stanciuoctavian/windows-testing

Containers, scripts and documentation for running Kubernetes tests with Windows nodes

kubernetes-sigs/windows-testing

This repo is a collection of scripts, containers, and documentation needed to run Kubernetes test passes on clusters with Windows worker nodes. It is maintained by sig-windows.

If you're looking for the latest test results, look at TestGrid for the SIG-Windows results. These are the periodic test passes scheduled by Prow (see: config). If you have questions interpreting the results, please join us on Slack in #SIG-Windows.

If you're new to building and testing Kubernetes, it's probably best to read the official End-to-End Testing in Kubernetes page first. The rest of this page has a summary of those steps tailored to testing clusters with Windows nodes.

Building Tests

e2e.test

The official steps are in kubernetes/community. For more details, be sure to read that doc. This is just a short summary.

Make sure you have a working Kubernetes development environment on a Mac or Linux machine. If you're using Windows, you can use WSL, but it will be slower than a Linux VM. The tests can be run from the same VM, as long as you have a working KUBECONFIG.

go get -d k8s.io/kubernetes
cd $GOPATH/src/k8s.io/kubernetes
./build/run.sh make WHAT=test/e2e/e2e.test

Once complete, the binary will be available at: ~/go/src/k8s.io/kubernetes/_output/dockerized/bin/linux/amd64/e2e.test

Cross-building for Mac or Windows

To build a binary to run on Mac or Windows, you can add KUBE_BUILD_PLATFORMS.

For Windows

./build/run.sh make KUBE_BUILD_PLATFORMS=windows/amd64 WHAT=test/e2e/e2e.test

For Mac

./build/run.sh make KUBE_BUILD_PLATFORMS=darwin/amd64 WHAT=test/e2e/e2e.test

Your binaries will be available at ~/go/src/k8s.io/kubernetes/_output/dockerized/bin/linux/amd64/e2e.test where linux/amd64/ is replaced by KUBE_BUILD_PLATFORMS if you are building on Mac or Windows.

Running an e2e test pass

Using an existing cluster

All of the tests are built into the e2e.test binary, which you can as a standalone binary to test an existing cluster.

There are a few important parameters that you need to use:

• --provider=skeleton - this will avoid using a cloud provider to provision new resources such as storage volumes or load balancers
• --ginkgo.focus="..." - this regex chooses what Ginkgo tests to run.
• --node-os-distro="windows" - some test cases have different behavior on Linux & Windows. This tells them to test Windows.
• --ginkgo.skip="..." - this regex chooses what tests to skip
• If you're not sure what test cases will run, add --gingkgo.dryRun=true and it will give a list of test cases selected without actually running them.

e2e.test also needs a few environment variables set to connect to the cluster, and choose the right test container images. Here's an example:

export KUBECONFIG=path/to/kubeconfig
curl https://raw.githubusercontent.com/kubernetes-sigs/windows-testing/master/images/image-repo-list-ws2019 -o repo_list
export KUBE_TEST_REPO_LIST=$(pwd)/repo_list

Once those are set, you could run all the [SIG-Windows] tests with:

./e2e.test --provider=skeleton --ginkgo.noColor --ginkgo.focus="\[sig-windows\]" --node-os-distro="windows"

The full list of what is run for TestGrid is in the sig-windows-config.yaml after --test-args. You can copy the parameters there for a full test pass.

./e2e.test --provider=skeleton --node-os-distro=windows --ginkgo.focus=\\[Conformance\\]|\\[NodeConformance\\]|\\[sig-windows\\]|\\[sig-apps\\].CronJob --ginkgo.skip=\\[LinuxOnly\\]|\\[k8s.io\\].Pods.*should.cap.back-off.at.MaxContainerBackOff.\\[Slow\\]\\[NodeConformance\\]|\\[k8s.io\\].Pods.*should.have.their.auto-restart.back-off.timer.reset.on.image.update.\\[Slow\\]\\[NodeConformance\\]"

Using kubetest to deploy, test, and clean up a cluster

Kubetest is a wrapper that includes everything needed to deploy a cluster, test it (using e2e.test), gather logs, then upload the results to a Google Storage account. It has built-in cloud provider scripts to build Linux+Windows clusters using Azure and GCP.

Azure

TODO: This section is still under construction

Set environment variables:

AZURE_SSH_PUBLIC_KEY_FILE - Path to the SSH public key you want to use for connecting to the cluster nodes. This is probably ~/.ssh/id_rsa.pub

AZURE_CREDENTIALS - Path to a TOML file with a service account credential that will be used for creating the Azure resources

[Creds]
  ClientID = ""
  ClientSecret = ""
  SubscriptionId = ""
  TenantID = ""
  StorageAccountName = ""
  StorageAccountKey = ""

Once those are set, you can run kubetest and it will do the rest. The full set of tests will take 6-7 hours.

export KUBE_MASTER_IP=#IP of master node if running remotely, or localhost if running on master node
export KUBE_MASTER_URL="http://${KUBE_MASTER_IP}:8080"
export KUBECONFIG=#path/to/kubeconfig
curl https://raw.githubusercontent.com/kubernetes-sigs/windows-testing/master/images/image-repo-list-ws2019 -o repo_list
export KUBE_TEST_REPO_LIST=$(pwd)/repo_list
export AZURE_CREDENTIALS=TODO
kubetest --test=true \
  --up=true \
  --down=true \
  --deployment=acsengine \
  --provider=skeleton \
  --build=bazel \
  --acsengine-location=westus \
  --acsengine-admin-username=azureuser \
  --acsengine-admin-password=MakeItSecure123! \
  --acsengine-creds=$AZURE_CREDENTIALS \
  --acsengine-download-url=https://github.com/Azure/aks-engine/releases/download/v0.30.0/aks-engine-v0.30.0-linux-amd64.tar.gz \
  --acsengine-public-key=$AZURE_SSH_PUBLIC_KEY_FILE \
  --acsengine-winZipBuildScript=https://raw.githubusercontent.com/Azure/acs-engine/master/scripts/build-windows-k8s.sh \
  --acsengine-orchestratorRelease=1.13 \
  --acsengine-template-url=https://raw.githubusercontent.com/kubernetes-sigs/windows-testing/master/job-templates/kubernetes_release.json \
  --acsengine-agentpoolcount=3 \
  --test_args=--node-os-distro=windows --ginkgo.focus=\\[Conformance\\]|\\[NodeConformance\\]|\\[sig-windows\\]|\\[sig-apps\\].CronJob --ginkgo.skip=\\[LinuxOnly\\]|\\[k8s.io\\].Pods.*should.cap.back-off.at.MaxContainerBackOff.\\[Slow\\]\\[NodeConformance\\]|\\[k8s.io\\].Pods.*should.have.their.auto-restart.back-off.timer.reset.on.image.update.\\[Slow\\]\\[NodeConformance\\]

Google Compute Platform

TODO: This section is still under construction

Building Test Images

images/ - has all of the container images used in e2e test passes and the scripts to build them. They are replacement Windows containers for those in kubernetes/test/images