kiali is a management console for Istio service mesh. Kiali can be quickly installed as an Istio add-on, or trusted as a part of your production environment.
First, check the Community section on kiali.io, which provides a brief introduction on contributing, how to report issues and request features, and how to reach us.
If you would like to make code contributions, please also check the Contribution Guide.
The target audience of this README are developers. If you are not a developer but want to learn more about Kiali, the Kiali documentation should be more helpful. For instructions on installing Kiali, please read the Installation page.
Read the RELEASING.adoc file.
Note
|
Please, complement the content of this readme document with the README.adoc document of the front-end repository. Although this document has some instructions about building the front-end, they are not complete. |
Make sure you have the following tools:
-
-
Currently, Kiali releases are built using a specific minimum version of Go as declared in the Makefile. Although Kiali may build correctly using other versions of Go, it’s suggested to use the version that the Makefile uses for your own development to ensure replicatable builds.
-
-
-
If you are using
podman
declare the environment variableDORP=podman
.
-
-
NodeJS (Node.js >= 12.22.0 && <16 with the NPM command)
-
The GNU make utility or any of it’s alternatives
Once you have the required developer tools, you can get and build the code with the following script:
# Checkout the source code
mkdir kiali_sources
cd kiali_sources
export KIALI_SOURCES=$(pwd)
git clone https://github.com/kiali/kiali.git
git clone https://github.com/kiali/kiali-operator.git
git clone https://github.com/kiali/helm-charts.git
ln -s $KIALI_SOURCES/kiali-operator kiali/operator
# Build the back-end and run the tests
cd $KIALI_SOURCES/kiali
make build test
# You can pass go test flags through the GO_TEST_FLAGS env var
# make -e GO_TEST_FLAGS="-race -v -run=\"TestCanConnectToIstiodReachable\"" test
# Build the front-end and run the tests
make build-ui-test
Note
|
The rest of this README assumes the directory tree created by the previous commands: |
-- kiali_sources |- kiali |- kiali-operator \- helm-charts
Since Kiali is a management console for an Istio-based service mesh, you will need an Istio-like Service Mesh to try Kiali. Then, Istio Meshes are installed on Kubernetes clusters.
We provide a few unsupported scripts that can help to get started:
-
You can use the
crc-openshift.sh
script to create an OpenShift cluster on your local machine. -
If you are familiar to minikube, you may try the
k8s-minikube.sh
script. It has the option to install Dex which is useful if you want to test with OpenID. -
Finally, the
install-istio-via-istioctl.sh
and theinstall-bookinfo-demo.sh
scripts can assist into installing Istio and the Bookinfo sample application in your cluster, respectively. You can try running these scripts without any arguments.
These scripts are written to rely on the minimum dependencies as possible and will try to download any required tools.
You can also use kind, however we don’t have a script to create a kind cluster.
Depending on the type of cluster you are using, you should define the CLUSTER_TYPE
environment variable on your shell to openshift
(this is the default if not set), minikube
or kind
value so that the Makefiles can assist in other operations. If you are not using any of these clusters, you should set the environment variable to CLUSTER_TYPE=local
.
Note
|
If you are using minikube it’s recommended that you enable the registry and ingress add-on. The k8s-minikube.sh script should do this for you.
|
Note
|
If you are using docker and using minikube’s registry add-on or any custom non-secure registry, make sure the Docker daemon is properly configured to use your registry.
|
Assuming that:
-
you have successfully built the back-end and the front-end,
-
you also have created a Kubernetes cluster with an Istio-based Service Mesh installed on it,
-
and you are not using the
CLUSTER_TYPE=local
environment variable
the following commands should deploy a development build of Kiali to the cluster:
cd $KIALI_SOURCES/kiali
# Build the Kiali-server and Kiali-operator container images and push them to the cluster
make cluster-push
# If you want to only build and push the Kiali-server container images:
# make cluster-push-kiali
# If you want to only build and push the Kiali-operator container images:
# make cluster-push-operator
# Deploy the operator to the cluster
make operator-create
# Create a KialCR to instruct the operator to deploy Kiali
make kiali-create
If you are using the CLUSTER_TYPE=local
environment variable, you will need to declare some additional environment variables to set the container registry where container images should be pushed and use make container-push*
targets instead of cluster-push*
targets. For example, if your container registry is localhost:5000
:
export QUAY_NAME=localhost:5000/kiali/kiali
export CONTAINER_NAME=localhost:5000/kiali/kiali
export OPERATOR_QUAY_NAME=localhost:5000/kiali/kiali-operator
export OPERATOR_CONTAINER_NAME=localhost:5000/kiali/kiali-operator
cd $KIALI_SOURCES/kiali
# Build the Kiali-server and Kiali-operator container images and push them to the cluster
make container-build container-push
# If you want to only build and push the Kiali-server container images:
# make container-build-kiali container-push-kiali-quay
# If you want to only build and push the Kiali-operator container images:
# make container-build-operator container-push-operator-quay
# Deploy the operator to the cluster
make operator-create
# Create a KialCR to instruct the operator to deploy Kiali
make kiali-create
If you already have Kiali installed and you want to recreate the kiali server pod, you can run the following command:
cd $KIALI_SOURCES/kiali
make kiali-reload-image
This is to facilitate development. To quickly build a new Kiali container image and load it to the cluster, you can run:
cd $KIALI_SOURCES/kiali/frontend
yarn && yarn build
cd $KIALI_SOURCES/kiali
make clean build cluster-push-kiali kiali-reload-image
Note
|
There is no equivalent reload command for the operator. You would need to manually reload the operator via kubectl or oc commands.
