tangyiyong/xiaomi-pro-hackintosh

macOS Catalina & Mojave & High Sierra on XiaoMi NoteBook Pro 2017 & 2018

XiaoMi NoteBook Pro 2017 & 2018 Hackintosh

macOS Catalina & Mojave & High Sierra on XiaoMi NoteBook Pro 2017 & 2018

English | 中文

Configuration

Specifications	Detail
Computer model	Xiaomi NoteBook Pro 15.6''(MX150/GTX)
Processor	Intel Core i5-8250U/i7-8550U Processor
Memory	8GB/16GB Samsung DDR4 2400MHz
Hard Disk	Samsung NVMe SSD Controller PM961/PM981
Integrated Graphics	Intel UHD Graphics 620
Monitor	BOE NV156FHM-N61 FHD 1920x1080 (15.6 inch)
Sound Card	Realtek ALC298 (layout-id:30/99)
Wireless Card	Intel Wireless 8265
SD Card Reader	Realtek RTS5129/RTS5250S

Current Status in Clover

• Ethernet may not work in macOS 10.15, view #256
• In macOS 10.15, you need to update Wireless-USB-Adapter Driver
  • If you are not using macOS 10.15, it's still recommended to update the driver above
• Discrete graphic card is not working, since macOS doesn't support Optimus technology
  • Have used SSDT-DDGPU to disable it in order to save power
• Fingerprint sensor is not working
  • Have used SSDT-USB to disable it in order to save power
• Intel Bluetooth may cause sleep problems and does not support some Bluetooth devices
  • View Work-Around-with-Bluetooth
• Intel Wi-Fi(Intel Wireless 8265) is not working
  • Have used SSDT-DRP08 to disable it in order to save power
  • Buy a USB Wi-Fi dongle or supported wireless card
  • View #330, some test drivers are provided there
• Realtek USB SD Card Reader(RTS5129) is not working
  • Have used SSDT-USB to disable it in order to save power
• Everything else works well

Current Status in OpenCore

• Basically the same with Current Status in Clover section
• Limited theme
• Software in Windows may lose activation due to different hardware UUID generated by OpenCore
  • I am not sure whether it works or not. According to OpenCore Official Configuration, you can try to inject the original firmware UUID to PlatformInfo - Generic - SystemUUID in /OC/config.plist
• Should Clean NVRAM after using Clover
  • Press Space in OpenCore boot page, and then select Clean NVRAM entry

Need more testing...

Improvements

• Use ALCPlugFix to fix unworking jack after replug
• Use DVMT_and_0xE2_fix to set DVMT to 64mb and unlock CFG
• Use xzhih's one-key-hidpi to improve quality of system UI
  • Support 1440x810 HiDPI resolution
  • On macOS > 10.13.6, to enable higher HiDPI resolution (<1600x900), you need to use DVMT_and_0xE2_fix to set DVMT to 64mb first
• Use one-key-cpufriend to modify CPU power management

Installation

First-time installation

• Please refer to the following installation tutorials
  • Xiaomi Mi Notebook Pro High Sierra 10.13.6
  • Xiaomi Mi Notebook Pro MacOS Catalina Installation Guide || ENGLISH
• or video tutorials
  • Xiaomi NoteBook PRO HACKINTOSH INSTALLATION GUIDE !!!
  • GUIA HACKINTOSH ESPAÑOL 2020 || Instalación de macOS Catalina Xiaomi Mi Notebook Pro
• If the trackpad doesn't work during the installation, please plug a wired mouse or a wireless mouse projector before the installation. After the installation completes, open Terminal.app and run sudo kextcache -i /. Wait for the process ending and restart the device. Enjoy your trackpad!
• Complete EFI packs are available in the releases page.
• Please don't clone or download the master branch for daily use.

Upgrade

• A complete replacement of BOOT and CLOVER(or OC) folders is required. Delete these two folders and copy them from the release pack.
• You can also update Clover EFI by running the following command in Terminal:

bash -c "$(curl -fsSL https://raw.githubusercontent.com/daliansky/XiaoMi-Pro-Hackintosh/master/install.sh)"

FAQ

My touchpad isn't working after update.

You need to rebuild the kext cache after every system update. Use Kext Utility.app or type sudo kextcache -i / in Terminal.app. Then restart. If this still doesn't work, try to press F9.

My screen turns to black and has no response during the updating process.

If you have black screen for five minutes and get no response from the device, please force restart your laptop(Long press power button) and choose Boot macOS Install from ~ entry.

[Clover] My device is locked by Find My Mac and can't be booted, what should I do now?

Press Fn+F11 when you are in Clover boot page. Then Clover will refresh nvram.plist, and lock message should be removed.

[Clover] I opened the FileVault and I can't find macOS partition in Clover boot page, how can I solve it?

It is not recommended to open FileVault. You can press Fn + F3 in the Clover boot page and choose the icon with FileVault. Then you can boot in the system and close FileVault.

[Clover] I can't boot in Windows/Linux by using Clover, but able to boot by press F12 and select OS.

Many people met this problem by using the new version of AptioMemoryFix.efi. A workaround is to delete AptioMemoryFix.efi in /CLOVER/drivers/UEFI/ and replace it with the old version provided in #93.

Also make sure Sandbox and Hyper-V functions in Windows 10 are disabled.

Please refer to detailed FAQ in wiki FAQ.

Changelog

You can view Clover Changelog for detailed information.

A reward

All the project is made for free, but you can reward me if you want.

Wechat	Alipay

Credits

• Thanks to Acidanthera for providing AppleALC, AppleSupportPkg, HibernationFixup, Lilu, NVMeFix, OcBinaryData, OpenCorePkg, VirtualSMC, VoodooInput, VoodooPS2, and WhateverGreen.

• Thanks to alexandred for providing VoodooI2C.

• Thanks to apianti, blackosx, blusseau, dmazar, and slice2009 for providing Clover.

• Thanks to daliansky for providing OC-little.

• Thanks to FallenChromium, jackxuechen, Javmain, johnnync13, Menchen, Pasi-Studio, qeeqez, and Bat.bat for valuable suggestions.

• Thanks to hieplpvip and syscl for providing sample of DSDT patches.

• Thanks to RehabMan for providing EAPD-Codec-Commander, EFICheckDisabler, OS-X-Clover-Laptop-Config, OS-X-Null-Ethernet, and SATA-unsupported.

• Thanks to Sniki for providing OS-X-USB-Inject-All.

• Thanks to zxystd for providing IntelBluetoothFirmware.

• For more detail, please go to Reference page.

Support and discussion

• Mi Notebooks supported by other projects:

  • Mi-Gaming-Laptop by johnnync13
  • Mi-NB-Air-125-6y30 by johnnync13
  • Mi-NB-Air-125-7y30 by influenist
  • Mi-NB-Air-133-Gen1 by johnnync13
  • Mi-NB-Air-133-2018 by johnnync13

• tonymacx86.com:

  • [Guide] Xiaomi Mi Notebook Pro High Sierra 10.13.6

• QQ:

  • 247451054 小米PRO黑苹果高级群
  • 137188006 小米PRO黑苹果
  • 689011732 小米笔记本Pro黑苹果