sujianleo/core_mmc

MMC (and derivative standards) host controller

MMC (and derivative standards) Host Controller

Github: https://github.com/ultraembedded/core_mmc

Work-in-progress - basically functional but not yet complete / robust.

Features

• 1-bit / 4-bit data modes.
• Large sector buffer (for multiple sector reads or writes).
• AXI-4 DMA.

Current Bugs

• DMA: Does not support card write mode (functions as read from card only).
• Robustness: Not currently checking CRC7 / CRC16 on incoming responses.
• Writes: Multi-sector write support is not correct.
• AXI: Dubious combinatorial paths on AWVALID and WVALID.

Testing

Exercised on the following FPGA boards;

• Digilent Arty A7 (Xilinx Artix 7)
• LambaConcept ECPIX-5 (Lattice ECP5)

Register Map

Offset	Name	Description
0x00	MMC_CONTROL	[RW] Transfer Control Register
0x04	MMC_CLOCK	[RW] Clock Configuration Register
0x08	MMC_STATUS	[R] Transfer Status Register
0x0c	MMC_CMD0	[RW] Command (first 32-bits)
0x10	MMC_CMD1	[RW] Command (subsequent 16-bits)
0x14	MMC_RESP0	[R] Response Register
0x18	MMC_RESP1	[R] Response Register
0x1c	MMC_RESP2	[R] Response Register
0x20	MMC_RESP3	[R] Response Register
0x24	MMC_RESP4	[R] Response Register
0x28	MMC_TX	[W] Data Transmit Register
0x2c	MMC_RX	[R] Data Receive Register
0x30	MMC_DMA	[RW] DMA Target

Register: MMC_CONTROL

Bits	Name	Description
31	START	Start transfer.
30	ABORT	Abort transfer.
29	FIFO_RST	FIFO reset.
15:8	BLOCK_CNT	Number of blocks (0=1, 1=2, ...)
5	WRITE	Data write operation
4	DMA_EN	DMA port enable
3	WIDE_MODE	4-bit data mode.
2	DATA_EXP	Wait for data
1	RESP136_EXP	Wait for response (R2).
0	RESP48_EXP	Wait for response (~R2).

Register: MMC_CLOCK

Bits	Name	Description
7:0	DIV	Clock divider

Register: MMC_STATUS

Bits	Name	Description
8	CMD_IN	Command input line state
7:4	DAT_IN	Data input line state
3	FIFO_EMPTY	FIFO empty.
2	FIFO_FULL	FIFO full.
1	CRC_ERR	CRC error
0	BUSY	Transfer active

Register: MMC_CMD0

Bits	Name	Description
31:0	VALUE	Command data.

Register: MMC_CMD1

Bits	Name	Description
15:0	VALUE	Command data.

Register: MMC_RESP0

Bits	Name	Description
31:0	VALUE	Response data.

Register: MMC_RESP1

Bits	Name	Description
31:0	VALUE	Response data.

Register: MMC_RESP2

Bits	Name	Description
31:0	VALUE	Response data.

Register: MMC_RESP3

Bits	Name	Description
31:0	VALUE	Response data.

Register: MMC_RESP4

Bits	Name	Description
31:0	VALUE	Response data.

Register: MMC_TX

Bits	Name	Description
31:0	DATA	Data

Register: MMC_RX

Bits	Name	Description
31:0	DATA	Data

Register: MMC_DMA

Bits	Name	Description
31:0	ADDR	Start address