|
cd $KIALI_SOURCES/kiali
# Delete the Kiali CR to let the operator remove Kiali.
make kiali-delete
# If the previous command never ends, the following command forces removal by bypassing the operator
# make kiali-purge
# Remove the operator
# NOTE: After this completes, the `kiali-create` and `kiali-delete` targets will be ineffective
# until you run the `operator-create` target to re-deploy the Kiali operator again.
make operator-delete
If you are changing the back-end code of Kiali, before submitting a pull request make sure your changes are properly formatted and no new linting issues are introduced by running:
# CD to the back-end source code
cd $KIALI_SOURCES/kiali
# Install linting tools
make lint-install
# Format the code and run linters
make format lint
Kiali itself is instrumented with opentelemetry tracing to help provide insights and surface performance issues for the kiali server. To enable, set the server.observability.tracing.enabled
and server.observability.tracing.collector_url
configuration options.
apiVersion: kiali.io/v1alpha1
kind: Kiali
metadata:
name: kiali
spec:
...
server:
observability:
tracing:
collector_url: http://jaeger-collector.istio-system:14268/api/traces
enabled: true
...
You may want to run Kiali outside of any cluster environment for debugging purposes. To do this, you
will want to use the run-kiali.sh hack script located in the
hack directory. See the --help
output for the options you can set.
The default configuration it uses is found in the config template file
also located in the hack
directory. Read the comments at the tops of both files for more details.
cd $KIALI_SOURCES/kiali/hack
./run-kiali.sh
Integration testing is done with cypress. More information can be found here.
Requirements: - Istio - Kiali - bookinfo demo app - error rates demo app
You can use this script to install all the neccessary demo apps for testing. The script supports both openshift and non-openshift deployments.
# If you are doing frontend development, start the frontend development server, where `<kiali-url>` is the URL to the base Kiali UI location such as `http://localhost:20001/kiali`:
make -e YARN_START_URL=http://<kiali-url> yarn-start
# Start the cypress tests. The tests will run against the frontend development server by default.
# Otherwise you can pass a custom url with env vars:
#
# make -e CYPRESS_BASE_URL=http://<kiali-url> cypress-gui
make cypress-gui
Note that make cypress-gui
runs the Cypress GUI that allows you to pick which individual tests to run. To run the entire test suite in headless mode, use the make target cypress-run
instead.
If you are using VisualStudio Code, you can install the following launcher.json
that is then used to launch the Kiali Server in the debugger. Run the hack/run-kiali.sh
script first to ensure the proper services are up (such as the Prometheus port-forward proxy).
{
// To use this, first run "hack/run-kiali.sh --tmp-root-dir $HOME/tmp --enable-server false"
// Pass in --help to that hack script for details on more options.
"version": "0.2.0",
"configurations": [
{
"name": "Launch Kiali to use hack script services",
"type": "go",
"request": "launch",
"mode": "debug",
"program": "${workspaceRoot}/kiali.go",
"cwd": "${env:HOME}/tmp/run-kiali",
"args": ["-config", "${env:HOME}/tmp/run-kiali/run-kiali-config.yaml"],
"env": {
"KUBERNETES_SERVICE_HOST": "127.0.0.1",
"KUBERNETES_SERVICE_PORT": "8001",
"LOG_LEVEL": "trace"
}
}
]
}
Many configuration settings can optionally be set within the Kiali Operator custom resource (CR) file. See this example Kiali CR file that has all the configuration settings documented.
If you want to embed Kiali in other applications, Kiali offers a simple feature called Kiosk mode. In this mode, Kiali won’t show the main header, nor the main navigation bar.
