tearitco / bcompiler Goto Github PK
View Code? Open in Web Editor NEWThis project forked from smtlaissezfaire/bcompiler
Bootstrap compiler
Home Page: http://homepage.ntlworld.com/edmund.grimley-evans/bcompiler.html
This project forked from smtlaissezfaire/bcompiler
Bootstrap compiler
Home Page: http://homepage.ntlworld.com/edmund.grimley-evans/bcompiler.html
Bootstrapping a simple compiler from nothing ============================================ This document describes how I implemented a tiny compiler for a toy programming language somewhat reminiscent of C and Forth. The funny bit is that I implemented the compiler in the language itself without directly using any previously existing software. So I started by writing raw machine code in hexadecimal and then, through a series of bootstrapping steps, gradually made programming easier for myself while implementing better and better "languages". The complete source code for all the stages is in a tar archive: <http://www.rano.org/bcompiler.tar.gz>. This text is the README file from that archive. So, if you are reading this on-line, you can fetch the tar archive and continue off-line, if you prefer. The code only runs on i386-linux, though it would be easy to port it to another operating system on i386, and probably not at all hard to port it to a different architecture. HEX1: the boot loader --------------------- You could input a short program into the memory of an early computer by using switches on its front panel. This short program might then read in a longer program from punched cards. To write a program on punched cards you did not need an editor program, as you could write new cards using an electro-mechanical card punch and manually insert and remove cards from the deck. So, if we were using an early computer, we could really implement a compiler without using any existing software. Unfortunately, a modern PC has neither front panel switches nor a punched card reader, so you need some software running on the machine just to read in a new program. In fact, you probably need some rather complex software running on the machine: just take a look at /usr/src/linux/drivers/block/floppy.c, for example. Since we are doing this on a PC running Linux, we have to define some other starting point. Rather than use the raw hardware, we start with these facilities: - an operating system; - a simple text editor (or we could use Emacs and pretend it's a simple text editor); - a shell that lets us run a program with file descriptors connected to particular files (this way the programs we write only need to read from and write to file descriptors and do not have to know about opening files); - an initial program to convert hexadecimal to binary so that we can compose our first programs in hexadecimal, using the text editor, and then "compile" them to binary in order to run them (this corresponds roughly to the program that you might enter into an early computer using front panel switches). Our initial program is hex1.he (the source in hexadecimal) or hex1 (the binary). If you want to check that hex1 really is the binary corresponding to hex1.he, you can do a hex dump of it: od -Ax -tx1 hex1 If you use hex1 to process hex1.he the result it hex1 again: ./hex1 < hex1.he | diff - hex1 So we can think of hex1 as a trivial bootstrapping compiler for a language called HEX1. Apart from comments and white space, the syntax of HEX1 is /([0-9a-f]{2})*/. Comments start with '#' and continue to the end of the line. The semantics of HEX1 is the semantics of machine code, which is rather complex. Fortunately we can restrict ourselves to a tiny subset of the full instruction set. In hex1.he I have put the corresponding assembler code in comments next to the machine code. The file starts with two ELF headers: a 52-byte file header and a 32-byte program header. It is not necessary to understand all the fields in the ELF header. The most interesting fields are: * e_entry, which specifies where execution should begin. Here it is 0x08048054, which is directly after the ELF headers (labelled _start). * p_vaddr and p_paddr, which specify the target address in memory. Here it is 0x08048000, which is standard for Linux binaries. * p_filesz and p_memsz, which should be set to the length of the file. It seems not to matter if you put a larger number here, and I will make use of that later, though here I have put the correct value. (For more information about ELF do a web search. SCO and Intel have some useful on-line documents.) The code at _start is a loop that reads pairs of hex digits by calling gethex and outputs bytes by calling putchar. Next comes putchar, which uses the "write" system call. Then gethex, which calls getchar and contains a loop for skipping over comments. The ASCII characters [0-9a-f] are converted correctly to the values 0 to 15; everything below '0' (48) is treated as a space and ignored; other characters are misconverted, as there is no error detection. The function getchar uses the "read" system call, and calls "exit" at the end of the file. HEX2: one-character labels -------------------------- Writing machine code in hex is not much fun. The worst part is calculating the addresses for branch, jump and call instructions. Here I am using relative addresses, so I have to recalculate the address every time I change the length of the code between an instruction and its target. It would be no better if I were using absolute addresses: then I would have to change all references to locations after the change. So the first feature I add for my convenience is a function for computing relative addresses. Instead of writing # function: ... e8 cc ff ff ff # call function I will be able to write: .F # function: ... e8 F # call function HEX2 automatically fills in the correct 4-byte relative address. Unfortunately, I still have to use HEX1 to implement the first version of HEX2, so, to keep the implementation simple, I only allow one-character labels and backwards references to them. And there is no error detection for an undefined label. The syntax of HEX2 is ([0-9a-f]{2}|\.L|L)*, where L is any character above 32 apart from [0-9a-f]. The first implementation of HEX2 is hex2a.he. If you compare the ELF headers in hex1.he and hex2a.he you will notice that I have changed p_flags. This is to make the program writable as well as executable. Normal programs consist of several sections, in particular a text section, which contains the program itself, and a data section. The text section is executable, but not writable, and the data section is writable, but not executable. In hex1.he I did not need to write any data to memory, so I only had a text section. In hex2a.he I need to write data to memory, but I can not be bothered with separate sections, so I use a single section which is both executable and writable. There are only two pieces of data: "pos" is a 32-bit counter to keep track of our location as we output the binary, and "label" is a 259-byte table to record the values of the labels. Why 259 bytes? This is because I forgot to multiply by 4. I should have used a table of 256 4-byte values, one for each possible one-character label, and calculated the address as (table + char * 4). Since I forgot to multiply by 4, I only need 259 bytes for my table, and I have to avoid using labels that are close to one another: if I use 'm', then I cannot use 'j', 'k', 'l', 'n', 'o' or 'p'. It would be easy to fix this bug immediately, but it is even easier to work around it for now and fix it a bit later. We can "compile" hex2a.he using hex1: ./hex1 < hex2a.he > hex2a && chmod +x hex2a Since HEX2 is a superset of HEX1, hex2a.he can also compile itself: ./hex2a < hex2a.he | diff - hex2a To test the new facility, I made hex2b.he from hex2a.he by replacing numerical addresses by symbolic ones wherever possible. Compiling hex2b.he gives the same binary as hex2a.he: ./hex2a < hex2b.he | diff - hex2a In hex2c.he I fix the "multiply by 4" bug. It is easier to fix the bug now that I can use labels and do not have to manually modify relative addresses. In hex2c.he I also replace some 1-byte relative addresses by 4-byte relative addresses, so that I can use labels, and I have inserted blocks of NOPs at the end of file to make the precise value of e_entry less critical. We can compile hex2c.he using hex2a/hex2b or using itself: ./hex2a < hex2c.he > hex2c && chmod +x hex2c ./hex2c < hex2c.he | diff - hex2c HEX3: four-character labels and a lot of calls ---------------------------------------------- One-character labels are a bit restrictive, so let us implement four-character labels. If labels have exactly four characters we can store them neatly in 32-bit words! The syntax of HEX3 is /([0-9a-f]{2}|:....|\.....)*/, and now we will introduce some very basic error detection. The compiler can report three different kins of error, which is will do using its exit code: exit code 1: syntax error exit code 2: redefined label exit code 3: undefined label Since it is a single-pass compiler, only backwards references to labels are permitted. The first implementation of HEX3 was hex3a.he, written in HEX2: ./hex2c < hex3a.he > hex3a && chmod +x hex3a It is not possible to compile hex3a.he with hex3a itself, as HEX3 is not compatible with HEX2. I created hex3a.he by making successive small changes to hex2c.he. The system call brk() is used to get memory for an arbitrarily large symbol table. Absolute references to data are avoided by putting a function (.z / get_p) in front of the static data area that returns the address of the following data. Having created hex3a.he, I started work on hex3b.he, an implementation of HEX3 written in HEX3. Initially hex3b.he was just hex3a.he translated to the new syntax, but I then gradually rewrote it to make much greater use of labels and functions. In the final version, after a certain point in the file, everything is done using only these instruction groups: - push a constant onto the stack: 68 XX XX XX XX - call a named function: e8 .LABEL - unconditional jump: e9 .LABEL - conditional branch: 58 85 c0 0f 85 .LABEL - push an address onto the stack: 68 .LABEL e8 .reab The last instruction group consists of a push instruction followed by a call instruction, but the two may not be separated: the function "reab" converts the relative address on the stack to an absolute address by adding its return address and subtracting 5. We can compile hex3b.he using hex3a or itself: ./hex3a < hex3b.he > hex3b && chmod +x hex3b ./hex3b < hex3b.he | diff - hex3b HEX4: any-length labels and implicit calls ------------------------------------------ When implementing hex3b.he we found that it is possible to define all complex functions in terms of simpler functions by using a tiny subset of all the possible machine instructions: branch, call, jump and a few others. In HEX4 we use an even smaller set of instructions and generate those instructions implicitly. In HEX4 there are four types of token: - in-line code or data ('58, '59) - define label (:data, :loop, :func) - instruction: push constant (10, 42) - instruction: push label address (&func, &loop) - instruction: call label address (+, -, jump, branch, func) Tokens must be separated by white space and the type of token is recognised from the