sunyiwei24601/bbrreproduce

Reproduce BBR Algorithm

Intro

This project is intended to reproduce BBR purposed in paper "BBR: Congestion-Based Congestion Control, 2016 Neal Cardwell Yuchung Cheng etc", a new TCP Congestion Control Algorithm. We build a workflow from network simulation, connection testing, logs analyzer and visualization.

In General, we use mininet to simulate the network environment, iperf3 to create connections and record the RTT and cwnd size, ethstats and ifstat to measure the traffic. We save the output of iperf3, ethstats and ifstat in log files and use analyzer to convert the raw l ogs into structured csv data. At last, we use tensorboard to visualize all the experiment results at the same time.

   ┌─────────────┐
   │             │
   │  Start up   │
   │             │
   │             │
   └──────┬──────┘
          │
          │ testbed.py + experiments.py
   ┌──────▼──────┐
   │             │
   │    logs     │
   │             │
   │             │
   └──────┬──────┘
          │
          │ analyzer.py   
   ┌──────▼──────┐
   │             │
   │ analysis.csv│
   │             │
   │             │
   └──────┬──────┘
          │
          │ gen_tensorboard.py
   ┌──────▼──────┐
   │             │
   │             │
   │   tf_logs   │
   │             │
   └─────────────┘

File structure

• Experiments Related
  • testbed.py, create network topology, run mininet and create connections. The core of all the experiments.
  • util.py, wrap some command line tools like iperf3 and ethstats to create connections easier.
  • experiments.py, wrap some commonly used experiments parameters and environment sets in functions to run the tests in batch.
  • run.sh, virtual machine set up commands. Help install all the dependecies you need to run the experiments. But you need to switch different linux kernel on your own.
• Logs
  • logs every experiment will create a log dir under logs in the name of experiment parameter and time. For example, dir 2022-04-26-22-50-25_bbr_1hosts_delay=40ms_loss=0_bw=100_duration=10_start_delay=0_5.13.12bbr2 save the log file of experiment running in 2022-04-26-22-50-25, with one bbr flow, 40 ms delay, 0% loss rate, 100Mbps bandwidth, duration 10 seconds and each flow start at the same time(start_delay = 0). What's more, this experiment is running on Linux Kernel 5.13.12bbr.
• Analyzer and Visualization
  • analyzer.py read all log files generated by ethstats and ifstat, convert them into structured csv data analysis_microsecond(from ifstat), analysis_second(from ethstats).
  • iperf_analyzer.py read all log files generated by iperf, and save them into analysis_rec.csv(from receiver iperf logs), analysis_send.csv(from sender iperf logs).
  • gen_iperf_tensorboard.py read structured csv data from iperf and draw tensorboard figures into tf_send_logs.
  • gen_tensorboard.py read structured csv data from ifstat and ethstat and save them into tf_logs_1, tf_logs_10.
• BBR
  • bbr save all different versions of bbr source code.

How to see the results of the experiments

I have upload my experiment results in this repository, So can skip step 1 and 2 to see them.

If you want to see experiment results run by your own, you should do the experiments on your own and run all the following 3 steps.

1. First you need run python3 analyzer/analyzer.py and python3 analyzer/iperf_analyzer.py to generate analysis.csv files.
2. Next you need run python3 analyzer/gen_tensorboard.py and python3 analyzer/gen_iperf_tensorbaord.py to generate tensorboard logs files tf_logs_1 and tf_send_logs.
3. You should run tensorboard commands tensorboard --logdir tf_logs_1 or tensorboard --logdir tf_send_logs to visualize the experiment logs. tf_logs only show Troughput, and tf_send_logs also show RTT and Congestion Window size of sender Hosts.

If everything works well, you can see the figures rightly now. To quickly find the experiment you want, you can use regex expression to filter by the experiment parameters.

For example, bbr_2hosts_delay=40ms_.*_duration=10 will find all the experiments running 2 bbr flows at the same time with delay=40ms and duration=10 second.

cubic1_bbr1_.*_loss=1 will show all the experiments running one cubic flow and one bbr flow at the same time with loss rate = 1%. By the way, if 2 algorithms run at the same time(like n cubic and n bbr), the first n hosts will run cubic and next n hosts will run bbr.