Indexing TEM diffraction pattern with Spot ID V2: Crystal info loading problem

[seto77]

Indexing TEM diffraction pattern with Spot ID V2: Crystal info loading problem

[seto77]

Hi Selda-san.

Thank you for using my software. Also, I'm sorry that it's difficult to understand how to use it.
In the latest version (v.4.829), after pressing the "Identify Spots" button, a message will be displayed to indicate whether it was successful or not.

The simplest way to use Spot ID v2 is as follows.

1. Select the desired crystal in the main window, and call "Spot ID v2"
2. Load the image.
3. Click the "Detect & fit spots" button.
4. Press the "Identify Spots" button.
   After loading the image, make sure that the camera length and pixel size are correct. If these are not correct, of course the indexing will not work.

I have attached a diffraction image file of SrTiO3 for your reference. This file is in DM3 format and when loaded, the camera length and pixel size will be automatically set. You can try to use this file to see if the indexing works.
SrTiO3.zip

If no matter how you try, it doesn't work, just upload your image here ( or email me).

seto