AWS::SES¶ ↑

AWS::SES is a Ruby library for Amazon’s Simple Email Service’s REST API (aws.amazon.com/ses).

Getting started¶ ↑

To get started you need to require ‘aws/ses’:

% irb -rubygems
irb(main):001:0> require 'aws/ses'
# => true

Before you can do anything, you must establish a connection using Base.new. A basic connection would look something like this:

ses = AWS::SES::Base.new(
  :access_key_id     => 'abc', 
  :secret_access_key => '123'
)

The minimum connection options that you must specify are your access key id and your secret access key.

Connecting to a server from another region¶ ↑

The default server API endpoint is “email.us-east-1.amazonaws.com”, corresponding to the US East 1 region.

To connect to a different one, just pass it as a parameter to the AWS::SES::Base initializer:

ses = AWS::SES::Base.new(
  :access_key_id     => 'abc', 
  :secret_access_key => '123',
  :server => 'email.eu-west-1.amazonaws.com',
  :message_id_domain => 'eu-west-1.amazonses.com'
)

Send E-mail¶ ↑

Adds functionality for send_email and send_raw_email Use the following to send an e-mail:

ses = AWS::SES::Base.new( ... connection info ... )
ses.send_email(
             :to        => ['[email protected]', '[email protected]'],
             :source    => '"Steve Smith" <[email protected]>',
             :subject   => 'Subject Line',
             :text_body => 'Internal text body'
)

By default, the email “from” display address is whatever is before the @. To change the display from, use the format:

"Steve Smith" <[email protected]>

You can also send Mail objects using send_raw_email:

m = Mail.new( :to => ..., :from => ... )
ses.send_raw_email(m)

send_raw_email will also take a hash and pass it through Mail.new automatically as well.

Addresses¶ ↑

AWS::SES::Addresses provides for:

Listing verified e-mail addresses
Adding new e-mail addresses to verify
Deleting verified e-mail addresses

You can access these methods as follows:

ses = AWS::SES::Base.new( ... connection info ... )

# Get a list of verified addresses
ses.addresses.list.result

# Add a new e-mail address to verify
ses.addresses.verify('[email protected]')

# Delete an e-mail address
ses.addresses.delete('[email protected]')

Info¶ ↑

Adds functionality for the statistics and info send quota data that Amazon SES makes available

You can access these methods as follows:

ses = AWS::SES::Base.new( ... connection info ... )

Get the quota information¶ ↑

response = ses.quota
# How many e-mails you've sent in the last 24 hours
response.sent_last_24_hours
# How many e-mails you're allowed to send in 24 hours
response.max_24_hour_send
# How many e-mails you can send per second
response.max_send_rate

Get detailed send statistics ¶ ↑

The result is a list of data points, representing the last two weeks of sending activity. Each data point in the list contains statistics for a 15-minute interval. GetSendStatisticsResponse#data_points is an array where each element is a hash with give string keys:

Bounces
DeliveryAttempts
Rejects
Complaints
Timestamp

For example:

response = ses.statistics
response.data_points

will return:

[{"Bounces"=>"0",
  "Timestamp"=>"2011-01-26T16:30:00Z",
  "DeliveryAttempts"=>"1",
  "Rejects"=>"0",
  "Complaints"=>"0"},
 {"Bounces"=>"0",
  "Timestamp"=>"2011-02-09T14:45:00Z",
  "DeliveryAttempts"=>"3",
  "Rejects"=>"0",
  "Complaints"=>"0"},
 {"Bounces"=>"0",
  "Timestamp"=>"2011-01-31T15:30:00Z",
  "DeliveryAttempts"=>"3",
  "Rejects"=>"0",
  "Complaints"=>"0"},
 {"Bounces"=>"0",
  "Timestamp"=>"2011-01-31T16:00:00Z",
  "DeliveryAttempts"=>"3",
  "Rejects"=>"0",
  "Complaints"=>"0"}]

Rails¶ ↑

This gem is compatible with Rails >= 3.0.0 and Ruby 2.3.x

To use, first add the gem to your Gemfile:

gem "aws-ses", "~> 0.7.0", :require => 'aws/ses'

For Rails 3.x¶ ↑

Then, add your Amazon credentials and extend ActionMailer in ‘config/initializers/amazon_ses.rb`:

ActionMailer::Base.add_delivery_method :ses, AWS::SES::Base,
  :access_key_id     => 'abc',
  :secret_access_key => '123',
  :signature_version => 4

Then set the delivery method in ‘config/environments/*.rb` as appropriate:

config.action_mailer.delivery_method = :ses

For Rails 2.3.x¶ ↑

Then set the delivery method in ‘config/environments/*rb` as appropriate:

config.after_initialize do
  ActionMailer::Base.delivery_method = :amazon_ses
  ActionMailer::Base.custom_amazon_ses_mailer = AWS::SES::Base.new(:secret_access_key => 'abc', :access_key_id => '123')
end

Issues¶ ↑

HTTP Segmentation fault¶ ↑

If you get this error:

net/http.rb:677: [BUG] Segmentation fault

It means that you are not running with SSL enabled in ruby. Re-compile ruby with ssl support or add this option to your environment:

RUBYOPT="-r openssl"

Rejected sending¶ ↑

If you are receiving this message and you HAVE verified the [source] please check to be sure you are not in sandbox mode!

"Email address is not verified.MessageRejected (AWS::Error)"

If you have not been granted production access, you will have to verify all recipients as well.

To verify email addresses and domains: docs.aws.amazon.com/ses/latest/DeveloperGuide/verify-addresses-and-domains.html

To request production access: docs.aws.amazon.com/ses/latest/DeveloperGuide/request-production-access.html

Source¶ ↑

Available at: github.com/drewblas/aws-ses

Contributing to aws-ses¶ ↑

Check out the latest master to make sure the feature hasn’t been implemented or the bug hasn’t been fixed yet
Check out the issue tracker to make sure someone already hasn’t requested it and/or contributed it
Fork the project
Start a feature/bugfix branch
Commit and push until you are happy with your contribution
Make sure to add tests for it. This is important so I don’t break it in a future version unintentionally.
Please try not to mess with the Rakefile, version, or history. If you want to have your own version, or is otherwise necessary, that is fine, but please isolate to its own commit so I can cherry-pick around it.

Copyright¶ ↑

Thanks¶ ↑

Special thanks to Marcel Molina Jr. for his creation of AWS::S3 which I used portions of to get things working.

Other Contributors:¶ ↑

croaky
nathanbertram
sshaw
teeparham (documentation)
pzb

superlanding / aws-ses Goto Github PK

aws-ses's Introduction