selimarikan/adriad2

Automatically exported from code.google.com/p/adriad2

adriad2's Issues

Order of accounts/mules

It would be helpful if the order of accounts and mules could be arranged in any 
fashian, e.g. via drag and drop. Alternatively they should be sorted 
alphabetically.

Original issue reported on code.google.com by [email protected] on 16 Jul 2011 at 7:09

Backup data function - adding backup of ini files

backup data only backups char's but not ini files

Original issue reported on code.google.com by [email protected] on 1 Sep 2010 at 8:37

OCR returned nothing of value

What steps will reproduce the problem?
1. Trying to identify an item.
2.
3.

What is the expected output? What do you see instead?
Expect to add to list.
OCR returned nothing of value

What version of the product are you using? On what operating system?
4.4.291
Windows 7 64bit

Please provide any additional information below.

Original issue reported on code.google.com by [email protected] on 15 Jun 2011 at 11:49

.exe doesn't run

What steps will reproduce the problem?
1.double-click Adria.exe
2.
3.

What is the expected output? What do you see instead?
It is supposed to have a program window pop out, but nothing hapens

What version of the product are you using? On what operating system?
adria 5, I am using windows 7

Please provide any additional information below.

Original issue reported on code.google.com by [email protected] on 27 Nov 2012 at 5:53

Unidentified Set Items returned as Unknown White item

What steps will reproduce the problem?
1. Grab a code for an Unidentified Set Item.  Items I used that returned this 
setting was an UNID Mithril Coil and an UNID Corona.

What is the expected output? What do you see instead?
Expected output should be an Unidentified Set item of the same name.  Instead, 
output is generated as a "White" item in an "Unknown" category with no 
statistics.

What version of the product are you using? On what operating system?
Adria 4.3.0, Windows XP.

Please provide any additional information below.
Attached screenshot

Original issue reported on code.google.com by [email protected] on 11 Dec 2010 at 5:19

Attachments:

• adriasetitems.PNG

Make metadata info for char easier to spot

- You can mark an character as full. However this is only visible as you edit 
the character. Is it possible to display this in the character folder listing. 
Eg if you are your character is named "Example" and you have marked it as full, 
then in the character folder listing it would say: "Example (full)"
- Same story for metadata. Say the same character has meta data "mule char" 
then it would display in the character folder list: "Example (full - mule 
char)" or you guys think it's to complicated becuase of the length, you could 
also make the metadata visible as mouse over text

Original issue reported on code.google.com by [email protected] on 1 Sep 2010 at 7:55

Make metadata info for item easier to spot

- If you mark an item as not for trade, this is only visible when you edit the 
item, can this be made visible when you mouse over the item?
- Same for metadata

Original issue reported on code.google.com by [email protected] on 1 Sep 2010 at 7:57

Using not for trade in tradelist generator

- If you mark an item not for trade, i'd expect when creating a tradelist there 
would be an option in edit node, section reduce text "no items marked as "NFT" 
and the default value checked. However I was not able to find this.

Original issue reported on code.google.com by [email protected] on 1 Sep 2010 at 8:36

Adria stops scanning after 6 items.

What steps will reproduce the problem?
1.Scan any 6 items.
2.
3.

What is the expected output? What do you see instead?
Nothing happens after 6 items. The F# keys no longer respond, but the 'main' 
window is still working.


What version of the product are you using? On what operating system?
4.3.0. Windows 7.

Please provide any additional information below.
The program starts and works perfectly up to scanning the sixth item. Then the 
'in-game' window becomes unresponsive. I've tried stopping/restarting the 
engine from the main window (the mini window does close and open) but remains 
unresponsive. I can still use the main window (still new, learning all the 
features) to edit and sort etc. and back-up. If I close down the program and 
restart everything works fine until I scan the 6th item. This problem happens 
even across different characters, I did 2 from a character, then made a new and 
was only able to scan/load in 4 items into the new one.

