Play music with video samples. Realize live montages and generative installations. Choose sounds and vidéos and build interactions between
- Two audio/video tracks
- Sound analyse modules,
- Time stresh modules
- Synthetizers
- Step Sequencers
Two Step sequencers generating number sequence according to
- A number sequence of time
- A number sequence of itération
- A number sequence of progressivity
- A number sequence to be added or subtract
Apply the datas to:
- The position of the loop (4)
- The Pitch and the speed simultaneously (5)
- The speed only (5) to the pitch only (6)
- Synthetizers (7)
- Play all
$
of time (all$
of Step sequencerT) at each value of the general Step Sequencer (top line) ... allT $ / G $ - If it is not triggered = Play a $ of the Step sequencerT
at every
$
of the general sequencer Step ... T $ / G $
- Change steps on the step sequencer (s) in accordance with a fixed $ of time (1000) by default).
-
- Column still on the right: go to the value gradually (1000) by default)
- Divides time by the $ from Step Sequencer IT ... T $% IT
Receive the time of Step sequencer B
On/off
Step forward
Reverse steps off and steps on
Send a step on two opposite values
Move linearly on the sequence.
- One step all 6.25$ (100%16 = 6.25)
- if the tempo = loop lenght of the sequence%10
Turn this step mute
Choose position(s) to the starting point of the loop
- Add value to this position(s)
- Move the postion(s) along the whole sequence
- Apply enveloppe to sound track and opacity to video layer
Set the position of the playhead where to start the playback loop
raw data A or B
Make a loop on the fly and change position with Step sequencers
Call back the loop made in [A@]*
or with the [@A] mode go back where you were
at your last [@re]
Press on, press off (midi mod)
Lock selected source (midi mod)
If you choose to send files triggered by A or B or randomly with BB or BB1 the sample sent will be played at its beginning
Auto-receive On/off step and send enveloppe to the sound selected.
On/off step
send enveloppe to the sound selected
Send on/off step and set enveloppe from sources selected in s&p, speed, or pitch
Trigger the Step sequencer [A] or [B] as selected in s&p, speed, or pitch
- Speed and pitch (50 = 0= stop, 75= go forward , 25= go back)
- Speed only (50 = 0= stop, 75= go forward , 25= go back)
- Pitch only (0 = default)
Left ’s 2 columns
- select data source
Back to default $ after selection released
Go back to default $
set value
Choose data source
Right’s 2 columns
- Module data from the left ’s 2 columns
choose between 44100/88200 hz
Go back to default $ slider: set modulation value
Choose data source
Advance your number sequence, pattern, over the entire sample
Make the pattern you are making with Stepseq A or B sliding along the loop lenght more a less rapidly.
- Select entry point in the sample
- Select exit point
- Select strecthing value
Analyse silences and attacks in the audio signal of sampler or synthetizer
- Send the values as
Select a source
track AV left
upper synthetiser in purewave-synth
Mode scratch suite de valeurs opposées 0-100, 25-75 etc Sensibility Progressivity
Mode steps numbers sequence number of step$ 1 to 5
Select audio and vidéo loop
-
Call bank or single audio and vidéo files.
-
Data bank video
-
Data bank AV
-
Data bank audio
-
Link A&V selection
-
Select the file number..
-
Open browser
-
Select the file with A or B
-
One random selection
-
One random selection under the speed of Step sequencer BB or BB1
-
clear Drop down menu
-
Open browser
-
Drop down menu
Set video specifications
-
dimension, frame rate, incrustations and image modulations
-
Threshold: Turn pixel transparent according to the color
-
Change height and width
-
Change only width
-
Change only height
-
Change ratio height/width
-
Get dimension of the video sample
-
Change XYZ
-
Contrast
-
Saturation
-
Motion blur
On/off Receive On/off Invert color Audio control opacity
- Alors tu fais le malin!?
- C'est dur? Tu veux dire duRE!?
- D'écrire
- Comme çà ?
- C'est pas
- Si compliqué
- Parce que c'est trop simple
- Elle est décrite dans les spécifications de Markdown (y'en a pour 25 minutes de lecture)
- Il faut cliquer sur le stylo là haut pour éditer la page
- Il ne faut pas hésiter à regarder le code source
- Il est possible décrire des livres entiers en utilisant ce principe