To enable Kiosk mode, you only need to add a kiosk=<platform_id>
URL parameter. You will need to use the full path of the page you want to embed. For example, assuming that you access Kiali through HTTPS:
-
To embed the Overview page, use
https://kiali_path/overview?kiosk=console
. -
To embed the Graph page, use
https://kiali_path/graph/namespaces?kiosk=console
. -
To embed the Applications list page, use
https://kiali_path/applications?kiosk=console
.
If the page you want to embed uses other URL arguments, you can specify any of them to preset options. For example, if you want to embed the graph of the bookinfo namespace, use the following URL: http://kiali_path/graph/namespaces?namespaces=bookinfo&kiosk=console
.
<platform_id>
value in the kiosk
URL parameter will be used in future use cases to add conditional logic on embedded use cases, for now, any non empty value will enable the kiosk mode.
If you have Grafana installed in a custom way that is not easily auto-detectable by Kiali, you need to change in the Kiali CR the value of the grafana > url
apiVersion: kiali.io/v1alpha1
kind: Kiali
metadata:
name: kiali
spec:
...
external_services:
grafana:
url: http://grafana-istio-system.127.0.0.1.nip.io
...
When developing the Kiali UI you will find it useful to run it outside of the cluster to make it easier to update the UI code and see the changes without having to re-deploy. The preferred approach for this is to use the proxy feature of React. The process is described here. Alternatively, you can use the make -e YARN_START_URL=<url> yarn-start
command where <url>
is to the Kiali backend.
In the provided OpenShift templates, SSL is turned on by default. If you want to turn it off, you should:
-
Remove the "tls: termination: reencrypt" option from the Kiali route
-
Remove the "identity" block, with certificate paths, from the Kiali Config Map.
-
Optionally you can also remove the annotation "service.beta.openshift.io/serving-cert-secret-name" in the Kiali Service, and the related
kiali-cabundle
volume that is declared and mounted in Kiali Deployment (but if you don’t, they will just be ignored).
The operator will create a Route or Ingress by default (see the Kiali CR setting "deployment.ingress_enabled"). If you want to expose Kiali via Istio itself, you can create Gateway, Virtual Service, and Destination Rule resources similar to below:
---
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
name: kiali-gateway
namespace: istio-system
spec:
selector:
istio: ingressgateway
servers:
- port:
number: 80
name: http-kiali
protocol: HTTP
# https://istio.io/latest/docs/reference/config/networking/gateway/#ServerTLSSettings
tls:
httpsRedirect: false
hosts: [<your-host>]
- port:
number: 443
name: https-kiali
protocol: HTTPS
tls: {}
hosts: [<your-host>]
...
---
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
name: kiali-virtualservice
namespace: istio-system
spec:
gateways:
- kiali-gateway
hosts: [<your-host>]
http:
- route:
- destination:
host: kiali.istio-system.svc.cluster.local
port:
number: 20001
weight: 100
...
---
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
name: kiali-destinationrule
namespace: istio-system
spec:
host: kiali
trafficPolicy:
tls:
mode: DISABLE
...
Note
|
The "Central IstioD" setup is currently named "Primary-remote" multi-cluster setup. |
Warning
|
When this support was incorporated into Kiali, the "Central IstioD" setup of Istio was in an early development phase. These instructions are probably now broken. |
There are certain use cases where Kiali needs to be deployed in one cluster (Control Plane) and observe a different cluster (Data Plane).
Follow these steps:
1: You should have the Istio with an External Control Plane setup running
2: Create the Kiali ClusterRole, ClusterRoleBinding, and ServiceAccount in the Data Plane cluster
3: Create a remote secret in the Control Plane, using the Data Plane ServiceAccount you just created. This allows the Control Plane to read from and modify the Data Plane
istioctl x create-remote-secret --service-account kiali-service-account --context=$DataPlane --name kiali | kubectl apply -n istio-system --context=$ControlPlane -f -
4: You will now run Kiali in the Control Plane. You need to add the remote secret to the Kiali Deployment by specifying a Volume and VolumeMount. When Kiali sees /kiali-remote-secret/kiali it will use the remote cluster’s API server instead of the local API server
spec:
template:
spec:
containers:
- volumeMounts:
- mountPath: /kiali-remote-secret
name: kiali-remote-secret
volumes:
- name: kiali-remote-secret
secret:
defaultMode: 420
optional: true
secretName: istio-remote-secret-kiali
5: Kiali now needs the Istio metrics from the sidecars. You need to run Prometheus in the Control Plane and have it scrape the metrics from an envoyMetricsService. These metrics are required.
6: Kiali in the Control Plane should now be fully functional with the Data Plane