Original issue reported on code.google.com by [email protected] on 22 Sep 2010 at 11:28

even more OCR functionality ...

Add:
   1. Item Multiadd => add runes/gems fraom their pictures
   2. Screenshot => cropped & named pictures
   3. char add => scan char name from LCS
   4. char multiadd => scan char names from account screen
   5. remake of static getletter => less scan errors "out of the box"
   6. calibration wizard for dynamic getletter => less work getting its DB complete

Original issue reported on code.google.com by [email protected] on 1 Sep 2010 at 3:38

summary column in the main grid

Add an column that the user can turn on and of that uses tradelist style 
printout of item mods to give a summary of the item stats.

Original issue reported on code.google.com by [email protected] on 1 Sep 2010 at 3:36

Searching metadata

 is there an easy way to search for items in the metadata, using the search function I would like te be able to search for all items marked as not for sale or all items with this not checked, or in the case I use metadata of items to add things like crap jewel, then it would be nice to search for all jewels with "crap jewel" in metadata

Original issue reported on code.google.com by [email protected] on 1 Sep 2010 at 8:33

Adria doesn't start

What steps will reproduce the problem?
1.Double-Click on Adria.exe

What is the expected output? What do you see instead?
After clicking on "Adria.exe" the program should start and the main window 
should open (i hope so after all). When i do so, the information that the 
"CodejockSoftware" trial is going to expire and then a windows window opens 
with the message (caution,free translation here due to i don't know if it's in 
english windows 7 version the same...): "Adria doesn't work anymore... a 
solution for this problem is beeing searched for" (in german the text is: 
"Adria funktioniert nicht mehr... Es wird nach einer Lösung für das Problem 
gesucht"
after a few seconds where windows is searching for a solution another window 
appears: "Adria doesn't work anymore... The program isn't working well because 
of a problem. The program is beeing terminated and as soon as there's a 
solution well contact you" (in german:"Adria funktioniert nicht mehr... Das 
Programm wird aufgrund eines Problems nicht richtig ausgeführt. Das Programm 
wird geschlossen und Sie werden benachrichtigt, wenn eine Lösung verfügbar 
ist."

What version of the product are you using? On what operating system?
i'm using Adria 4.3 on Windows 7 x64

Please provide any additional information below.

Original issue reported on code.google.com by [email protected] on 12 Sep 2010 at 12:51

test for Enhancement issue

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?


Please provide any additional information below.

Original issue reported on code.google.com by [email protected] on 1 Sep 2010 at 9:39

custom mod order in tradelists

[QUOTE=tkn;7652694]Hi, I have a quick question:
How would you change the placement of the Defense/Requirements,etc to the end 
of the line rather than the beginning?

for example, say it said

Rare Boots (Defense: 4, Required Strength: 30, Strength Req:29, 30 FRW, 35 CR, 
35 LR)

would it be possible to change it to

Rare Boots (30 FRW, 35 CR, 35 LR / Defense: 4, Level Req :29, Strength Req: 
30)?[/quote]

Original issue reported on code.google.com by [email protected] on 1 Sep 2010 at 2:30

no insert key on some keyboards, insert don't respond

What steps will reproduce the problem?
1. I open Adria and Diablo 2 windows
2. I press F12 then F8 and enter to add ACC name
3. I can't use insert to add character name.

PS: Tried to solve this by mapping Insert to other key with "SharpKey" 
registtry trick but it didn't help. I also tried to use common shortcuts like 
NumLock (Off)>numpad 0, It also didn't work for me.

What version of the product are you using? On what operating system?
-Windows7 Ultimate

Please provide any additional information below.

