Giter Site home page Giter Site logo

meta-extras's Introduction

meta-extras

Raspberry Pi Langdale BSP RPI0-2w

git clone -b langdale git://git.yoctoproject.org/poky.git
git clone -b langdale git://git.yoctoproject.org/meta-raspberrypi.git
git clone -b langdale git://git.openembedded.org/meta-openembedded
git clone -b langdale https://github.com/intel-iot-devkit/meta-iot-cloud.git 
git clone [email protected]:Switchpoint-Online/meta-extras.git -b kirkstone
source poky/oe-init-build-env
bitbake-layers add-layer ../meta-openembedded/meta-oe
bitbake-layers add-layer ../meta-openembedded/meta-python
bitbake-layers add-layer ../meta-openembedded/meta-multimedia
bitbake-layers add-layer ../meta-openembedded/meta-networking
bitbake-layers add-layer ../meta-raspberrypi
bitbake-layers add-layer ../meta-iot-cloud/
bitbake-layers add-layer ../meta-extras/
bitbake core-image-base --runonly=fetch
bitbake core-image-base

Raspberry Pi Langdale BSP RPI0-2w

bzip2 -d -f core-image-base-raspberrypi0-2w.wic.bz2
sudo dd bs=4M if=core-image-base-raspberrypi0-2w.wic of=/dev/sde status=progress conv=fsync
cd ~/Yocto/build/
exit

Raspberry Pi Langdale BSP CM4-Waveshare Nano ethernet

bzip2 -d -f core-image-base-raspberrypi4-64.wic.bz2
sudo dd status=progress conv=fsync bs=4M if=core-image-base-raspberrypi4-64.wic of=/dev/sdf
exit

setup security and install FTP NODE

Run as root

su root

hostnamectl set-hostname "TDN-ETHv3"
nmcli d wifi conn B26A24 password "Rn!ug:Po(aA{;g2ATf7|UxwtkX3Q)sZ3"
nmcli c down B26A24
nmcli d wifi hotspot ifname wlan0 ssid TDN-Portal password "LOGtn63u"
nmcli connection modify Hotspot 802-11-wireless.mode ap 802-11-wireless.band bg
nmcli connection modify Hotspot wifi-sec.key-mgmt wpa-psk
nmcli connection modify Hotspot wifi-sec.psk LOGtn63u
nmcli connection modify Hotspot ipv4.method manual ipv4.addresses 192.168.4.1/24 ipv4.gateway 192.168.4.1 ipv4.dns 192.168.4.1
useradd -p $(echo transfer | openssl passwd -1 -stdin) numeronsrv
chmod +x /usr/bin/procscan
mv -v /home/root/app/app/SHA ~/.SHA
npm --prefix /home/root/install install /home/root/app/tdn-ftp_v2-2.0.2.tgz
rm -r ~/.node-red/
mv /home/root/install/node_modules/tdn-ftp_v2/ /home/root/.node-red/
cp -v /home/root/app/app/lib/ui-media/lib/ui/* /home/root/.node-red/node_modules/node-red-dashboard/dist/
cp -v /home/root/app/app/21-httprequest.js /usr/lib/node_modules/node-red/node_modules/@node-red/nodes/core/network/21-httprequest.js
timedatectl set-ntp false

TDN-EWS

hostnamectl set-hostname "TDN-EWSv2"
chmod +x /usr/bin/procscan
mv -v /home/root/app/app/SHA ~/.SHA
npm --prefix /home/root/install install /home/root/app/tdn-ftp_v2-2.0.2.tgz
rm -r /home/root/.node-red/
mv /home/root/install/node_modules/tdn-ftp_v2/ /home/root/.node-red/
cp -v /home/root/app/app/lib/ui-media/lib/ui/* /home/root/.node-red/node_modules/node-red-dashboard/dist/
cp -v /home/root/app/app/21-httprequest.js /usr/lib/node_modules/node-red/node_modules/@node-red/nodes/core/network/21-httprequest.js

