studiokestra/generic65

A generic 65% gasket mount keyboard case.

Generic65

Generic65 is an open-source 65% keyboard case. It uses a gasket mounting style and was designed around the KBD67v2 MKII PCB. The plate supports the following layout that everyone seems to love:

Note that this design has not been prototyped or tested, please use at your own risk.

About

• 65% layout with arrow blocker
• Includes Top Right Blocker and no Top Blocker options
• 5 degree typing angle
• ~18mm front height
• M3x0.5 10mm case screws
• 8x2.5mm 3M bumpons for case feet
• Leverages AEBoards' gasket design https://www.aeboards.com/resources
• 1mm distance between plate and case (66% compression with 1.5mm gasket, 50% compression with 2mm gaskets)

License

Case design is licensed under Apache License 2.0.

TLDR; this means:

• You are free to use for private and commercial use
• You are free to distribute and modify the files
• Any modifications to the design must also be licensed under Apache 2.0
• Any modifications to the design must be documented
• You must add an attribution notice to any derivative works
• Design cannot be trademarked
• I am not liable for anything that comes out of you using this design
• Design provided as is with no warranty

Although not required, it would be great if you notify me before running any form of group-buy with the Generic65 or its derivatives.

generic65's Issues

Sizing of arrow cluster separator

Hello,

At present the separator between modifier and left arrow key is 11mm. At that size, it does not accomodate the plate layout as listed. I believe the separator should be 8.5mm, from measuring the Savage65 case which support this layout.

My learning curve for CAD software is too steep to make a pull request at this time.

Thank you

What program did you use, I need the files with out beveled edges.