Sage Pay driver for the Omnipay PHP payment processing library
Omnipay is a framework agnostic, multi-gateway payment processing library for PHP 5.3+. This package implements Sage Pay support for Omnipay. This version only supports PHP 5.4+.
- Omnipay: Sage Pay
- Table of Contents
- Installation
- Basic Usage
- Supported Methods
- Token Billing
- Basket format
- Account Types
- Sage Pay Server Notification Handler
- Support
Omnipay is installed via Composer. To install, simply add it
to your composer.json
file:
{
"require": {
"omnipay/sagepay": "~2.0"
}
}
And run composer to update your dependencies:
$ curl -s http://getcomposer.org/installer | php
$ php composer.phar update
The following gateways are provided by this package:
- SagePay_Direct
- SagePay_Server
For general usage instructions, please see the main Omnipay repository.
Sage Pay Direct is a server-to-server protocol, with all credit card details needing to pass through your application for forwarding on to the gateway. You must be aware of the PCI implications of handling credit card details if using this API.
- authorize() - with completeAuthorize for 3D Secure and PayPal redirect
- purchase() - with completeAuthorize for 3D Secure and PayPal redirect
- createCard() - explicit "standalone" creation of a cardReference or token
Note: PayPal is not implemented in this driver at this time.
This will create a card reference with no authorisation.
If you want to authorise an amount on the card and get a cardReference
for repeated use of the card, then use the authorize()
method with the
createToken
flag set.
Sample code using Sage Pay Direct to create a card reference:
use Omnipay\Omnipay;
use Omnipay\CreditCard;
$gateway = OmniPay::create('SagePay\Direct');
$gateway->setVendor('your-vendor-code');
$gateway->setTestMode(true); // For test account
// The minimal card details to save to the gateway.
// The CVV is optional. However it can be supplied later when
// transactions are being initiated, though that is not advised
// as the CVV will need to go through your site to be added to
// the transaction.
$card = new CreditCard([
'firstName' => 'Joe',
'lastName' => 'Bloggs',
'number' => '4929000000006',
'expiryMonth' => '12',
'expiryYear' => '2020',
'cvv' => '123',
]);
// Send the request.
$request = $gateway->createCard([
'currency' => 'GBP',
'card' => $card,
]);
$response = $request->send();
// There will be no need for any redirect (e.g. 3D Secure), since the
// card is not being authorised at this point.
if ($response->isSuccessful()) {
$cardReference = $response->getCardReference();
// or if you prefer to treat it as a single-use token:
$token = $response->getToken();
}
Sage Pay Server captures any credit card details in forms hosted by the Sage Pay gateway, either by sending the user to the gateway or loading the hosted forms in iframes. This is the preferred and safest API to use.
Sage Pay Server uses your IP address to authenticate backend access to the gateway, and it also needs to a public URL that it can send back-channel notifications to. This makes development on a localhost server difficult.
- authorize()
- purchase()
- acceptNotification() - Notification Handler for authorize, purchase and explicit cardReference registration
- createCard() - explicit "standalone" creation of a cardReference or token
All Sage Pay Server methods start by creating the gateway object, which we
will store in $gateway
here. Note there are no secrets or passwords that need
to be set, as the gateway uses your server's IP address as its main method of
authenticating your application.
The gateway object is minimally created like this:
use Omnipay\Omnipay;
$gateway = OmniPay::create('SagePay\Server');
$gateway->setVendor('your-vendor-code');
$gateway->setTestMode(true); // For a test account
This method authorises a payment against a credit or debit card.
A cardToken
or cardReference
previously captured, can be used here, and only
the user's CVV will be captured, but the overall flow will remain the same.
The $creditCard
object will provide the billing and shipping details:
use Omnipay\Common\CreditCard;
$creditCard = new CreditCard([
'firstName' => 'Joe',
'lastName' => 'Bloggs',
//
'billingAddress1' => 'Billing Address 1',
'billingAddress2' => 'Billing Address 2',
//'billingState' => '',
'billingCity' => 'Billing City',
'billingPostcode' => 'BPOSTC',
'billingCountry' => 'GB',
'billingPhone' => '01234 567 890',
//
'email' => '[email protected]',
'clientIp' => '123.123.123.123',
//
'shippingAddress1' => '99',
'shippingState' => 'NY',
'shippingCity' => 'City1',
'shippingPostcode' => 'SPOSTC',
'shippingCountry' => 'US',
'shippingPhone' => '01234 567 890 SS',
]);
- The country must be a twe-character ISO 3166 code.
