suddi/playbooks

Personal Ansible playbooks to provision resources and deploy on AWS, GCP and Heroku

playbooks's Issues

Action required: Greenkeeper could not be activated 🚨

🚨 You need to enable Continuous Integration on all branches of this repository. 🚨

To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because we are using your CI build statuses to figure out when to notify you about breaking changes.

Since we did not receive a CI status on the greenkeeper/initial branch, we assume that you still need to configure it.

If you have already set up a CI for this repository, you might need to check your configuration. Make sure it will run on all new branches. If you don’t want it to run on every branch, you can whitelist branches starting with greenkeeper/.

We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.

Once you have installed CI on this repository, you’ll need to re-trigger Greenkeeper’s initial Pull Request. To do this, please delete the greenkeeper/initial branch in this repository, and then remove and re-add this repository to the Greenkeeper integration’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.

Version 10 of node.js has been released

Version 10 of Node.js (code name Dubnium) has been released! 🎊

To see what happens to your code in Node.js 10, Greenkeeper has created a branch with the following changes:

• Replaced the old Node.js version in your .nvmrc with the new one
• The new Node.js version is in-range for the engines in 1 of your package.json files, so that was left alone

If you’re interested in upgrading this repo to Node.js 10, you can open a PR with these changes. Please note that this issue is just intended as a friendly reminder and the PR as a possible starting point for getting your code running on Node.js 10.

More information on this issue

Greenkeeper has checked the engines key in any package.json file, the .nvmrc file, and the .travis.yml file, if present.

• engines was only updated if it defined a single version, not a range.
• .nvmrc was updated to Node.js 10
• .travis.yml was only changed if there was a root-level node_js that didn’t already include Node.js 10, such as node or lts/*. In this case, the new version was appended to the list. We didn’t touch job or matrix configurations because these tend to be quite specific and complex, and it’s difficult to infer what the intentions were.

For many simpler .travis.yml configurations, this PR should suffice as-is, but depending on what you’re doing it may require additional work or may not be applicable at all. We’re also aware that you may have good reasons to not update to Node.js 10, which is why this was sent as an issue and not a pull request. Feel free to delete it without comment, I’m a humble robot and won’t feel rejected 🤖

---

FAQ and help

There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.

---

Your Greenkeeper Bot 🌴

An in-range update of sinon is breaking the build 🚨

Version 5.0.9 of sinon was just published.

Branch	Build failing 🚨
Dependency	sinon
Current Version	5.0.8
Type	devDependency

This version is covered by your current version range and after updating it in your project the build failed.

sinon is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Status Details

• ❌ ci/circleci Your tests failed on CircleCI Details

---

Commits

The new version differs by 5 commits.

• 86b930c Update docs/changelog.md and set new release id in docs/_config.yml
• 033aa60 Add release documentation for v5.0.9
• 3321085 5.0.9
• 9f321d5 Update History.md and AUTHORS for new release
• e862196 Upgrade @std/esm to esm.

See the full diff

FAQ and help

There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.

---

Your Greenkeeper Bot 🌴

An in-range update of commander is breaking the build 🚨

Version 2.18.0 of commander was just published.

Branch	Build failing 🚨
Dependency	commander
Current Version	2.17.1
Type	dependency

This version is covered by your current version range and after updating it in your project the build failed.

commander is a direct dependency of this project, and it is very likely causing it to break. If other packages depend on yours, this update is probably also breaking those in turn.

Status Details

• ❌ ci/circleci: Your tests failed on CircleCI (Details).

---

Release Notes

v2.18.0

• Standardize help output (#853)
• chmod 644 travis.yml (#851)
• add support for execute typescript subcommand via ts-node (#849)

Commits

The new version differs by 5 commits.

• 54b7f14 version bump 2.18.0
• 713db77 Standardize help output (#853)
• af17996 chmod 644 travis.yml
• 8bcc493 Merge pull request #849 from KillWolfVlad/feature/executeSubCommand-tsnode
• bf47dcc add support for execute typescript subcommand via ts-node

See the full diff

FAQ and help

There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.

---

Your Greenkeeper Bot 🌴

An in-range update of sinon is breaking the build 🚨

☝️ Greenkeeper’s updated Terms of Service will come into effect on April 6th, 2018.

Version 4.4.7 of sinon was just published.

Branch	Build failing 🚨
Dependency	sinon
Current Version	4.4.6
Type	devDependency

This version is covered by your current version range and after updating it in your project the build failed.

sinon is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Status Details

• ❌ ci/circleci Your tests failed on CircleCI Details

---

Commits

The new version differs by 7 commits.

• e060fe9 Update docs/changelog.md and set new release id in docs/_config.yml
• e9fce06 Add release documentation for v4.4.7
• f047838 4.4.7
• cc91fe6 Update History.md and AUTHORS for new release
• 9fb8577 Emojify the support message :heart:
• a87ef85 Use existing mini-lib for coloring
• 1f33fe5 Reduce noisy NPM output from postinstall script

See the full diff

FAQ and help

There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.

---

Your Greenkeeper Bot 🌴