Original issue reported on code.google.com by [email protected] on 13 Mar 2012 at 10:43

Scroll through info tab

What steps will reproduce the problem?
1. press f11 to get to info dialog
2. navigate to cubing 
3. try to read full topic on cubing

What is the expected output? What do you see instead?
When i hover my move over the dialog the whole dialog pops to the other side of 
the window

What version of the product are you using? On what operating system?
win 7 x64, newest version 5

Original issue reported on code.google.com by [email protected] on 12 Jan 2015 at 8:37

RICHTX32.ocx

What steps will reproduce the problem?
1.Download Adria 4.3.0 - installer
2.Begin to install
3.Presto the Error box pops up

What is the expected output?
The expected output would be the software completing the installation.

What do you see instead?
About 10% of the  installation installed.

What version of the product are you using? On what operating system?
Adria 4.3.0
I am using Windows 7 Ultimate 64x

Please provide any additional information below.
I have tried to install countless times
After restarting and anything I could think of
I even tried to delete or rename the richtx32 file in the system32 folder but 
there was no such file.
So I dont really understand why it is not installing.

Also if I press ignore and finish the install the program will not load.
It finishes the reset of the install and then you hear the error tone or sound.
When you try to start the program all you hear is the error sound

Original issue reported on code.google.com by [email protected] on 6 Sep 2010 at 1:44

Attachments:

• [adria no install.PNG](https://storage.googleapis.com/google-code-attachments/adriad2/issue-12/comment-0/adria no install.PNG)

Serious Problems. (included screenshot)

What steps will reproduce the problem?
1.When I Push F8 while locate mouse cursor over item's stat box

2.The item's recoding failed.(sort as Class: n/a and there is no item's stat, 
picture, name or any other word. just display such as metadata - not for trade 
in yellow color.)

3.To avoid this problem, I always have to locate item's stat box to record 
above item's shape block on inventory/stash/inside cube.

But there are another problem that there are so many item(Grief, Doom, Heart of 
the oak, Pride, Tomb Reaver etc) that cannot be locate stat box above item's 
shape block.
If I locate item to record bottom side, The stat box cannot be rise so mouse 
cursor is located above stat box.
Then Problem happens. (Therefore I have to type all of item's stats myself 
-_-;;;) 

and sometimes adria's small windows in diablo ii not respone.
to solve this i have to alt+tap then click repair buttone.

What is the expected output? What do you see instead?
stated above.

What version of the product are you using? On what operating system?
lastes version(5.0.0 beta)

SuiteProEval.ActiveX.v13.0.0.exe - Codejock Xtreme Suite Professional Edition - 
Trial

windows 7 ultimate x64 sp1

diablo 2 1.13d


Please provide any additional information below.
hmm, I also tried older versions.
But not helps...
older versions is freezes too many.

When I see Adria's newer version?

Original issue reported on code.google.com by [email protected] on 20 May 2013 at 12:10

Attachments:

• bugs.png

Minor bug displaying "not for trade" - the list is not refreshed

What steps will reproduce the problem?
1. select a character so the items of the characters are displayed in the item 
list window
2. dubbel klik an item you want to mark as "not for trade"
3. in the editor window the item is displayed
4. mark the item as "not for trade"
5. right clik on the editor window and choose for "save"
6. Now dubbel click on the item again -> the item is not marked as "not for 
trade". In fact it is mark "not for trade" however, but the item is not 
refreshed, because if you deselect the char and select it again, dubbelclick 
the item...it is marked as "not for trade" 

What is the expected output? What do you see instead?
If mark an item as "not for trade" it should display that if you reselect the 
item, without reselecting the characters items

What version of the product are you using? On what operating system?
4.3.0

Please provide any additional information below.

Original issue reported on code.google.com by [email protected] on 3 Sep 2010 at 12:29

Minor enhancement - Mark multiple items as not for trade

Is it possible to add the functionality of selecting multiple items in the item 
window and mark them as not for trade (eg as an option in the right click menu)

Original issue reported on code.google.com by [email protected] on 3 Sep 2010 at 1:05

Edit metadata of multiple characters

Well the ladder reset is commin soon. Wouldn't it be nice to change all you 
ladder characters in NL characters ?

Original issue reported on code.google.com by [email protected] on 16 Sep 2010 at 6:54