.json"))
{
Log.Logger = new LoggerConfiguration()
.WriteTo.EventFlow(pipeline)
.CreateLogger();
Log.Information("Hello from {friend} for {family}!", "SerilogInput", "EventFlow");
Log.CloseAndFlush();
Console.ReadKey();
}
}
}
}
Nuget package: Microsoft.Diagnostics.EventFlow.Inputs.MicrosoftLogging
This input enables capturing diagnostic data created through Microsoft.Extensions.Logging library and ILogger interface.
Configuration example The ILogger input has no configuration, other than the "type" property that specifies the type of the input (must be "Microsoft.Extensions.Logging"):
{
"type": "Microsoft.Extensions.Logging"
}
Example: instantiating a ILogger that uses EventFlow ILogger input
using Microsoft.Diagnostics.EventFlow;
using Microsoft.Extensions.Logging;
namespace LoggerEventFlow
{
class Program
{
static void Main(string[] args)
{
using (var pipeline = DiagnosticPipelineFactory.CreatePipeline(".\\eventFlowConfig.json"))
{
var factory = new LoggerFactory()
.AddEventFlow(pipeline);
var logger = new Logger<Program>(factory);
using (logger.BeginScope(myState))
{
logger.LogInformation("Hello from {friend} for {family}!", "LoggerInput", "EventFlow");
}
}
}
}
}
Example: using EventFlow ILogger input with ASP.NET Core The following example shows how to enable EventFlow ILogger inside a Service Fabric stateless service that uses ASP.NET Core.
- Modify the service class so that its constructor takes a
DiagnosticPipeline
instance as a parameter:
private static void Main()
{
try
{
using (ManualResetEvent terminationEvent = new ManualResetEvent(initialState: false))
using (var pipeline = ServiceFabricDiagnosticPipelineFactory.CreatePipeline("CoreBasedFabricPlusEventFlow-Diagnostics"))
{
Console.CancelKeyPress += (sender, eventArgs) => Shutdown(diagnosticsPipeline, terminationEvent);
AppDomain.CurrentDomain.UnhandledException += (sender, unhandledExceptionArgs) =>
{
ServiceEventSource.Current.UnhandledException(unhandledExceptionArgs.ExceptionObject?.ToString() ?? "(no exception information)");
Shutdown(diagnosticsPipeline, terminationEvent);
};
ServiceRuntime.RegisterServiceAsync("Web1Type",
context => new Web1(context, pipeline)).GetAwaiter().GetResult();
ServiceEventSource.Current.ServiceTypeRegistered(Process.GetCurrentProcess().Id, typeof(Web1).Name);
terminationEvent.WaitOne();
}
}
catch (Exception e)
{
ServiceEventSource.Current.ServiceHostInitializationFailed(e.ToString());
throw;
}
}
private static void Shutdown(IDisposable disposable, ManualResetEvent terminationEvent)
{
try
{
disposable.Dispose();
}
finally
{
terminationEvent.Set();
}
}
- In the CreateServiceInstanceListeners() method add the pipeline as a singleton service to ASP.NET dependency injection container
protected override IEnumerable<ServiceInstanceListener> CreateServiceInstanceListeners()
{
return new ServiceInstanceListener[]
{
new ServiceInstanceListener(serviceContext =>
new WebListenerCommunicationListener(serviceContext, "ServiceEndpoint", (url, listener) =>
{
ServiceEventSource.Current.ServiceMessage(serviceContext, $"Starting WebListener on {url}");
return new WebHostBuilder().UseWebListener()
.ConfigureServices(
services => services
.AddSingleton<StatelessServiceContext>(serviceContext)
.AddSingleton<DiagnosticPipeline>(this.diagnosticPipeline))
.UseContentRoot(Directory.GetCurrentDirectory())
.UseStartup<Startup>()
.UseApplicationInsights()
.UseServiceFabricIntegration(listener, ServiceFabricIntegrationOptions.None)
.UseUrls(url)
.Build();
}))
};
}
- In the Startup class configure the loggerFactory by calling AddEventFlow on it:
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory)
{
loggerFactory.AddConsole(Configuration.GetSection("Logging"));
loggerFactory.AddDebug();
var diagnosticPipeline = app.ApplicationServices.GetRequiredService<DiagnosticPipeline>();
loggerFactory.AddEventFlow(diagnosticPipeline);
app.UseMvc();
}
- Now you can assume the logger factory will be constructor-injected into your controllers:
[Route("api/[controller]")]
public class ValuesController : Controller
{
private readonly ILogger<ValuesController> logger;
public ValuesController(ILogger<ValuesController> logger)
{
this.logger = logger;
}
// GET api/values
[HttpGet]
public IEnumerable<string> Get()
{
this.logger.LogInformation("Hey, someone just called us!");
return new string[] { "value1", "value2" };
}
// (rest of controller code is irrelevant)
Nuget package: Microsoft.Diagnostics.EventFlow.Inputs.Etw
This input captures data from Microsoft Event Tracing for Windows (ETW) providers. Both manifest-based providers as well as providers based on managed EventSource
infrastructure are supported. The data is captured machine-wide and requires that the identity the process uses belongs to Performance Log Users built-in administrative group.
Note
To capture data from EventSources running in the same process as EventFlow, the EventSource input is a better choice, with better performance and no additional security requirements.
