sparkfun/roshamglo

Giveaway rock, paper, scissors laser tag badge.

SparkFun Roshamglo

Giveaway rock, paper, scissors laser tag badge.

SparkFun Roshamglo (KIT-14130)

The SparkFun Roshamglo is a badge that can be worn with a lanyard clip that has been designed to play Rock Paper Scissors. The board uses the ATtiny84, and has an IR LED and receiver to communicate between badges. To play, simply point the USB connector at your opponents controller up to 5 feet away and press the 5-way switch to the left for rock, up for paper, and right for scissors. The red/green LED will display a solid red for lose, green for win, or alternate red and green for a tie. The Roshamglo uses the Micronucleaus bootloader, which allows for USB programming from the Arduino IDE.

Repository Contents

• /Artwork - Artwork for custom images (.svg)
• /Bootloader - Files needed to install the Micronucleaus bootloader
• /Datasheets - Datasheets for various components used (.pdf)
• /Firmware - Code used to play Rock Paper Scissors (.ino)
• /Hardware - All Eagle design files (.brd, .sch, .dxf, .lbr, .scr)

Documentation

• Hookup Guide - Basic hookup guide.
• Roshamglo Project: TV-B-Gone
• Hack Your Roshamglo Badge

License Information

The hardware is released under Creative Commons ShareAlike 4.0 International. The code is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round!

Distributed as-is; no warranty is given.

roshamglo's Issues

Arduino IDE and Roshamglo setup

Hello all,
I just tried to hook-up my Roshamglo (got it from friend) and followed the instructions from sparkfun but Arduino IDE definition for Roshamglo are not working. Link mentioned in text is 404:

https://raw.githubusercontent.com/sparkfun/Arduino_Boards/tiny/IDE_Board_Manager/package_sparkfun_index.json

Can you please update documents or make this link working?

Best regards,

v02 checklist issues

(1) 1 x RES-07856 and 1 x SWCH-13065 need to be added to the BOM

(2) I think this was discussed and labeled a non-issue, but the battery clips encroach on the standoff keepouts. If this is realized, please omit this issue.

Scoreboard Installation Instructions

It would be nice to have a README / setup instructions for the scoreboard side of things in the repo. I will see what I can do to dig in and look at it. @NPoole do you have any thoughts / willing to do so, it would be ideal, but I know you are on other things ;)

checklist v01

(1) need 1 RES-00824 added to the BOM

(2) Need standoffs on measures

(3) switch ROUTE OUT to dimension layer