first character. Labels can have any length - but we implement them with a simple hash function, so there is a risk of spurious redefined label errors. The jump and branch instruction groups from HEX3 are implemented by functions. A "push label address" instruction must always be followed immediately by a call to one of the functions that can understand a relative address: address, branch, jump. The "address" function (formally "reab") converts the relative address to an absolute address, which can be stored and used later. The predefined functions are: Stack manipulation: drop dup rot pick swap Arithmetic: + - * / % << >> log Comparisons: < <= == != >= > Bitwise logic: & | ^ ~ Memory access: @ = c@ c= Flow of control, using immediate relative address: branch call Flow of control, using stored absolute address: call Address conversion: address Array support: [] []& []= c[] c[]& c[]= Access of arguments and variables: arg arg& arg= var var& var= Function support: enter vars xreturnx xreturn0 xreturn1 Dynamic memory: wsize sbrk / malloc free realloc System calls: exit in out - All operations take arguments and return results to the stack. - Comparisons return 0 or 1. - All data are words, except for c@, c=, c[], c[]&, c[]=, which operate on bytes. - Any user-defined function must start with "enter"; "vars" can be used straight after "enter" to reserve space for N local variables. - To return from a function, use one of the "return" functions. "X Y xreturnx" means return Y values from a function that took X arguments. The most common cases are Y=0 and Y=1, so "X xreturn0" and "X xreturn1" are provided. - Like in C, addresses are byte addresses, so we have to multiply by wsize when allocating memory with sbrk or malloc. - "x y []" is equivalent to "x y wsize * + @" - As always, no forward references to labels are allowed. As with HEX3 there are two implementations of HEX4. The first one, hex4a.he, is written in HEX3. The second one, hex4b.he, is written in HEX4. ./hex3b < hex4a.he > hex4a && chmod +x hex4a ./hex4a < hex4b.he > hex4b && chmod +x hex4b ./hex4b < hex4b.he | diff - hex4b HEX5: structured programming, at last ------------------------------------- HEX5 is more like a real structured programming language. There are no longer any labels; instead there are loops and if...(else)...fi structures. The syntax of HEX5 can no longer be described with a regular expression; instead we need a context-free grammar: program = (hexitem | global | procedure)* hexitem = hexbyte | "_def" symbol hexbyte = /'[0-9a-f][0-9a-f]/ global = "var" symbol | "string" symbol string_literal string_literal = /"([^"]|\\.)*"/ procedure = "def" args name "{" vars body "}" args = symbol* name = symbol vars = "var" symbol body = (number | word | loop | jump | if)* number = /[0-9]+/ word = symbol loop = "{" body "}" jump = "break" | "continue" | "until" | "while" if = "if" body "fi" | "if" body "else" body "fi" symbol = /.+/ except ... Lexical rules: comment = /#[^\n]*\n?/ space = /\s/ string_literal = /"([^"]|\\.)*"/ token = /\S+/ The first implementation of HEX5, written in HEX4, is hex5a.he. This is only a very partial implementation, as it would be quite tedious to implement all of HEX5 in HEX4. In particular, there are not yet any named variables or arguments; access to a function's arguments and local variables is done using the functions from HEX4. Global variables are implemented with a cunning hack: ./hex4b < hex5a.he > hex5a && chmod +x hex5a Next came hex5b.he, which can compile itself, as it is written in a subset of HEX5. In hex5b.he I implemented named arguments and variables: ./hex5a < hex5b.he > hex5b && chmod +x hex5b ./hex5b < hex5b.he | diff - hex5b Then I wanted to start using those features for implementing further features, so I switched to developing hex5c.he, in which I implemented string constants, "while", "until", "return0" and "return1": ./hex5b < hex5c.he > hex5c && chmod +x hex5c BCC: a real language -------------------- All that is needed to turn HEX5 into a tiny structured programming language is to separate off the first part of the source, where there is in-line machine code and the "predefined" and library functions are implemented, into a separate header file. At this point I removed references to "hex" and called the two files "header.bc" and "bcc.bc". These two files are concatenated for compilation: cat header.bc bcc.bc | ./hex5c > bcc && chmod +x bcc Now bcc can compile itself, of course: cat header.bc bcc.bc | ./bcc > bcc2 && chmod +x bcc2 mv bcc2 bcc cat header.bc bcc.bc | ./bcc | diff - bcc Note that the bcc produced by hex5 might not be identical to the bcc produced by bcc itself, as I might make some minor improvements to the code generated by bcc. But the main improvements to be introduced in bcc are: - proper error messages to stderr instead of just exit codes - report undefined symbols - a dynamic buffer for tokens so there is no limit to their length What next? ---------- Here are some things that one might want to do with BCC for one's education and entertainment: - port it to a different operating system or architecture (you could compile to Java byte code, for example) - think of a neater way of handling return values from functions - implement a compile-time check for stack underflow - include a non-bogus implementation of malloc, realloc, free - use an RB-tree for the symbol table so that the compiler does not take time quadratic in the number of symbols - think up a way of using BCC to bootstrap GCC ... Edmund GRIMLEY EVANS <[email protected]>, March 2001 Revised: March 2002
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.