Configuration example
{
"type": "ETW",
"providers": [
{
"providerName": "Microsoft-ServiceFabric",
"level": "Warning",
"keywords": "0x7F"
}
]
}
Top Object
Field | Values/Types | Required | Description |
---|---|---|---|
type |
"ETW" | Yes | Specifies the input type. For this input, it must be "ETW". |
providers |
JSON array | Yes | Specifies ETW providers to collect data from. |
Providers object
Field | Values/Types | Required | Description |
---|---|---|---|
providerName |
provider name | Yes(*) | Specifies the name of the ETW provider to track. |
providerGuid |
provider GUID | Yes(*) | Specifies the GUID of the ETW provider to track. |
level |
Critial, Error, Warning, Informational, Verbose, LogAlways | No | Specifies the collection trace level. Traces with equal or higher severity than specified are collected. For example, if Warning is specified, then Critial, Error, and Warning traces are collected. Default is LogAlways, which means "provider decides what events are raised", which usually results in all events being raised. |
keywords |
An integer | No | A bitmask that specifies what events to collect. Only events with keyword matching the bitmask are collected, except if it's 0, which means everything is collected. Default is 0. |
(*) Either providerName, or providerGuid must be specified. When both are specified, provider GUID takes precedence.
Nuget package: Microsoft.Diagnostics.EventFlow.Inputs.ApplicationInsights
Application Insights input is designed for the following scenario:
- You have an application that uses Application Insights for monitoring and diagnostics.
- You want to send a portion of your Application Insights telemetry to some destination other than Application Insights (e.g. Azure EventHub or Elasticsearch; the assumption is there is an EventFlow output for where the data needs to go).
For example, you might want to leverage Application Insights sampling capabilities to reduce the amount of data analyzed by Application Insights without losing analysis fidelity, while sending full raw logs to Elasticsearch to do detailed log search during problem troubleshooting.
Usage
-
Add the
EventFlowTelemetryProcessor
to your Application Insights configuration file (it goes intoTelemetryProcessors
element):<ApplicationInsights xmlns="http://schemas.microsoft.com/ApplicationInsights/2013/Settings" > <!-- ... --> <TelemetryProcessors> <!-- ... --> <Add Type="Microsoft.Diagnostics.EventFlow.ApplicationInsights.EventFlowTelemetryProcessor, Microsoft.Diagnostics.EventFlow.Inputs.ApplicationInsights" /> <!-- ... --> </TelemetryProcessors> <!-- ... --> </ApplicationInsights>
Note that the order of telemetry processors does matter. In particular, if the
EventFlowTelemetryProcessor
is placed before the Application Insights sampling processor, EventFlow will capture all telemetry, but if theEventFlowTelemetryProcessor
is placed after the sampling processor, it will only "see" telemetry that was sampled in. For more information on configuring Application Insights see Application Insights configuration documentation. -
In the EventFlow configuration make sure to include the Application Insights input. It does not take any parameters:
{ "type": "ApplicationInsights" }
-
In your application code, after the EventFlow pipeline is created, find the
EventFlowTelemetryProcessor
and set itsPipeline
property to the instance of the EventFlow pipeline:using (var pipeline = DiagnosticPipelineFactory.CreatePipeline("eventFlowConfig.json")) { // ... EventFlowTelemetryProcessor efTelemetryProcessor = TelemetryConfiguration.Active.TelemetryProcessors.OfType<EventFlowTelemetryProcessor>().First(); efTelemetryProcessor.Pipeline = pipeline; // ... }
This is it-after the EventFlowTelemetryProcessor.Pipeline
property is set, the EventFlowTelemetryProcessor
will start sending AI telemetry into the EventFlow pipeline.
Application Insights input supports all standard Application Insights telemetry types: trace, request, event, dependency, metric, exception, page view and availability.
Outputs define where data will be published from the engine. It's an error if there are no outputs defined. Each output type has its own set of parameters.
Nuget Package: Microsoft.Diagnostics.EventFlow.Outputs.StdOutput
This output writes data to the console window. Here is an example showing all possible settings:
{
"type": "StdOutput"
}
Field | Values/Types | Required | Description |
---|---|---|---|
type |
"StdOutput" | Yes | Specifies the output type. For this output, it must be "StdOutput". |
Nuget Package: Microsoft.Diagnostics.EventFlow.Outputs.EventHub
This output writes data to the Azure Event Hub. Here is an example showing all possible settings:
{
"type": "EventHub",
"eventHubName": "myEventHub",
"connectionString": "Endpoint=sb://<myEventHubNamespace>.servicebus.windows.net/;SharedAccessKeyName=RootManageSharedAccessKey;SharedAccessKey=<MySharedAccessKey>"
}
Field | Values/Types | Required | Description |
---|---|---|---|
type |
"EventHub" | Yes | Specifies the output type. For this output, it must be "EventHub". |
eventHubName |
event hub name | No | Specifies the name of the event hub. |
connectionString |
connection string | Yes | Specifies the connection string for the event hub. The corresponding shared access policy must have send permission. If the event hub name does not appear in the connection string, then it must be specified in the eventHubName field. |
Nuget Package: Microsoft.Diagnostics.EventFlow.Outputs.ApplicationInsights
This output writes data to the Azure Application Insights service. Here is an example showing all possible settings:
{
"type": "ApplicationInsights",
"instrumentationKey": "00000000-0000-0000-0000-000000000000",
"configurationFilePath": "path-to-ApplicationInsights.config"
}
Field | Values/Types | Required | Description |
---|---|---|---|
type |
"ApplicationInsights" | Yes | Specifies the output type. For this output, it must be "ApplicationInsights". |
instrumentationKey |
GUID | No | Specifies the instrumentation key for the targeted Application Insights resource. The key is in the form of a GUID. The key can be found on the Application Insights blade in Azure Portal. The value in this field overrides any value in the Application Insights configuration file (see the configurationFilePath parameter below). If configurationFilePath is not set, instrumentation key must be specified. |
configurationFilePath |