AP Configuration PRI

NMCLI

nmcli d wifi conn B26A24 password "Rn!ug:Po(aA{;g2ATf7|UxwtkX3Q)sZ3"
nmcli c down B26A24
nmcli d wifi hotspot ifname wlan0 ssid TDN-Portal password "LOGtn63u"
nmcli connection modify Hotspot 802-11-wireless.mode ap 802-11-wireless.band bg
nmcli connection modify Hotspot wifi-sec.key-mgmt wpa-psk
nmcli connection modify Hotspot wifi-sec.psk LOGtn63u
nmcli connection modify Hotspot ipv4.method manual ipv4.addresses 192.168.4.1/24 ipv4.gateway 192.168.4.1 ipv4.dns 192.168.4.1
nmcli c up Hotspot

setup security and install DiSU NODE

Run as root

su root

hostnamectl set-hostname "TDN-iFaceV4"
useradd -p $(echo r8 | openssl passwd -1 -stdin) config
chmod +x /usr/bin/procscan
mv -v /home/root/app/app/SHA ~/.SHA
npm --prefix /home/root/install install /home/root/app/tdn-ftp_v2-2.0.2.tgz
rm -R ~/.node-red
mv /home/root/install/node_modules/tdn-ftp_v2/ /home/root/.node-red/
cp /home/root/app/app/21-httprequest.js /usr/lib/node_modules/node-red/node_modules/@node-red/nodes/core/network/21-httprequest.js

Clone SD Card and add Serial to DRM

sudo dd if=/dev/sde of=TDN-DiSU_v1.img status=progress

RADXA CM3 IO Board - incl waveshare POE

Working to test

cd Yocto/ 
mkdir TDN-GSI-Radxa-cm3-Dunfell/
cd TDN-GSI-Radxa-cm3-Dunfell/
git clone -b dunfell git://git.openembedded.org/meta-openembedded
git clone -b dunfell git://git.yoctoproject.org/poky.git
git clone -b dunfell git://git.yoctoproject.org/meta-security.git
git clone -b dunfell [email protected]:Switchpoint-Online/meta-extras.git
git clone -b dunfell https://github.com/radxa/meta-radxa.git
git clone -b dunfell https://github.com/YoeDistro/meta-python2.git
source poky/oe-init-build-env
bitbake-layers add-layer ../meta-openembedded/meta-oe/
bitbake-layers add-layer ../meta-openembedded/meta-python/
bitbake-layers add-layer ../meta-openembedded/meta-networking/
bitbake-layers add-layer ../meta-python2/
bitbake-layers add-layer ../meta-extras/
bitbake-layers add-layer ../meta-radxa/
bitbake -k radxa-console-image --runonly=fetch
bitbake -k radxa-console-image```

Install rkdeveloptool

git clone https://github.com/rockchip-linux/rkdeveloptool.git
add rkdeveloptool to /bin PATH

load usb drivers to rk3568 and flash img

sudo rkdeveloptool db ~/Yocto/Rockpi/rk356x_spl_loader_ddr1056_v1.10.111.bin
sudo rkdeveloptool wl 0x0000 ~/Yocto/TDN-GSI-Radxa-cm3-Dunfell/build/tmp/deploy/images/radxa-cm3-io-rk3566/radxa-console-image-radxa-cm3-io-rk3566-gpt.img 
sudo rkdeveloptool rd

setup security and install

Run as root

rock su root passwd root

cd ~/app
tar -xvf node-v16.20.1-linux-arm64.tar.xz
sudo cp -r node-v16.20.1-linux-arm64/{bin,include,lib,share} /usr/
export PATH=/usr/node-v16.20.1-linux-arm64/bin:$PATH
sudo npm install -g --unsafe-perm node-red
npm --prefix /home/root/install install /home/root/app/nr.tgz
mv /home/root/install/node_modules/node-red-project/ /home/root/.node-red/
mv -v /home/root/app/app/lib/ui-media/lib/ui/* /home/root/.node-red/node_modules/node-red-dashboard/dist/
mv -v /home/root/app/app/21-httprequest.js /usr/lib/node_modules/node-red/node_modules/@node-red/nodes/core/network/21-httprequest.js
mv -v node-red.service /lib/systemd/system/node-red.service
mv -v /home/root/app/app/SHA ~/.SHA
systemctl daemon-reload
systemctl enable node-red 
systemctl start node-red

