thejml/gotek_cf_tray

This is an OpenSCAD render of a custom 5.25" drive tray which holds a CompactFlash Adapter and the Gotek Floppy Emulator board

GoTek 5.25" Bay with CompactFlash slot

This is an OpenSCAD render of a custom 5.25" drive tray which holds a CompactFlash Adapter and the Gotek Floppy Emulator board. The intention was to take full advantage of FlashFloppy's enhancements to the Gotek Floppy Emulator (specifically, a rotary encoder for selection and OLED screen for information) and make a CF adpater accessible for easy removal on my RetroPC project.

Features

• A slot for inserting and removing CF Cards from an ACS brand CF-to-IDE flash adapter
• A spot to mount a FlashFloppy enhanced Gotek Floppy Emulator
• A window sized for 0.96" OLED screen that connects to a FlashFloppy enhanced Gotek Floppy Emulator
• A rotary encoder for connecting to a FlashFloppy enhanced Gotek Floppy Emulator

Tools used to render

• Cura Slicer v4.7.1+
• OpenSCAD v2019.5+

Parts

• Gotek Floppy Emulator - https://www.amazon.com/gp/product/B0762NCHC6
• 0.96" Dual color OLED display - https://www.amazon.com/gp/product/B072Q2X2LL
• Rotary encoder - https://www.amazon.com/gp/product/B07DM2YMT4
• ACS-CF-IDEToCFA - http://www.acscontrol.com/pdf/Products/CF/IDEtoCF/Acs-CF-IDEToCFA.pdf
• 3D Printer of your choice

Software to update a Gotek floppy emulator

• FlashFloppy Gotek Firmware - https://github.com/keirf/FlashFloppy
• HxCFloppyEmulator software - https://hxc2001.com/download/floppy_drive_emulator/index.html#stm32hxc