string | No | Specifies the path to Application Insights configuration file. This parameter is optional-if no value is specified, default configuration for the Application Insights output will be used. For more information see Application Insights documentation |
In Service Fabric environment the Application Insights configuration file can should be part of the default service configuration package (the 'Config' package). To resolve the path of the configuration file within the service configuration package set the value of configurationFilePath
to servicefabricfile:/ApplicationInsights.config
. For more information on this syntax see Service Fabric support
Standard metadata support
Application Insights output supports all standard metadata (request, metric, dependency and exception). Each of these metadata types corresponds to a native Application Insights telemetry type, enabling rich support for visualization and alerting that Application Insights provides. The Application Insights output also supports event metadata (corresponding to AI event telemetry type). This metadata is meant to represent significant application events, like a new user registered with the system or a new version of the code being deployed. Event metadata supports following properties:
Field | Values/Types | Required | Description |
---|---|---|---|
metadata |
"ai_event" | Yes | Indicates Application Insights event metadata; must be "ai_event". |
eventNameProperty |
string | (see Remarks) | The name of the event property that will be used as the name of the AI event telemetry. |
eventName |
string | (see Remarks) | The name of the event (if the name is supposed to be taken verbatim from metadata). |
Remarks:
- Either
eventNameProperty
oreventName
must be given.
All other events will be reported as Application Insights traces (telemetry of type Trace).
Nuget Package: Microsoft.Diagnostics.EventFlow.Outputs.ElasticSearch
Note: Nuget package version 1.x supports Elasticsearch version 2.x. Nuget package version 2.x supports Elasticsearch version 5.x
This output writes data to the Elasticsearch. Here is an example showing all possible settings:
{
"type": "ElasticSearch",
"indexNamePrefix": "app1",
"serviceUri": "https://myElasticSearchCluster:9200",
"basicAuthenticationUserName": "esUser1",
"basicAuthenticationUserPassword": "<MyPassword>",
"eventDocumentTypeName": "diagData",
"numberOfShards": 1,
"numberOfReplicas": 1,
"refreshInterval": "15s"
}
Field | Values/Types | Required | Description |
---|---|---|---|
type |
"ElasticSearch" | Yes | Specifies the output type. For this output, it must be "ElasticSearch". |
indexNamePrefix |
string | No | Specifies the prefix to be used when creating the Elasticsearch index. This prefix, together with the date of when the data was generated, will be used to form the name of the Elasticsearch index. If not specified, a prefix will not be used. |
serviceUri |
URL:port | Yes | Specifies where the Elasticsearch cluster is. This is needed for EventFlow to locate the cluster and send the data. |
basicAuthenticationUserName |
string | No | Specifies the user name used to authenticate with Elasticsearch. To protect the cluster, authentication is often setup on the cluster. |
basicAuthenticationUserPassword |
string | No | Specifies the password used to authenticate with Elasticsearch. This field should be used only if basicAuthenticationUserName is specified. |
eventDocumentTypeName |
string | Yes | Specifies the document type to be applied when data is written. Elasticsearch allows documents to be typed, so they can be distinguished from other types. This type name is user-defined. |
numberOfShards |
int | No | Specifies how many shards to create the index with. If not specified, it defaults to 1. |
numberOfReplicas |
int | No | Specifies how many replicas the index is created with. If not specified, it defaults to 5. |
refreshInterval |
string | No | Specifies what refresh interval the index is created with. If not specified, it defaults to 15s. |
Standard metadata support
Elasticsearch output supports all standard metadata types. Events decorated with metadata will get additional properties when sent to Elasticsearch.
Fields injected by metric
metadata are:
Field | Description |
---|---|
MetricName |
The name of the metric, read directly from the metadata. |
Value |
The value of the metric, read from the event property specified by metricValueProperty . |
Fields injected byt the request
metadata are:
Field | Description |
---|---|
RequestName |
The name of the request, read the event property specified by requestNameProperty . |
Duration |
Request duration, read from the event property specified by durationProperty (if available). |
IsSuccess |
Success indicator, read from the event property specified by isSuccessProperty (if available). |
ResponseCode |
Response code for the request, read from the event property specified by responseCodeProperty (if available). |
Nuget package: Microsoft.Diagnostics.EventFlow.Outputs.Oms
The OMS output writes data to Operations Management Suite Log Analytics workspaces. You will need to create a Log Analytics workspace in Azure and know its ID and key before using OMS output. Here is a sample configuration fragment enabling the output:
{
"type": "OmsOutput",
"workspaceId": "<workspace-GUID>",
"workspaceKey": "<base-64-encoded workspace key>"
}
Supported configuration settings are:
Field | Values/Types | Required | Description |
---|---|---|---|
type |
"OmsOutput" | Yes | Specifies the output type. For this output, it must be "OmsOutput". |
workspaceId |
string (GUID) | Yes | Specifies the workspace identifier. |
workspaceKey |
string (base-64) | Yes | Specifies the workspace authentication key. |
logTypeName |
string | No | Specifies the log entry type created by the output. Default value for this setting is "Event", which results in "Event_CL" entries being created in OMS (the "_CL" suffix is appended automatically by OMS ingestion service). |
As data comes through the EventFlow pipeline, the application can add extra processing or tagging to them. These optional operations are accomplished with filters. Filters can transform, drop, or tag data with extra metadata, with rules based on custom expressions. With metadata tags, filters and outputs operating further down the pipeline can apply different processing for different data. For example, an output component can choose to send only data with a certain tag. Each filter type has its own set of parameters.
