- This device provides customers with an ultra-low cost LoRa node device solution.With a unique debug interface
- This device has not started selling and is in the debugging phase.Will be available soon.
- This library is transplanted form https://github.com/Lora-net/LoRaMac-node
- Only support the STM32F030C8Tx + LoRa series products made by HelTec Automation(TM), and a LoRa gateway is must needed.
- You may need change some definition in "Commissioning.h" ,"main.c"...
- Use RTC and deep sleep mode supported, only few millisecond wake up in a cycle.
The STM32F030_LoRaWAN library provides a fairly complete LoRaWAN Class A and Class C implementation, supporting the EU-433 CN-470 EU-868 and US-915 bands. Only a limited number of features was tested using this port on Heltec hardware, so be careful when using any of the untested features.
The following functions included:
- LoRaWAN protocol V1.0.2 Class A and Class C;
- Use external RTC(32.768KHz);
- STM32F030C8Tx + LoRa boards made by Heltec Automation(TM) can use this library;
- Support deepsleep and stop mode.
- Uniquely designed debug interface for easy maintenance.
-
Gateway: HT-M02 GateWay¡¢HT-M01 Mini LoRa Gateway + Raspberry Pi Zero W
-
Node: STM32_F030_LoRa
-
LoRaServer: Aliyun ECS + Ubuntu 16.04 + loraserver.io
-
MDK-ARM V5.
working band status EU_433 not test CN_470_510 work well EU_863_870 not test US_902_928 not test