- The state will be a two-character ISO code, and is mandatory if the country is "US".
- The state will be ignored if the country is not "US".
- Adddress2 is optional, but all other fields are mandatory.
- The postcode is optional for Republic of Ireland "IE".
- You can use UTF-8. Only joking! This gateway lives on an extended ASCII ISO 8859-1 back end. Really. Do any characterset conversions in your merchant site to avoid surprises.
// Create a unique transaction ID to track this transaction.
$transactionId = {create a unique transaction id};
// Custom surcharges can be added here.
// You must construct the XML string; there is no XML builder in this driver
// at this time. Length is very limited, so keep it compact.
$surchargeXml = '<surcharges>'
. '<surcharge>'
. '<paymentType>VISA</paymentType>'
. '<percentage>5.20</percentage>'
. '</surcharge>'
. '</surcharges>';
// Send the authorize request.
// Some optional parameters are shown commented out.
$response = $gateway->authorize(array(
'amount' => '9.99', // A bargain!
'currency' => 'GBP',
'card' => $card,
'notifyUrl' => 'http://example.com/your/notify.php',
'transactionId' => $transactionId,
'description' => 'Mandatory description',
// 'items' => $items,
// 'cardReference' => '{4E50F334-9D42-9946-2B0B-ED70B2421D48}',
// 'surchargeXml' => $surchargeXml,
// 'token' => $token,
// 'cardReference' => $cardReference,
))->send();
// Create storage for this transaction now, indexed by the transaction ID.
// We will need to access it in the notification handler.
// The reference given by `$response->getTransactionReference()` must be stored.
// Now decide what to do next, based on the response.
if ($response->isSuccessful()) {
// The transaction is complete and successful and no further action is needed.
// This may happen if a cardReference has been supplied, having captured
// the card reference with a CVV and using it for the first time. The CVV will
// only be kept by the gateway for this first authorisation. This also assumes
// 3D Secure is turned off.
} elseif ($response->isRedirect()) {
// Redirect to offsite payment gateway to capture the users credit card
// details.
// If a cardReference was provided, then only the CVV will be asked for.
// 3D Secure will be performed here too, if enabled.
// Once the user is redirected to the gateway, the results will be POSTed
// to the [notification handler](#sage-pay-server-notification-handler).
// The handler will then inform the gateway where to finally return the user
// to on the merchant site.
$response->redirect();
} else {
// Something went wrong; get the message.
// The error may be a simple validation error on the address details.
// Catch those and allow the user to correct the details and submit again.
// This is a particular pain point of Sage Pay Server.
$reason = $response->getMessage();
}
When creating a cardReference, for Sage Pay Server the reference will be available only in the notification callback.
Sample code using Sage Pay Server to create a card reference:
// The transaction ID is used to store the result in the notify callback.
// Create storage for this transaction now, indexed by the transaction ID.
$transactionId = {create a unique transaction id};
$request = $gateway->createCard([
'currency' => 'GBP',
'notifyUrl' => {notify callback URL},
'transactionId' => $transactionId,
'iframe' => true, // TRUE if the offsite form is to go into an iframe
]);
$response = $request->send();
if ($response->isSuccessful()) {
// Should never happen for Sage Pay Server, since the user will always
// be asked to go off-site to enter their credit card details.
} elseif ($response->isRedirect()) {
// Redirect to offsite payment gateway to capture the users credit card
// details. Note that no address details are needed, nor are they captured.
// Here add the $response->getTransactionReference() to the stored transaction,
// as the notification handler will need it for checking the signature of the
// notification it receives.
$response->redirect();
} else {
$reason = $response->getMessage();
}
At this point the user will be redirected to enter their CC details.
The details will be held by the gateway and a token sent to the notification
handler, along with the transactionId
.
The notification handler needs to store the cardReference
or token
referenced by
the transactionId
then acknowledge the acceptance and provide a final URL the user
is taken to.
If using an iframe for the hosted credit card form, then on return to the final redirect URL (provided by the notification handler) it is your site's responsibility to break out of the iframe.