Filters can appear in two places in the EventFlow configuration: on the same level as inputs and outputs (global filters) and as part of output declaration (output-specific filters). Global filters are applied to all data coming from the inputs. Output-specific filters are applied to just one output, just before the data reaches the output. Here is an example with two global filters and one output-specific filter:
{
"inputs": [...],
"filters": [
// The following are global filters
{
"type": "drop",
"include": "..."
},
{
"type": "drop",
"include": "..."
}
],
"outputs": [
{
"type": "ApplicationInsights",
"instrumentationKey": "00000000-0000-0000-0000-000000000000",
"filters": [
{
"type": "metadata",
"metadata": "metric",
// ...
}
]
}
]
}
EventFlow comes with two standard filter types: drop
and metadata
.
Nuget Package: Microsoft.Diagnostics.EventFlow.Core
This filter discards all data that satisfies the include expression. Here is an example showing all possible settings:
{
"type": "drop",
"include": "Level == Verbose || Level == Informational"
}
Field | Values/Types | Required | Description |
---|---|---|---|
type |
"drop" | Yes | Specifies the filter type. For this filter, it must be "drop". |
include |
logical expression | Yes | Specifies the logical expression that determines if the action should apply to the event data or not. For information about the logical expression, please see section Logical Expressions. |
Nuget Package: Microsoft.Diagnostics.EventFlow.Core
This filter adds additional metadata to all event data that satisfies the include expression. The filter recognizes a few standard properties (type
, metadata
and include
); the rest are custom properties, specific for the given metadata type:
{
"type": "metadata",
"metadata": "metric",
"include": "ProviderName == MyEventProvider && EventId == 3",
"customTag1": "tag1",
"customTag2": "tag2"
}
Field | Values/Types | Required | Description |
---|---|---|---|
type |
"metadata" | Yes | Specifies the filter type. For this filter, it must be "metadata". |
metadata |
string | Yes | Specifies the metadata type. This field is used only if type is "metadata", so it shouldn't appear in other filter types. The metadata type is user-defined and is persisted along with metadata tag added to the event data. |
include |
logical expression | Yes | Specifies the logical expression that determines if the metadata is applied to the event data. For information about the logical expression, please see section Logical Expressions. |
[others] | string | No | Specifies custom properties that should be added along with this metadata object. When the event data is processed by other filters or outputs, these properties can be accessed. The names of these properties are custom-defined and the possible set is open-ended. For a particular filter, zero or more custom properties can be defined. In the example above, customTag1 and customTag2 are such properties. |
Here are a few examples of using the metadata filter:
-
Submit a metric with a value of 1 (a counter) whenever there is a Service Fabric stateful service run failure
{ "type": "metadata", "metadata": "metric", "include": "ProviderName==Microsoft-ServiceFabric-Services && EventName==StatefulRunAsyncFailure", "metricName": "StatefulRunAsyncFailure", "metricValue": "1.0" }
-
Turn processor time performance counter into a metric
{ "type": "metadata", "metadata": "metric", "include": "ProviderName==EventFlow-PerformanceCounterInput && CounterCategory==Process && CounterName==\"% Processor Time\"", "metricName": "MyServiceProcessorTimePercent", "metricValueProperty": "Value" }
-
Turn a custom EventSource event into a request. The event has 3 interesting properties: requestTypeName indicates what kind of request it was; durationMsec has the total request processing duration and โisSuccessโ indicates whether the processing succeeded or failed
{ "type": "metadata", "metadata": "request", "include": "ProviderName==MyCompany-MyApplication-FrontEndService && EventName==ServiceRequestStop", "requestNameProperty": "requestTypeName", "durationProperty": "durationMsec", "isSuccessProperty": "isSuccess" }
EventFlow core library defines several standard metadata types. They have pre-defined set of fields and are recognized by Application Insights and Elasticsearch outputs (see documentation for each output, respectively, to learn how they handle standard metadata).
Metric metadata type
Metrics are named time series of floating-point values. Metric metadata defines how metrics are derived from ordinary events. Following fields are supported:
Field | Values/Types | Required | Description |
---|---|---|---|
metadata |
"metric" | Yes | Indicates metric metadata definition; must be "metric". |
metricName |
string | Yes | The name of the metric. |
metricValue |
double | (see Remarks) | The value of the metric. This is useful for "counter" type of metric when each occurrence of a particular event should result in an increment of the counter. |
metricValueProperty |
string | (see Remarks) | The name of the event property that holds the metric value. |
Remarks:
- Either
metricValue
ormetricValueProperty
must be specified.
