ioBroker.robonect

Tests: Linux/Mac: Windows:

This is an ioBroker adapter for your Robonect HX enabled lawn mower. It has been tested with Robonect v1.1b (with ZeroConf v1.4) and a Gardena R70Li.

Settings

It is required to enter the IP address of the Robonect module. In case username and password are set, they are required, too.
ioBroker.robonect polls data at different intervals: By default status information is polled every 60 seconds (1 minute) and other information is polled every 900 seconds (15 minutes).
It is possible to configure two rest periods to prevent polling e.g. at noon and during the night. Information that can be polled without waking the lawn mower (and make it beep) will still be polled.
For every API request it is possible to choose the polling interval (status or info) or don't poll at all.

Control

Mode

The mode of the lawn mower can be controlled by changing robonect.0.status.mode. Possible modes are "Auto", "Home", "Manual", "End of day" and "Job" (not fully implemented at the moment).

Extensions

It is possible to control the extensions GPIO 1, GPIO 2, OUT 1 and OUT 2 of the Robonect module. Requirement is that the mode of the extension is configured as "API" via the Robonect Web-UI. If for example LEDs are connected to OUT1, it is possible to switch them on in the night and off in the morning by setting Robonect.0.extension.out1.status to "true" or "false".

Changelog

0.1.4

(braindead1) changed polling log level from info to debug
(braindead1) implemented polling of garage door status

0.1.3

(braindead1) implemented JsonLogic & refactoring

0.1.2

(braindead1) fixed GPS

0.1.1

(braindead1) fixed typo

0.1.0

(braindead1) implemented rest times

0.0.12

(braindead1) improved polling

0.0.11

(braindead1) implemented weather and GPS polls

0.0.10

(braindead1) first stable version

0.0.9

(braindead1) adapter improvements

0.0.8

(braindead1) fixed some issues caused by different configurations

0.0.7

(braindead1) prepared adapter for latest repository

0.0.6

(braindead1) fixed minor issues

0.0.5

(braindead1) updated to work with Robonect HX version 1.1b

0.0.4

(braindead1) updated to work with Robonect HX version 1.0 Beta5

0.0.3

(braindead1) support of Admin3

0.0.2

(braindead1) updated to work with Robonect HX version 1.0 Beta2

0.0.1

(StefSign) initial commit

License

The MIT License (MIT)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

thost96 / iobroker.robonect Goto Github PK