teintuc/avr-template

Fork of hackaday.com avr template

AVR Template

Toolchain

Ubuntu

The AVR toolchain, C libraries, and the avrdude downloader/uploader, can be installed from the Ubuntu repositories:

apt-get install gcc-avr avr-libc avrdude

Building

1. Clone the avr-template repository (or fork it and clone your own repository).

    git clone [email protected]:uctools/avr-template
   

2. Modify the Makefile:

   • Set TARGET to the desired name of the output file (eg: TARGET = main)
   • Set SOURCES to a list of your sources (eg: SOURCES = main.c two.c three.c)
   • Set MCU to the AVR part number to build for (eg: MCU = atmega328p)

   By default, the Makefile will build code for the ATmega328p, which is the microcontroller on the Arduino

3. Run make

4. The output files will be created in the 'build' folder

Flashing

1. Modify the Makefile

• Set PROGRAMMER to your programmer. This will be the -c option for avrdude

• Set PORT to the port your programmer is on. This will be the -P option for avrdude

  By default, the Makefile will flash an Arduino conenected over USB on /dev/usbACM0 using the Arduino bootloader.

2. Run make flash. You may need to run this command as root (sudo make flash) if your user cannot access the port.