Request metadata type
Requests are special events that represent invocations of a network service by its clients. Request metadata defines how requests are derived from ordinary events. Following fields are supported:
Field | Values/Types | Required | Description |
---|---|---|---|
metadata |
"request" | Yes | Indicates request metadata definition; must be "request". |
requestNameProperty |
string | Yes | The name of the event property that contanis the name of the request (to distinguish between different kinds of requests). |
isSuccessProperty |
string | No | The name of the event property that specifies whether the request ended successfully. It is expected that the event property is, or can be converted to a boolean. |
durationProperty |
string | No | The name of the event property that specifies the request duration (execution time). |
durationUnit |
"TimeSpan", "milliseconds", "seconds", "minutes" or "hours" | No | Specifies the type of data used by request duration property. If not set, it is assumed that request duration is expressed as a double value, representing milliseconds. |
responseCodeProperty |
string | No | The name of the event property that specifies response code associated with the request. A response code describes in more detail the outcome of the request. It is expected that the event property is, or can be converted to a string. |
Dependency metadata type
Dependency event represents the act of calling a service that your service depends on. It has the following properties:
Field | Values/Types | Required | Description |
---|---|---|---|
metadata |
"dependency" | Yes | Indicates dependency metadata definition; must be "dependency". |
isSuccessProperty |
string | No | The name of the event property that specifies whether the request ended successfully. It is expected that the event property is, or can be converted to a boolean. |
durationProperty |
string | No | The name of the event property that specifies the request duration (execution time). |
durationUnit |
"TimeSpan", "milliseconds", "seconds", "minutes" or "hours" | No | Specifies the type of data used by request duration property. If not set, it is assumed that request duration is expressed as a double value, representing milliseconds. |
responseCodeProperty |
string | No | The name of the event property that specifies response code associated with the request. A response code describes in more detail the outcome of the request. It is expected that the event property is, or can be converted to a string. |
targetProperty |
string | Yes | The name of the event property that specifies the target of the call, i.e. the identifier of the service that your service depends on. |
dependencyType |
string | No | An optional, user-defined designation of the dependency type. For example, it could be "SQL", "cache", "customer_data_service" or similar. |
Exception metadata type
Exception event corresponds to an occurrence of an unexpected exception. Usually a small amount of exceptions is continuously being thrown, caught and handled by a .NET process, this is normal and should not raise a concern. On the other hand, if an exception is unhandled, or unexpected, it needs to be logged and examined. This metadata is meant to cover the second case. It has the following properties:
Field | Values/Types | Required | Description |
---|---|---|---|
metadata |
"exception" | Yes | Indicates exception metadata definition; must be "exception". |
exceptionProperty |
System.Exception | Yes | The name of the event property that carries the (unexpected) exception object. Note that (for maximum information fidelity) the expected type of the event property is System.Exception . In other words, the actual exception is expected to be part of event data, and not just a stringified version of it. |
Also see Application Insight Exception metadata type with EvenSource input issue
Every software component can generate errors or warnings the developer should be aware of. The EventFlow library is no exception. An EventFlow health reporter reports errors and warnings generated by any components in the EventFlow pipeline. In what format the report is presented depends on the implementation of the health reporter. The EventFlow library suite includes two health reporters: CsvHealthReporter and ServiceFabricHealthReporter.
The CsvHealthReporter is the default health reporter for EventFlow library and is used if the health reporter configuration section is omitted. Its configuration parameters are described below.
ServiceFabricHealthReporter is described in the Service Fabric support paragraph. It is designed to be used in the context of Service Fabric applications and does not need any configuration.
Nuget Package: Microsoft.Diagnostics.EventFlow.Core
This health reporter writes all errors, warnings, and informational traces generated from the pipeline into a CSV file. Here is an example showing all possible settings:
"healthReporter": {
"type": "CsvHealthReporter",
"logFileFolder": ".",
"logFilePrefix": "HealthReport",
"minReportLevel": "Warning",
"throttlingPeriodMsec": "1000",
"singleLogFileMaximumSizeInMBytes": "8192",
"logRetentionInDays": "30",
"ensureOutputCanBeSaved": "false"
}
Field | Values/Types | Required | Description |
---|---|---|---|
type |
"CsvHealthReporter" | Yes | Specifies the health reporter type. For this reporter, it must be "CsvHealthReporter". |
logFileFolder |
file path | No | Specifies a path for the CSV log file to be written. It can be an absolute path, or a relative path. If it's a relative path, then it's computed relative to the directory where the EventFlow core library is in. However, if it's an ASP.NET application, it's relative to the app_data folder. |
logFilePrefix |
file path | No | Specifies a prefix used for the CSV log file. CsvHealthReporter creates the log file name by combining this prefix with the date of when the file is generated. If the prefix is omitted, then a default prefix of "HealthReport" is used. |
minReportLevel |
Error, Warning, Message | No | Specifies the collection report level. Report traces with equal or higher severity than specified are collected. For example, if Warning is specified, then Error, and Warning traces are collected. Default is Error. |
throttlingPeriodMsec |
number of milliseconds | No | Specifies the throttling time period. This setting protects the health reporter from being overwhelmed, which can happen if a message is repeatedly generated due to an error in the pipeline. Default is 0, for no throttling. |
singleLogFileMaximumSizeInMBytes |
File size in MB/number | No | Specifies the size of the log file in MB before rotating happens. The default value is 8192 MB (8 GB). Once the size of log file exceeds the value, it will be renamed from fileName.csv to fileName_last.csv. Then logs will be written to a new fileName.csv. This setting prevents a single log file become too big. |
logRetentionInDays |
number of days for the logs files retain | No | Specifies how long log files will be retained. The default value is 30 days. Any log files created earlier than the specified number of days ago will be removed automatically. This prevents continuous generation of logs that might lead to storage exhaustion. |
ensureOutputCanBeSaved |
boolean | No | Specifies whether the health reporter is going to ensure the permission to write to the log folder. The default value is false . When set to true , it will prevent the pipeline creation when it can't write the log. Otherwise, it will ignore the error. |
CsvHealthReporter will try to open the log file for writing during initialization. If it can't, by default, a debug message will be output to the debugger viewer like Visual Studio Output window, etc. This can happen especially if a value for the log file path is not provided (default is used, which is application executables folder) and the application executables are residing on a read-only file system. Docker tools for Visual Studio use this configuration during debugging, so for containerized services the recommended practice is to specify the log file path explicitly.
