sikaxn/esc-pos-customer-display-clock

Turn 8 seg (LED8) customer display into a clock

将POS 8位数字LED顾客显示屏作为时钟

You need a ESC/POS compliant customer display unit. 你需要一个支持ESC/POS的顾客显示屏

Example compatable display unit 支持ESC/POS的顾客显示屏的例子

https://www.ocominc.com/cn/products/Double-Line-Pos-LED-Customer-Display-LED8A.html https://detail.tmall.com/item.htm?spm=a21wu.10013406.0.0.6bec6647XC0ywV&id=584671093507 https://item.taobao.com/item.htm?spm=a21wu.10013406.0.0.6bec6647XC0ywV&id=15241673778 https://www.yoycart.com/Product/35302543438/ https://guide.alibaba.com/t-shop/aibo-led8-customer-display-pole-display-pos-customer-display-led-customer-display-pole-display_76523365.html https://www.alibaba.com/product-detail/LED8-Customer-Display-POS-Pole-Display_1852639944.html https://www.chinaglobalmall.com/products/565701019398 These links are not affiliated with me and may change overtime. 这些链接与我没有推广关系，并可能随着时间而改变。

Setup environment

配置环境

You need to install python and pyserial library in order to get this work. python和pyserial是本程序的依赖，需要被安装。

After install, you needs to edit serial port assignment on timeupdate.py to the matching one on the stack display connected to. timeupdate.py中的串口需要修改为顾客显示屏连接的串口。

Setup startup (windows)

配置开机启动(windows)

Copy timeupdate.py into C drive, than throw stkclock.bat into startup folder (by running shell:startup on cmd or run you can open startup folder). Stack clock will come on when startup. 将timeupdate.py拷贝到C盘根目录，然后将stkclock.bat放入startup文件夹（通过在CMD里运行shell:startup可以打开这个文件夹），时钟将开机启动，