suaryxukun/reppanel_esp32

Alternative to PanelDue. Embedded UI for Duet & RepRap based 3D printers. Running on the ESP32. Optimized for 3.5" displays. WiFi or UART connectivity.

RepPanel

A simple user interface for Duet/RepRap based 3D printers. Optimized for 3.5" touch panels controlled via SPI & I²C using an ESP32.

Supports wireless connection or wired via UART/PanelDue port.

An open source alternative to the PanelDue.

• Cheap (~18€ display + 7€ ESP32)
• Beautifully dark
• Compact and easy to use
• Support for most operations required to set up a 3D print
• Wireless connection - portable with power bar
• PanelDue-port/UART connection

Features

Since RepPanel boots in ~1 second you can start setting up your printer in no time and with no additional hardware. No need to get the laptop and log in to DuetWebControl. No need to get mad over using WebControl in your smartphones browser.

• Start, Stop, Pause & Resume print jobs based of Duets SD card
• Simulate print jobs
• Delete print jobs
• Run macros (no dictionary support yet)
• Home X, Y, Z or All axis
• Load/Unload filament per tool
• Set bed temperatures
• Set tool temperatures
• Monitor temperatures
• Monitor print job:
  • Percent complete
  • Duration
  • Elapsed time (based of simulation, otherwise from file)
  • Job name
  • Current layer
• Run manual and automated bed leveling
• Automatic reconnection
• Low latency

What this project is not

A full replacement for the DuetWebControl interface.

Supported Hardware/Software

The RepPanel project is based on the Littlevgl port for the ESP32. In theory This means all displays and touch controllers supported by the lv_port_esp32 project are also supported by RepPanel.

Tested Hardware

• ESP32 DevKit
• ER-TFTM035-6 display with capacitive touch screen

Other display modules with a resolution of 480x320 should also work as long as they are supported by lv_port_esp32
As of now RepPanel is optimized for 3.5" displays with a resolution of 480x320 pixels. The display is connected via SPI.

Tested Firmware

• Duet2 WiFi running RepRap Firmware v3.0 and corresponding Duet2WebControl
• Duet2 WiFi running RepRap Firmware v3.1 and corresponding Duet2WebControl

Installation

Compile yourself

Set up ESP-IDF

Follow instructions on offical Espressif site.
ESP-IDF v4.0 is officially supported.

Clone Project

git clone --recurse-submodules https://github.com/seeul8er/RepPanel_ESP32

Configure Project

Temporary workaround:
Copy file content of main/lv_conf_back.h over to externals/lv_port_esp32/components/lvgl/lv_conf.h.
Or simply add:

• Set LV_USE_USER_DATA to 1
• Add #define LV_USE_THEME_REP_PANEL_DARK 1
• CONFIG_LVGL_FONT_ROBOTO16 & CONFIG_LVGL_FONT_ROBOTO22 must be activated
• Add

#define LV_FONT_CUSTOM_DECLARE  LV_FONT_DECLARE(reppanel_font_roboto_bold_16) \
                                       LV_FONT_DECLARE(reppanel_font_roboto_bold_18) \
                                       LV_FONT_DECLARE(reppanel_font_roboto_bold_24) \
                                       LV_FONT_DECLARE(reppanel_font_roboto_regular_26) \
                                       LV_FONT_DECLARE(reppanel_font_roboto_light_26) \
                                       LV_FONT_DECLARE(reppanel_font_roboto_thin_numeric_160) \
                                       LV_FONT_DECLARE(reppanel_font_roboto_regular_percent_40)

From its root run:

idf.py menuconfig

See Littlevgl port for the ESP32 for further and more detailed instructions.

Compile & Flash

idf.py build
idf.py -p (YOUR PORT) flash

See Littlevgl port for the ESP32 for further and more detailed instructions.

Use ready made images

Ready made images are only available for selected hardware combinations! Please compile the project by yourself in case you use different hardware or want a different pin connection layout

Check out releases for compiled binaries.

Wiring ER-TFTM035-6 to the ESP32 DevKit

Beware: The available development boards have different pin configurations. Some have GND & 3.3V at the bottom. Others at the top.

Pin configuration of ready made images:

**Pin Number ESP32 **	Pin Number ER-TFTM035-6	Function	Description
VCC 3.3V	2	Power supply	Match TFT voltage with ESP32 pin
GND	1	GND	Ground
GPIO 13	27	MOSI	Data line to TFT
GPIO 14	24	SCL	SPI CLK for TFT
GPIO 15	23	Slave Select	SPI
GPIO 22	30	SCL	I²C - touch
GPIO 21	31	SDA	I²C - touch
GPIO 4	21	Reset	TFT related
GPIO 2	25	Data	TFT related
GPIO 27	29	Backlight	Turn on/off TFT backlight
GPIO 17	-	UART TX	Connect to RX PanelDue port
GPIO 16	-	UART RX	Connect to TX PanelDue port

Screenshots

For Developers

Check out the simulator project. Simulates the RepPanel GUI on Desktop computers for more efficient testing and implementation.

Known Limitations

• Multiple tools supported but not tested
• Auto swap from UART to WiFi connection might take up to 10s
• Entries per directory listing limited to 16 for jobs and macros
• Directory path limited to 128 characters
• Filament listing (all filament names separated by one character) limited to 1014
• Can not list all files within a directory in case DuetWebControl API requires multiple requests per listing
  • Workaround: Delete files to reduce file count to make all files fit within one response