The EventFlow configuration has settings allowing the application to adjust certain behaviors of the pipeline. These range from how many events the pipeline buffer, to the timeout the pipeline should use when waiting for an operation. If this section is omitted, the pipeline will use default settings. Here is an example of all the possible settings:
"settings": {
"pipelineBufferSize": "1000",
"maxEventBatchSize": "100",
"maxBatchDelayMsec": "500",
"maxConcurrency": "8",
"pipelineCompletionTimeoutMsec": "30000"
}
Field | Values/Types | Required | Description |
---|---|---|---|
pipelineBufferSize |
number | No | Specifies how many events the pipeline can buffer if the events cannot flow through the pipeline fast enough. This buffer protects loss of data in cases where there is a sudden burst of data. |
maxEventBatchSize |
number | No | Specifies the maximum number of events to be batched before the batch gets pushed through the pipeline to filters and outputs. The batch is pushed down when it reaches the maxEventBatchSize, or its oldest event has been in the batch for more than maxBatchDelayMsec milliseconds. |
maxBatchDelayMsec |
number of milliseconds | No | Specifies the maximum time that events are held in a batch before the batch gets pushed through the pipeline to filters and outputs. The batch is pushed down when it reaches the maxEventBatchSize, or its oldest event has been in the batch for more than maxBatchDelayMsec milliseconds. |
maxConcurrency |
number | No | Specifies the maximum number of threads that events can be processed. Each event will be processed by a single thread, by multiple threads can process different events simultaneously. |
pipelineCompletionTimeoutMsec |
number of milliseconds | No | Specifies the timeout to wait for the pipeline to shutdown and clean up. The shutdown process starts when the DiagnosePipeline object is disposed, which usually happens on application exit. |
Nuget Package: Microsoft.Diagnostics.EventFlow.ServiceFabric
This package contains two components that make it easier to include EventFlow in Service Fabric applications: the ServiceFabricDiagnosticPipelineFactory
and ServiceFabricHealthReporter
. ServiceFabricHealthReporter
is used automatically by ServiceFabricDiagnosticPipelineFactory
. It does not require any configuration and does not need to be listed in the pipeline configuration file.
The ServiceFabricDiagnosticPipelineFactory
is a replacement for the standard DiagnosticPipelineFactory
, one that uses Service Fabric configuration support to load pipeline configuration. The resulting pipeline reports any execution problems through the Service Fabric health subsystem. The factory exposes a static Create()
method that takes two parameters:
Parameter | Default Value | Description |
---|---|---|
healthEntityName |
(none) | The name of the health entity that will be used to report EventFlow pipeline health to Service Fabric. Usually it is set to a value that helps you identify the service using the pipeline, for example "MyApplication-MyService-DiagnosticsPipeline". |
configurationFileName |
"eventFlowConfig.json" | The name of the configuration file that contains pipeline configuration. The file is expected to be part of a (Service Fabric) service configuration package. |
configurationPackageName |
"Config" | The name of the Service Fabric configuration package that contains the pipeline configuration file. |
The recommended place to create the diagnostic pipeline is in the service Main()
method:
public static void Main(string[] args)
{
try
{
using (ManualResetEvent terminationEvent = new ManualResetEvent(initialState: false))
using (var diagnosticsPipeline = ServiceFabricDiagnosticPipelineFactory.CreatePipeline("MyApplication-MyService-DiagnosticsPipeline"))
{
Console.CancelKeyPress += (sender, eventArgs) => Shutdown(diagnosticsPipeline, terminationEvent);
AppDomain.CurrentDomain.UnhandledException += (sender, unhandledExceptionArgs) =>
{
ServiceEventSource.Current.UnhandledException(unhandledExceptionArgs.ExceptionObject?.ToString() ?? "(no exception information)");
Shutdown(diagnosticsPipeline, terminationEvent);
};
ServiceRuntime.RegisterServiceAsync("MyServiceType", ctx => new MyService(ctx)).Wait();
ServiceEventSource.Current.ServiceTypeRegistered(Process.GetCurrentProcess().Id, typeof(MyService).Name);
terminationEvent.WaitOne();
}
}
catch (Exception e)
{
ServiceEventSource.Current.ServiceHostInitializationFailed(e.ToString());
throw;
}
}
private static void Shutdown(IDisposable disposable, ManualResetEvent terminationEvent)
{
try
{
disposable.Dispose();
}
finally
{
terminationEvent.Set();
}
}
The purpose of handling CancelKeyPress
and UnhandledException
events (the latter for full .NET Framework only) is to ensure that the EventFlow pipeline is cleanly disposed. This is important for pipeline elements that rely on system-level resources. For example, Event Tracing for Windows (ETW) input creates a system-wide ETW listening session, which must be disposed when the EventFlow pipeline is shut down. Ctrl-C signal is the standard way the Service Fabric runtime uses to notify service processes that they need to perform cleanup and exit. By default the process has 30 seconds to react.
