theofficialflow / h-encore Goto Github PK
View Code? Open in Web Editor NEWFully chained kernel exploit for the PS Vita on firmwares 3.65-3.68
License: MIT License
Fully chained kernel exploit for the PS Vita on firmwares 3.65-3.68
License: MIT License
Unsure if this is the intended functionality. If you try to download Vitashell with flight mode enabled, it throws error 0x80412112. If only Wifi is disabled, it asks to enable wifi.
If this is intended functionality, or cannot be worked around, a possible enhancement could be to substitute the vague error message with a request to disable airplane mode and retry.
PSV2000
Use PSV MemoryCard to Install h-encore , it is ok.
Remove PSV MemoryCard , Resstart PSV, Now it is use Inside Stroage.
I want ReInstall again, but ,can not transfer to PSV.
It get the error You can only copy applications that your account is the owner of.
I think , When installed HENkaku, this issue will show.
please make a key for Hacked.
a key for No Hacked.
After I install vitashell and adrenaline, my cursor always goes up, ingame, i reinstall again even i restore the system and it didn't worked. can you help me please?
help pls. i cannot continue to install h encore. i follow all the steps correctly and repeated many times
Are you able to help in anyway? Thank you for your time!!
The h-encore bootstrap works fine. I can install the Vitashell but wen i install HENkaku they say success then i go to the settings and the HENkaku menu dind't exist so i go back to h-encore and reset the taiHEN config.txt and try to reinstall the HENkaku but it's always the same. How i can fix that? By the way i had install HENkaku befor at the firmware 3.60
As soon as I attempt to transfer h-encore, QCMA crashes and the transfer fails.
Can anyone help me I'm Following all steps correctly and Repeated it 3 Times The Result still the same got an error code C1-2783-0 while launching H-encore app on my Vita
vita is shutting off when installing henkaku from h-encore is there a fix for this? 3.68 vita Thank you~
I know this sounds off-topic, but my i ask how I'm i able to swap my 4gb(sony mmc) to 32gb(sony mmc) on Ps Vita slim 3.65 enso..Please forgive me for my ignorance I'm just newbie to this..
Qcma download for Mac is not working. "This is not the page your looking for"
Can I install h-encore if there is no account in vita? I think vita creates some kind of temp. account. And just in case I changed guest name from user969 to fkusony
in Getting rid of the trophy warning 2
“Launch VitaShell and navigate to ux0:user/savedata/00” ==>>
“Launch VitaShell and navigate to ux0:user/00/savedata”
Think you very much!
Hello, i did everything like the tutorial said, and i am getting the error code C0-9250-6, i did the whole process 3 times checking every bit carefully, but it still fails with the same error, telling me to reinstall the app from the Playstation Store. I am running OFW 3.68 without prior mods.
//Edit: Also, if its important, i am using the Wifi Only OLED Vita (PCH-1004)
I've followed the instructions from top to bottom twice and on both attempts received the following error after answering 'Yes' to the trophy message:
Cannot start this application. You must download the application again from [Download List] in [PS Store]. (C0-11136-2)
Original PSVita with 3.65 firmware.
Hello,I have tried connecting the PSVITA to the PC through the USB and WIFI but I keep getting errors I am running 3.67
Just installed the h-encore for 3.68 on a psvita fat and I keep getting gpu crashes all the time, it's happening randomly even when Im on the shell. Any idea on how to solve?
This is not a forum to ask noob questions.
So basically this is happening. Music is not working every time H-Encore is installed, if I reboot the Vita without installing H-Encore it playbacks normally, however, the moment I reinstall H-Encore, it wouldn't simply play.
Haven't tested with Videos tho, although music is more important, we can use it while playing, so I hope this gets fixed with some sort of app or plugin.
Thanks!
I just did everything normally and when it nearly finished it gave me this error
I successfully launched h-encore bubble and was at the point where I finished installing henkaku and vitashell. I selected "exit" and pressed circle. The screen went black and a few seconds later, vita powered off automatically. Any help here?
Thanks!
Updated plugins GAMESD.skprx but no luck... sd2vita adapter is working fine but memory card is not being detected.
i get the error message of "0x80af5025"
is there a way to fix this
I've been trying to transfer h-encore over to my vita for two days now.
I did everything by tutorial several times, no luck.
Same with auto h-encore, the same error when i try to transfer.
Every step before that was fine, but no matter what it doesn't want to transfer.
Neither wi-fi nor usb transfers work.
My official firmware version is 6.68, and Vita itself is an old fat 3G+Wi-fi version.
I also tried rebuilding the database and formatting several times, still no luck.
Its rare but sometimes when open h-encore app the screen goes black and restart device.
maybe it should increase the success rate to exploit
Hi,
First, big big thanks to TheFlow for the hard work and release - it's a lot of work and appreciation definitely needs to be given.
Second, just thought of sharing a couple of issues I encountered post H-encore installation, related to games I installed. Probably something to do with the backups themselves or the way I installed them, but thought I would share anyway to contribute to the knowledge in this community.
Am running Vita on 3.65 with no Enso.
Installed a game using Maidump, was straightforward install without additional patches etc, game itself works perfectly fine. However, if I leave the console in sleep mode midway while playing the game, and when I come back to it - I also switch windows in order to connect my bluetooth headset before returning to the game - then the game suddenly cannot detect my vita memory card - none of the saved games are visible and if I try to save a new slot it says "memory card cannot be found". Restarting the console, running Henkaku again and then starting the game up fixes this issue (unless I do above steps again!).
