sqfmi / watchy-cases Goto Github PK

View Code? Open in Web Editor NEW

91.0 9.0 20.0 552.13 MB

Collection of Watchy Case/Body designs

License: MIT License

OpenSCAD 100.00%

watchy-cases's Introduction

Watchy Cases

Collection of Watchy Case/Body designs.

Learn more about Watchy here: https://watchy.sqfmi.com

You can find Watchy's base model here

Official Watchy Cases

There are 2 official Watchy cases:

Yatari (Injection Molded Plastic)
Armadillonium (CNC Anodized Aluminum)

Got a cool design? Share it with us!

Submit a pull request or comment in issues
Please provide the following in your README:
- Name of design
- Author/credits
- License (e.g. MIT/CC by SA/etc.)
- List of files (e.g. 1 x top.stl, 1 x bottom.stl, 4 x button.stl, model.step, ... )
- Any assembly/printing/machining tips
- Photos (real and/or renders)
- Any links for more information

watchy-cases's People

Contributors

Stargazers

Watchers

watchy-cases's Issues

Missing contributor for Tech_Case

There appears to be a community contribution which was not attributed - https://github.com/sqfmi/watchy-cases/tree/main/Tech_Case

@sqfmi do you know who this was?

Link to abetusk in Watch-o case readme

Thought it would be nice to link to @abetusk in the readme for convenience.

https://github.com/sqfmi/watchy-cases/tree/main/watch-o

Missing content in snappy case readme

https://github.com/sqfmi/watchy-cases/tree/main/snappy

Missing contributor for Peechy

There appears to be a community contribution which was not attributed - https://github.com/sqfmi/watchy-cases/tree/main/Peechy

@sqfmi do you know who this was?

Missing README ?

Could someone describe the differences between the Quattro and Armadillonium cases in the README? It would also be nice if there was a bit more description about the competition and a list of the cases submitted for that as well to provide a bit of orientation in the archive.

Peechy

Hello,

Name : Peechy
Licence : Do whathever you want
List of files : Top, Bottom and Button

Here is Peechy, a cross design between Pebble and Watchy.

STL Files : ( Can't upload STL directly ) Peechy-STL.zip

I'm not an expert in 3D or technical design, the files are not as clean as the reference design, I tried to submit a design that would fullfil my wishes about the watch.

What I love about Watchy, is the blunt design, I really likes the fact that you can see the components directly on your wrist, making the form being the function.
I appreciate a bit of comfort too, so I tried to mix the Watchy reference case, with the entire screen board visible and buttons a bit more integrated than the reference design.

Here is some pictures !

Don't forget the metal 👍

Have a great day !

Watchy watch band doesn't fit the other cases

I've now 3D printed Dos, Boxy, and Quattro watch cases and the silicone watch band that comes with the Watchy doesn't fit in any of them. The watch band needs about 24mm but the watch cases only have about 22.3mm of space. Why is there a 1.5mm difference in width between the injection molded case and the other cases?

Dos 22.7mm
Boxy 22.3mm
Quattro 22.6mm
Injection molded Watchy case 24.1mm

Watchy Armadillonium case + Leatherman Tread (LT)

This is not an issue per se, but I wanted to record this somewhere, in case others are after this.

I have found a way to use a Leatherman Tread (LT) as the wristband for an Armadillonium case. tl;dr: not an exactly perfect fit, but it works.

I found some adapters on AliExpress. There are many options (including many knock-off Treads), but I lucked out on my first try with the following:

https://www.aliexpress.com/item/4001012613514.html?spm=a2g0o.order_detail.0.0.7b32f19cCVEXDa
For 2.45cm Bracelet
For 24mm Watch

It mostly works, however:

The links fit very very tightly in the case. The little holes for the springs could not be any further in, or any closer to the back of the case. Actually, it is so tight that it's impossible for the link to be fully flat with the back of the case, but this is not an issue when wearing the watch.
The 2.45cm width does NOT actually match the Leatherman Tread LT links. They are ~18mm wide, but this was not an option for this particular set of links. Fortunately, the attachments still fit, but there's a bit of wobble (which can probably be addressed with small washers), and the screws cannot go all the way into the link. This makes the attachment of the link a bit stiff. However, once again, it's not an issue when wearing the watch.

Tech Case

Name : Tech Case
License : Open/MIT
List of files : Top.stl, Bottom.stl, Button.stl (4)

Here is my attempt at a case for Watchy. I wanted it to look more techincal/geometric and not bulky. The use of the existing strap holes hopefully makes it more minimal and sleeker as well, while still offering some protection.

It may need small updates for it to actually work, due to clearances/etc. (I don't yet have the watchy or a 3D printer.)

Attached are also some quick renders. If anyone wants to submit some better renders, that would be great!

Thanks!

README.txt
TechCase.zip

Missing content in quattro case readme

https://github.com/sqfmi/watchy-cases/tree/main/quattro

Link to Frans van Bellen/Brain in a Bowl in Slim case readme

Thought it would be nice to link to author in the readme for convenience. @sqfmi could you advise if this is the correct attribution?

https://braininabowl.com/

Add link to contributor in Party readme

Thought it would be nice to link to author @uncle-yura in the readme for convenience https://github.com/sqfmi/watchy-cases/tree/main/Party

Add license to Armadillonium

Armadillonium appears to be missing a license as mentioned in the main repository readme

Add gifs to readme for Party

Thought it would be good to see the gifs in the readme rather than needing to open them from the folders

Missing content in snappy case readme

https://github.com/sqfmi/watchy-cases/tree/main/snappy

Missing content in duplo case readme

https://github.com/sqfmi/watchy-cases/tree/main/duplo

Model size is too small

I am unsure what unit system the original model was built with, but when I go to import the STL into Zotrax Z-Suite it says "it looks like it was made in inches, convert to millimeters?". If you click yes, the model that shows up is less than 1mm wide. If you click no, the model does not seem to appear. I opened it in Rhino and it asks me what unit system to import it with, centimeters, inches and millimeters are all wrong I think as the model still shows up too small.

What unit system was this model created with?

License Clarification Flipped Chamfer

@demseyk nice work on the Flipped Chamfer design, could you please advise on which specific Open Source license (e.g. MIT/CC by SA/etc.) you're releasing your work under?

https://github.com/sqfmi/watchy-cases/tree/main/Flipped%20Chamfer

Slim

Introducing Slim: the minimal case for Watchy.
https://github.com/BraininaBowl/Slim---A-case-for-Watchy

A watch case carefully designed to add as little bulk as possible. You'll need the front, the back and four buttons. Installation: But the back down on its back. Slip the four buttons in, lower your Watchy into it and put the face plate on top of it all. Just thread your strap through the hoops and you're ready to go.

Files:
Slim V4.5.3 - back.stl
Slim V4.5.3 - button.stl
Slim V4.5.3 - front.stl

Licence:
MIT

Author:
Frans van Bellen/Brain in a Bowl