Beaglebone Black kirkstone BSP

git clone -b kirkstone git://git.openembedded.org/meta-openembedded
git clone -b kirkstone git://git.yoctoproject.org/poky.git
git clone -b kirkstone [email protected]:Switchpoint-Online/meta-extras.git
git clone -b kirkstone https://github.com/intel-iot-devkit/meta-iot-cloud.git
source poky/oe-init-build-env
bitbake-layers add-layer ../meta-openembedded/meta-oe
bitbake-layers add-layer ../meta-openembedded/meta-python
bitbake-layers add-layer ../meta-openembedded/meta-multimedia
bitbake-layers add-layer ../meta-openembedded/meta-networking
bitbake-layers add-layer ../meta-extras/
bitbake-layers add-layer ../meta-iot-cloud/
bitbake core-image-minimal --runonly=fetch
bitbake core-image-minimal
sudo dd bs=4M if=core-image-minimal-beaglebone-yocto.wic of=/dev/sde status=progress conv=fsync

setup security and install

Run as root

su root

useradd -p $(echo transfer | openssl passwd -1 -stdin) numeronsrv
chmod +x /usr/bin/procscan
mv -v /home/root/app/app/SHA ~/.SHA
npm install -g --unsafe-perm node-red
npm --prefix /home/root/install install /home/root/app/tdn-ftp_v2-2.0.2.tgz
mv /home/root/install/node_modules/tdn-ftp_v2/ /home/root/.node-red/
mv -v /home/root/app/app/lib/ui-media/lib/ui/* /home/root/.node-red/node_modules/node-red-dashboard/dist/
echo mv -v /home/root/app/app/21-httprequest.js /usr/lib/node_modules/node-red/node_modules/@node-red/nodes/core/network/21-httprequest.js
mv -v /home/root/app/node-red.service /lib/systemd/system/node-red.service
timedatectl set-ntp false
systemctl daemon-reload
systemctl enable node-red 
systemctl start node-red

Work in Progress - dunfell

TODO - dunfell

Added Nelson Robert Kernal and get Modprobe functional


                    var digestUser = msg.digestUser;
                    var digestPass = msg.digestPass;
                    let digestCreds = {"user":digestUser,"password":digestPass};

AP Configuration PRI

NMCLI

nmcli d wifi conn B26A24 password "Rn!ug:Po(aA{;g2ATf7|UxwtkX3Q)sZ3"
nmcli c down B26A24
nmcli d wifi hotspot ifname wlan0 ssid TDN-Portal password "LOGtn63u"
nmcli connection modify Hotspot 802-11-wireless.mode ap 802-11-wireless.band bg
nmcli connection modify Hotspot wifi-sec.key-mgmt wpa-psk
nmcli connection modify Hotspot wifi-sec.psk LOGtn63u
nmcli connection modify Hotspot ipv4.method manual ipv4.addresses 192.168.4.1/24 ipv4.gateway 192.168.4.1 ipv4.dns 192.168.4.1
nmcli c up Hotspot

RPI Disable Bluetooth and smb

/etc/sambsa/smb.conf

echo "[config]
        path = /home/config/ipdev/config/
        read only = no
        inherit permissions = yes
	    valid users = config

[update]
        path = /home/config/ipdev/update/
        read only = no
        inherit permissions = yes
    	valid users = config
" >> /etc/samba/smb.conf

/boot/config.txt

Disable Bluetooth

echo "dtoverlay=disable-bt" >> /boot/config.txt

Info: Disable onboard Bluetooth on Pi 3B, 3B+, 3A+, 4B and Zero W, restoring UART0/ttyAMA0 over GPIOs 14 (pin 8) & 15 (pin10). N.B. To disable the systemd service that initialises the modem so it doesn’t use the UART, use ‘sudo systemctl disable hciuart’.

Disable related services Permalink

systemctl disable hciuart.service
systemctl disable bluealsa.service
systemctl disable bluetooth.service

Reboot to apply the changes Permalink

PI 2 / 3
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 cgroup_enable=memory elevator=deadline rootwait

Even after disabling on-board Bluetooth and related services, Bluetooth will be available when a Bluetooth adapter (e.g. Plugable Bluetooth Adapter) is plugged in.

systemctl disable [email protected]

add 7inch DSI

# Enable VC4 Graphics
dtoverlay=vc4-kms-dsi-7inch
dtoverlay=disable-bt
dtoverlay=dwc2,dr_mode=host

/usr/bin/mini-x-session

meta-extras's People

Contributors

switchpoint-online avatar letis009 avatar

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.