sparkfun/esp32_lora_1ch_gateway

ESP32+RFM95 = Single-channel LoRa WiFI Gateway (or device!)

SparkFun LoRa Gateway 1-Channel

SparkFun LoRa Gateway 1-Channel (15006)

A programmable microcontroller featuring both WiFi and Bluetooth radios -- with an RFM95W LoRa transceiver to create a single-channel LoRa gateway. It's a perfect, low-cost tool for monitoring a dozen-or-so LoRa devices, and relaying their messages up to the cloud.

Repository Contents

• /Documentation - Data sheets, additional product information
• /Firmware - Example code
• /Hardware - Eagle design files (.brd, .sch)

Documentation

• Library - Arduino library for the SparkFun LoRa Gateway 1-Channel.
• Hookup Guide - Basic hookup guide for the SparkFun LoRa Gateway 1-Channel.
• SparkFun Fritzing repo - Fritzing diagrams for SparkFun products.

Product Versions

• 15006 - SparkFun LoRa Gateway 1-Channel

Version History

• v10 - Initial redboard release

License Information

This product is open source!

Please review the LICENSE.md file for license information.

If you have any questions or concerns on licensing, please contact [email protected].

Distributed as-is; no warranty is given.

• Your friends at SparkFun.

esp32_lora_1ch_gateway's Issues

Eng. Checklist - REDS Issues

(1) ESP and dual-trans not in SFE eagle libraries.

(2) Got a couple instances of GND and PWR nets that are not using the correct GND and PWR symbols

(3) There are quite a few BOM/design discrepancies

(4) Silk recommendations:
-The "RST" silk is being cut off by tSTOP
-Can we move the "0" silk closer to the button? Currently the silk is closer to the qwiic connector
-SCL and SDA could be aligned better (top and bottom)

Reception unsuccessful

HI，
When I successfully ran this program, I used a device to send a message to it, sometimes it was sensitive to receive, sometimes it was not sensitive to receive, I would like to ask how to exclude this problem, looking forward to your reply