- capture()
- refund()
- abort() - abort an authorization before it is captured
- repeatAuthorize() - new authorization based on past transaction
- repeatPurchase() - new purchase based on past transaction
- void() - void a purchase
- deleteCard() - remove a cardReference or token from the accout
This is one of the simpler messages:
use Omnipay\Omnipay;
use Omnipay\CreditCard;
$gateway = OmniPay::create('SagePay\Direct');
// or
$gateway = OmniPay::create('SagePay\Server');
$gateway->setVendor('your-vendor-code');
$gateway->setTestMode(true); // For test account
// Send the request.
$request = $gateway->deleteCard([
'cardReference' => $cardReference,
]);
$response = $request->send();
// There will be no need for any redirect (e.g. 3D Secure), since no
// authorisation is being done.
if ($response->isSuccessful()) {
$message = $response->getMessage();
// "2017 : Token removed successfully."
}
Sage Pay Server and Direct support the ability to store a credit card detail on the gateway, referenced by a token, for later use or reuse. The token can be single-use, or permanently stored (until its expiry date or explicit removal).
Whether a token is single-use or permanent, depends on how it is used, and not on how it is generated. This is important to understand, and is explained in more detail below.
A token can be generated explicitly, with no authorisation, or it can be generated as a part of a transaction:
$gateway->createCard()
- message used to create a card token explicitly/standalone.$request->setCreateToken()
- transaction option to generate a token with the transaction.
If created explicitly, then a CVV can be provided, and that will be stored against the token until the token is first used to make a payment. If the cardReference is reused after the first payment, then a CVV must be supplied each time (assuming your rules require the CVV to be present). If using Sage Pay Server, then the user will be prompted for a CVV on subsequent uses of the cardReference.
If creating a token
or cardReference
with a transaction, then the CVV will never be
stored against the token.
The transaction response (or notification request for Sage Pay Server) will provide the generated token. This is accessed using:
$response->getToken()
or$response->getCardReference()
These are equivalent since there is no difference in the way tokens or cardRererences are generated.
To use a token with Sage Pay Direct, you must leave the credit card details blank in
the CreditCard
object. Sage Pay Server does not use the credit card details anyway.
To use the token as a single-use token, add it to the transaction request like this:
request->setToken($saved_token);
Once authorised, this token will be deleted by the gateway and so cannot be used again. Note that if the transaction is not authorised, then the token will remain. You should then delete the token explicitly to make sure it does not remain in the gateway (it will sit there until the card expires, maybe for several years).
To use the token as a permanent cardReference, add it to the transaction request like this:
request->setCardReference($saved_token);
This CardReference will remain active on the gateway whether this transaction is authorised or not, so can be used multiple times.
Sagepay currently supports two different formats for sending cart/item information to them:
These are incompatible with each other, and cannot be both sent in the same transaction.
BasketXML is the most recent format, and is the default used by this driver.
Basket is an older format which may be deprecated one day,
but is also the only format currently supported by some of the Sage accounting products
(e.g. Line 50) which can pull transaction data directly from Sage Pay.
For applications that require this type of integration, an optional parameter useOldBasketFormat
with a value of true
can be passed in the driver's initialize()
method.
Your Sage Pay account will use separate merchant accounts for difference transaction sources.
The sources are specified by the accountType
parameter, and take one of three values:
- "E" Omnipay\SagePay\Message\AbstractRequest::ACCOUNT_TYPE_E (default)
For ecommerce transactions, entered in your application by the end user. - "M" Omnipay\SagePay\Message\AbstractRequest::ACCOUNT_TYPE_M
MOTO transactions taken by telephone or postal forms or faxes, entered by an operator. The operator may ask for a CVV when taking a telephone order. - "C" Omnipay\SagePay\Message\AbstractRequest::ACCOUNT_TYPE_C
For repeat transactions, generated by the merchant site without any human intervention.
The "M" MOTO and "C" account types will also disable any 3D-Secure validation that may otherwise be triggered. The "C" account type will disable any CVV requirement.
The "account type" is common across other gateways, but often with different names. Authorize.Net calls it the "business model" and includes "retail" as an option, linking to card machines and hand-held scanners. This is not yet standardised in Omnipay, but there are some moves to do so.
NOTE: The notification handler was previously handled by the SagePay_Server
completeAuthorize
,completePurchase
andcompleteRegistration
methods. The notification handler replaces all of these. The old methods have been left - for the remaining life of OmniPay 2.x - for use in legacy applications. The recomendation is to use the neweracceptNotification
handler now, which is simpler and will be more consistent with other gateways.