Separately, another 2 games I installed (one using Maidump with patches and another using NoNpDrm) - they were initially working when i first installed, a few days later suddenly both are unable to start and both showed the same error message:
Cannot start this application. You must download the application again from [Download List] in [PS Store]. (C0-11136-2)
Incidentally (don't know if related) this issue happened after issue (1) above occurred.
Thanks! I am more curious on what the issues could be and to understand more rather than desperately wanting to solve it :)
So i followed all the steps but when i install HENkaku and vita shell, the mollecular Shell Bubble is missing. anything i can change to fix this?
Hi Mr flow
Thanks for your work
I can install h-encore app in my vita
But I can't download vita shell and show error
Hello dear, through this channel, I would like to report that I have practically tried everything to be able to copy the h-encore application in my PSVITA console, for which, after 11 seconds of finishing the copy, it generates the error C0-11274 -5.
I have even turned off and on, and I have also applied clean contacts to the memory card.
I did all the steps to the letter. I have firmware version 3.68, the same one that appears in the youtube video.
Link: https://www.youtube.com/watch?v=0Uv2Xhel3CU
Which may be?
cannot start this application. you must download this application again from [Download List] in [PS Store]. (C0-9249-4)
System turns off after entering sleep mode following rapidly flashing blue PS button AFTER running h-encore and installing HENkaku. This happens even if the system is plugged into power source. Tapping the power button does not wake the system and I must boot the device back up by holding down the power button as normal.
If I do not run h-encore and install HENkaku after reboot, the system does not turn off during sleep mode.
I never experienced this issue until using this exploit. I am on FW version 3.67.
h-encore ps vita 3.68 when installing plugin storagemgr.skprx music does not work
So i did my initial test restarted my vita and put it into sleep mode without installing henkaku for 30min. And went back to it and it was still in sleep state no problem. Now i did my second test installed henkaku and put my ps vita to sleep and only just after 5 mins the vita shutdown and i have to do cold boot again.
I have done something weird, and for whatever reason, my vita displays as 3.65, but says it's on the latest version and can even connect online without henkaku. According to vitaident, my vita has a firm ver of 3.65, but a sys ver of 3.68. If the enso installer is incompatible, will it just give an error, or cause irreversible damage?
I got the the Error message "Failed! 0x8041013D", right after "Downloading eboot.bin". (FW 3.65)
C0-9250-6 when launching h-encore, must download application again from the PS Store
Sorry if that was already asked, but i dont find anything to do with this folder "ux0_temp_game_PCSG90096_app_PCSG90096"
does it's used by psvimg? the README doesn't say a thing about that.
Thx
thank you
i did everything from start to step 8 but didn't get this step , i got key and installed psvimgtool.
i am using Windows 7
Change directory to the h-encore folder in terminal and use the key to encrypt all folders using:
psvimg-create -n app -K YOUR_KEY app PCSG90096/app
psvimg-create -n appmeta -K YOUR_KEY appmeta PCSG90096/appmeta
psvimg-create -n license -K YOUR_KEY license PCSG90096/license
psvimg-create -n savedata -K YOUR_KEY savedata PCSG90096/savedata
Should I choose "PS Vita -> PC" instead because AID hasn't been created. Since there's no AID on PC, there's nothing happening. Did I do anything wrong?
Update: I actually created the folder before and forgot about it
After a full powercycle vita runs a database check and removes h-encore bubble.
This makes it a tethered back as you have to connect to qcma and install the game/bullbe again.
When the app is started and Exit
is chosen, the expoit is installed regardless. As an end-user, _ expected the application to close without doing anything. There is an Install HENkaku
option there too, you know.
As you can see in the picture below, the C2-12848-3 error occurs, this happens because of an existitng henkaku issue which has not been fixed in h-encore either. The details as to why this problem occurs are detailed in the issue below:
Hey.. Please give me advice...
I have already run command psvimg-create and get file X.psvimg and X.psvmd, but the size of file X.psvimg is around 243 Mb..
So size of H-encore bubble when I want copy to my PS Vita is about 900 Mb..
Please give me advice what should I do.. Thanks
The file is corrupt. I already do it 3 times same as your tutorial but nothing happens it only shows that.
I am on 3.68
I have succesfully downloaded hencore and have have the henkaku settings but when i downloaded vitashell and try to open it the error C2-12828-4 appears. It would not even let me open vitashell.
It's been over 1 month since h-encore descended from the heavens to grant us the miracle of Vita hacking. The best part is that so far (knock on wood), SONY has yet to release another firmware to break this. Considering that last time, they released 3.61 10 days after Henkaku came out, that's pretty good. Then again, that was 2016 where the Vita still had some life in it, now it's almost all but dead, even in Japan.
I was on 3.65 enso.
I decided to update to 3.68 and I used the FWUpdater app. I ran into this issue and after following the instructions I was able to update to 3.68.
So far so good...
After launching h-encore and installing henkaku my settings app does not list "Henkaku Settings" where the "System Update" option is. It also lists my FW as 3.67 after h-encore is enabled. Before it's enabled my vita reports that it's on 3.68.
This isn't affecting the hack; homebrew continues to work as it should, but it is strange behavior that I haven't seen mentioned anywhere yet.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.