signatum/sxt

Lack's Stock eXTension

sxt's Issues

NullReferenceException with SXT Gridfins and FAR

The NullReferenceException shows up when I put the SXT gridfins on any rocket in the VAB and make a FAR Data + Stability Derivatives Analysis.

NullReferenceException: Object reference not set to an instance of an object
at ferram4.FARControllableSurface.get_MovableSection () [0x00000] in :0

at ferram4.FARControllableSurface.DeflectionAnimation () [0x00000] in :0

at ferram4.FARControllableSurface.SetControlStateEditor (Vector3 CoM, Vector3 velocityVec, Single pitch, Single yaw, Single roll, Int32 flap, Boolean brake) [0x00000] in :0

at FerramAerospaceResearch.FARGUI.FAREditorGUI.Simulation.InstantConditionSim.GetClCdCmSteady (FerramAerospaceResearch.FARGUI.FAREditorGUI.Simulation.InstantConditionSimInput input, FerramAerospaceResearch.FARGUI.FAREditorGUI.Simulation.InstantConditionSimOutput& output, Boolean clear, Boolean reset_stall) [0x00000] in :0

at FerramAerospaceResearch.FARGUI.FAREditorGUI.Simulation.StabilityDerivCalculator.CalculateStabilityDerivs (Double u0, Double q, Double machNumber, Double alpha, Double beta, Double phi, Int32 flapSetting, Boolean spoilers, .CelestialBody body, Double alt) [0x00000] in :0

at FerramAerospaceResearch.FARGUI.FAREditorGUI.StabilityDerivGUI.Display () [0x00000] in :0

at FerramAerospaceResearch.FARGUI.FAREditorGUI.EditorGUI.OverallSelectionGUI (Int32 windowId) [0x00000] in :0

at UnityEngine.GUILayout+LayoutedWindow.DoWindow (Int32 windowID) [0x00000] in :0

at UnityEngine.GUI.CallWindowDelegate (UnityEngine.WindowFunction func, Int32 id, UnityEngine.GUISkin _skin, Int32 forceRect, Single width, Single height, UnityEngine.GUIStyle style) [0x00000] in :0

(Filename: Line: -1)

part SXTn1GridFin

Full Log:
https://www.dropbox.com/s/ulx6hx9rrqtq47x/SXT_FAR_Exp.zip?dl=0

ELEVON MK3

not sure if the problem only exist with FAR, but under FAR, the control surface of elevon mk3 is quite limited, only the outside part. hope for fix

CKAN and building release zips

CKAN does not yet support grabbing a 'source' zip from a github release. Thus I have taken the liberty of building a 22.3 release zip so CKAN will index (it hasn't indexed in a while). The alternative is switching CKAN back to grabbing from the SXT entry on KerbalStuff, so if you plan to keep that updated (I noticed it was on 22.2 not 22.3) we should swap the CKAN metadata back to pulling from KerbalStuff instead? (Unless you do want to upload release zips to git, or @pjf and the gang add support for source zips.)

CKAN Error

Whenever I try to update my STX to v25.1, I get this message.

Failed to download "https://github.com/Signatum/SXT/releases/download/v25.1/SXT25pre.zip" - error: The request was aborted: The connection was closed unexpectedly.

Do you know what could be causing this?

Thanks

Nozzle-extension AJ10

If you do decide to make one, can you name it SXTAJ10Mid ? Then I can seamlessly remove the clone I'm currently using. :)

'SXT/Parts/Utility/floats/airboatfrontsmall' as model does not exist

PartLoader: Compiling Part 'SXT/Parts/Utility/floats/partSmall/SXTfloatFrontSmall'
PartCompiler: Cannot clone model 'SXT/Parts/Utility/floats/airboatfrontsmall' as model does not exist
PartCompiler: Model was not compiled correctly
PartCompiler: Cannot compile model

1.1 Compatibility

Dunno if you've heard but the prerelease for 1.1 is out and SXT isn't playing all that nicely.

how you gonna have an f-35 rotating nozzle engine without a lifter fan?

like come on, why you gotta do me like that my guy

'SXT/Parts/Utility/floats/airboatmidsmall' as model does not exist

PartLoader: Compiling Part 'SXT/Parts/Utility/floats/partMidSmall/SXTfloatMidSmall'
PartCompiler: Cannot clone model 'SXT/Parts/Utility/floats/airboatmidsmall' as model does not exist
PartCompiler: Model was not compiled correctly
PartCompiler: Cannot compile model
PartCompiler: Cannot compile part

KASModuleGrab

I think all the KASModuleGrab stuff can be scrapped and ModuleKISItem used instead.

http://forum.kerbalspaceprogram.com/threads/113111-1-0-2-Kerbal-Inventory-System-%28KIS%29-1-1-5/page85

Wheel Parts not behaving properly

Trying to use a basic TG-T1 and TG-T2 wheel block to drive around the KSC however when the wheels touch the runway the craft explosively disassembles. Other wheels seem to behave fine, the only issues are with the TG-T2 wheel well that I've tested. I haven't tested other wheel wells.