The UnhandledException event method is a very simple addition to the standard ServiceEventSource:
[Event(UnhandledExceptionEventId, Level = EventLevel.Error, Message = "An unhandled exception has occurred")]
public void UnhandledException(string exception)
{
WriteEvent(UnhandledExceptionEventId, exception);
}
Version 1.0.1 of the EventFlow Service Fabric NuGet package introduced the ability to refer to Service Fabric settings from EventFlow configuration using special syntax for values:
servicefabric:/<section-name>/<setting-name>
where <section-name>
is the name of Service Fabric configuration section and <setting-name>
is the name of the Service Fabric configuration setting that is providing the value for some EventFlow setting. For example:
"basicAuthenticationUserPassword": "servicefabric:/DiagnosticPipelineParameters/ElasticSearchUserPassword"
The EventFlow configuration entry above means "take the ElasticSearchUserPassword setting from DiagnosticPipelineParameters section of the Service Fabric service configuration and use its value as the value for the EventFlow basicAuthenticationUserPassword setting". As with other Service Fabric settings, the values can also be overriden by Service Fabric application parameters. For more information on this see Manage application parameters for multiple environments topic in Service Fabric documentation.
Version 1.1.2 added support for resolving paths to other configuration files that are part of the default service configuration package. The syntax is:
servicefabricfile:/<configuration-file-name>
At run time this value will be substituted with a full path to the configuration file with the given name. This is especially useful if an EventFlow pipeline element wraps an existing library that has its own configuration file format (as is the case with Application Insights, for example).
The logical expression allows you to filter events based on the event properties. For example, you can have an expression like "ProviderName == MyEventProvider && EventId == 3", where you specify the event property name on the left side and the value to compare on the right side. If the value on the right side contains special characters, you can enclose it in double quotes.
Here are the supported operators:
Comparison: ==
, !=
, <
, >
, <=
, >=
Bitwise Equality: &==
(true if bit mask is set, i.e., (lhsValue & rhsValue) == rhsValue, this is useful when filter on properties like Keywords)
Regular Expression: ~=
(provide a regular expression pattern on the right)
Logical: &&
, ||
, !
(the precedence is !
> &&
> ||
)
Grouping: (expression)
(grouping can be used to change the evaluation order of expressions with logical operators)
If you don't want to put sensitive information in the EventFlow configuration file, you can store the information at a secured place and pass it to the configuration at run time. Here is the sample code:
string configFilePath = @".\eventFlowConfig.json";
IConfiguration config = new ConfigurationBuilder().AddJsonFile(configFilePath).Build();
IConfiguration eventHubOutput = config.GetSection("outputs").GetChildren().FirstOrDefault(c => c["type"] == "EventHub");
if (eventHubOutput != null)
{
string eventHubConnectionString = GetEventHubConnectionStringFromSecuredPlace();
eventHubOutput["connectionString"] = eventHubConnectionString;
}
using (DiagnosticPipeline pipeline = DiagnosticPipelineFactory.CreatePipeline(config))
{
// ...
}
Every pipeline element type (input, filter, output and health reporter) is a point of extensibility, that is, custom elements of these types can be used inside the pipeline. Contracts for all EventFlow element types are provided by EventFlow.Core assembly (except from the input type, see below).
EventFlow pipelines operate on EventData objects. Each EventData object represents a single telemetry record (event) and has the following public properties and methods:
Name | Type | Description |
---|---|---|
Timestamp |
DateTimeOffset |
Indicates time when the event was created. |
ProviderName |
string |
Identifies the source of the event. |
Level |
LogLevel (enumeration) |
Provides basic severity assesment of the event: is it a critical error, regular error, a warning, etc. |
Keywords |
long |
Provides means to efficiently classify events. The field is supposed to be interpreted as a set of bits (64 bits available). The meaning of each bit is specific to the event provider; EventFlow does not interpret them in any way. |
Payload |
IDictionary<string, object> |
Stores event properties |
TryGetMetadata(string kind, out IReadOnlyCollection<EventMetadata> metadata) |
bool | Retrieves metadata of a given kind (if any) from the event. Returns true if metadata of given kind was found, otherwise false. |
SetMetadata(EventMetatada metadata) |
void | Adds (attaches) a new piece of metadata to the event. |
GetValueFromPayload<T>(string name, ProcessPayload<T> handler) |
bool | Retrieves a payload value from the payload (set of event properties). Although the payload can be accessed directly via Payload property, this method is useful because it will check whether the property exists and perform basic type conversion as necessary. |
AddPayloadProperty(string key, object value, IHealthReporter healthReporter, string context) |
void | Adds a new payload property to the event, performing property name disambiguation as necessary. The healthReporter and context parameters are used to produce a warning in case the name disambiguation is necessary (had to be changed because the event already had a property with name equal to key parameter). |
DeepClone() |
EventData |
Performs a deep clone operation on the EventData. The resulting copy is independent from the original and either can be modified without affecting the other (e.g. properties or metadata can be added or removed). The only exception is that payload values are not cloned (and thus are shared between the copies). |
Note that EventData type is not thread-safe. Don't try to use it concurrently from multiple threads.
Inputs are producing new events (EventData
instances). Anything that implements IObservable<EventData>
can be used as an input for EventFlow. IObservable<T>
is a standard .NET interface in the System namespace.