The SagePay_Server
gateway uses a notification callback to receive the results of a payment or authorisation.
(Sage Pay Direct does not use the notification handler.)
The URL for the notification handler is set in the authorize or payment message:
// The Server response will be a redirect to the Sage Pay CC form.
// This is a Sage Pay Server Purchase request.
$response = $gateway->purchase(array(
'amount' => '9.99',
'currency' => 'GBP',
'card' => $card, // Just the name and address, NOT CC details.
'notifyUrl' => route('sagepay.server.notify'), // The route to your application's notification handler.
'transactionId' => $transactionId,
'description' => 'test',
'items' => $items,
))->send();
// Before redirecting, save `$response->transactionReference()` in the database, indexed
// by `$transactionId`.
// Note that at this point `transactionReference` is not yet complete for the Server transaction,
// but must be saved in the database for the notification handler to use.
if ($response->isRedirect()) {
// Go to Sage Pay to enter CC details.
// While your user is there, the notification handler will be called.
$response->redirect();
}
Your notification handler needs to do four things:
- Look up the saved transaction in the database to retrieve the
transactionReference
. - Validate the signature of the recieved notification to protect against tampering.
- Update your saved transaction with the results, including the updated - i.e. more complete -
transactionReference
if successful. - Respond to Sage Pay to indicate that you accept the result, reject the result or don't believe the notifcation was valid. Also tell Sage Pay where to send the user next.
This is a back-channel, so has no access to the end user's session.
The acceptNotification gateway is set up simply. The $request
will capture the POST data sent by Sage Pay:
$gateway = OmniPay\OmniPay::create('SagePay_Server');
$gateway->setVendor('your-vendor-name');
$gateway->setTestMode(true); // To access your test account.
$request = $gateway->acceptNotification();
Your original transactionId
is available to look up the transaction in the database:
// Use this transaction ID to look up the `$transactionReference` you saved:
$transactionId = $request->getTransactionId();
Now the signature can be checked:
// The transactionReference contains a one-time token known as the `securitykey` that is
// used in the signature hash. You can alternatively `setSecurityKey('...')` if you saved
// that as a separate field.
$request->setTransactionReference($transactionReference);
// Get the response message ready for returning.
$response = $request->send();
if (! $request->isValid()) {
// Respond to Sage Pay indicating we are not accepting anything about this message.
// You might want to log `$request->getData()` first, for later analysis.
$response->invalid($nextUrl, 'Signature not valid - goodbye');
}
If you were not able to look up the transaction or the transaction is in the wrong state, then indicate this with an error. Note an "error" is to indicate that although the notification appears to be legitimate, you do not accept it or cannot handle it for any reason:
$response->error($nextUrl, 'This transaction does not exist on the system');
Note: it has been observed that the same notification message may be sent by Sage Pay multiple times. If this happens, then return the same response you sent the first time. So if you have confirmed a successful payment, then if you get another identical response for the transaction, then return
confirm()
again.
If you accept the notification, then you can update your local records and let Sage Pay know:
// All raw data - just log it for later analysis:
$request->getData();
// Save the final transactionReference against the transaction in the database. It will
// be needed if you want to capture the payment (for an authorize) or void or refund or
// repeat the payment later.
$finalTransactionReference = $response->getTransactionReference();
// The payment or authorisation result:
// Result is $request::STATUS_COMPLETED, $request::STATUS_PENDING or $request::STATUS_FAILED
$request->getTransactionStatus();
// If you want more detail, look at the raw data. An error message may be found in:
$request->getMessage();
// Now let Sage Pay know you have got it and saved the details away safely:
$response->confirm($nextUrl);
That's it. The $nextUrl
is where you want Sage Pay to send the user to next.
It will often be the same URL whether the transaction was approved or not,
since the result will be safely saved in the database.
If you are having general issues with Omnipay, we suggest posting on Stack Overflow. Be sure to add the omnipay tag so it can be easily found.
If you want to keep up to date with release anouncements, discuss ideas for the project, or ask more detailed questions, there is also a mailing list which you can subscribe to.
If you believe you have found a bug, please report it using the GitHub issue tracker, or better yet, fork the library and submit a pull request.