Filters have a dual role: they modify events (e.g. by decorating them with metadata) and instruct EventFlow to keep or discard the event. They are expected to implement the IFilter
interface:
public enum FilterResult
{
KeepEvent = 0,
DiscardEvent = 1
}
public interface IFilter
{
FilterResult Evaluate(EventData eventData);
}
Output's purpose is to send data to its final destination. It is expected to implement IOutput
interface:
public interface IOutput
{
Task SendEventsAsync(IReadOnlyCollection<EventData> events, long transmissionSequenceNumber, CancellationToken cancellationToken);
}
The output receives a batch of events, along with transmission sequence number and a cancellation token. The transmission sequence number can be treated as an identifier for the SendEventsAsync()
method invocation; it is guaranteed to be unique for each invocation, but there is no guarantee that there will be no "gaps", nor that it will be strictly increasing. The cancellation token should be used to cancel long-running operations if necessary; typically it is passed as a parameter to asynchronous i/o operations.
Every EventFlow pipeline can be created imperatively, i.e. in the program code. The structure of every pipeline is reflected in the constructor of the DiagnosticPipeline
class and is as follows:
- One or more inputs produce events.
- A set of common filters (also known as 'global' filters) does initial filtering.
- Then the events are sent to one or more outputs (by cloning them as necessary). Each output can have its own set of filters. A combination of an output and a set of filters associated with that output is called a 'sink'.
EventFlow employs the following policies with regards to concurrency:
- Inputs are free to call OnNext() on associated observers using any thread.
- EventFlow will ensure that only one filter at a time is evaluating any given EventData object. That said, the same filter can be invoked concurrently for different events.
- Outputs will invoked concurrently for different batches of data.
The simplest way to use custom EventFlow elements is to create a pipeline imperatively, in code. You just need to create a read-only collections of the inputs, global filters and sinks and pass them to DiagnosticPipeline
constructor. Custom and standard elements can be combined freely; each of the standard pipeline elements has a public constructor and associated public configuration class and can be created imperatively.
To create an EventFlow pipeline with custom elements from configuration each custom element needs a factory. The factory is an object implementing IPipelineItemFactory<TPipelineItem>
and is expected to have a parameter-less constructor.
The factory's CreateItem(IConfiguration configuration, IHealthReporter healthReporter)
method will receive a configuration fragment that represents the pipeline item being created. The health reporter is available to report issues in case configuration is corrupt or some other problem occurrs during item creation. The health reporter can also be passed to and used by the created pipeline item.
For EventFlow to know about the item factory it must appear in the 'extensions' section of the configuration file. Each extension record has 3 properties:
- "category" identifies extension type. Currently types recognized by DiagnosticPipelineFactory are inputFactory, filterFactory, outputFactory or healthReporter.
- "type" is the tag that identifies the extension in other parts of the configuration document(s). It is totally up to the user of an extension what she uses here.
- "qualifiedTypeName" is the string that allows DiagnosticPipelineFactory to instantiate the extension factory
Here is a very simple example that illustrates how to create a custom output and instantiate it from a configuration file.
namespace EventFlowCustomOutput
{
class Program
{
static void Main(string[] args)
{
using (DiagnosticPipelineFactory.CreatePipeline("eventFlowConfig.json"))
{
Trace.TraceError("Hello, world!");
Thread.Sleep(1000);
}
}
}
class CustomOutput : IOutput
{
public Task SendEventsAsync(IReadOnlyCollection<EventData> events, long transmissionSequenceNumber, CancellationToken cancellationToken)
{
foreach(var e in events)
{
Console.WriteLine($"CustomOutput: event says '{e.Payload["Message"]?.ToString() ?? "nothing"}'");
}
return Task.CompletedTask;
}
}
class CustomOutputFactory : IPipelineItemFactory<CustomOutput>
{
public CustomOutput CreateItem(IConfiguration configuration, IHealthReporter healthReporter)
{
return new CustomOutput();
}
}
}
(content of eventFlowConfig.json)
{
"inputs": [
{
"type": "Trace"
}
],
"filters": [
],
"outputs": [
{
"type": "CustomOutput"
}
],
"schemaVersion": "2016-08-11",
"extensions": [
{
"category": "outputFactory",
"type": "CustomOutput",
"qualifiedTypeName": "EventFlowCustomOutput.CustomOutputFactory, EventFlowCustomOutput"
}
]
}
EventFlow supports full .NET Framework (.NET 4.5 series and 4.6 series) and .NET Core, but not all inputs and outputs are supported on all platforms. The following table lists platform support for standard inputs and outputs.
Input Name | .NET 4.5.1 | .NET 4.6 | .NET Core |
---|---|---|---|
Inputs | |||
System.Diagnostics.Trace | Yes | Yes | Yes |
EventSource | No | Yes | Yes |
PerformanceCounter | Yes | Yes | No |
Serilog | Yes | Yes | Yes |
Microsoft.Extensions.Logging | Yes | Yes | Yes |
ETW (Event Tracing for Windows) | Yes | Yes | No |
Application Insights input | Yes | Yes | Yes |
Outputs | |||
StdOutput (console output) | Yes | Yes | Yes |
Application Insights | Yes | Yes | Yes |
Azure EventHub | Yes | Yes | Yes |
Elasticsearch | Yes | Yes | Yes |
OMS (Operations Management Suite) | Yes | Yes | Yes |
Refer to contribution guide.
Refer to Code of Conduct guide.