Topic: rpm-measure Goto Github

👇 Here are 2 public repositories matching this topic...

khoih-prog / esp32_new_timerinterrupt
rpm-measure,This library enables you to use Interrupt from Hardware Timers on an ESP32, ESP32_S2, ESP32_S3 or ESP32_C3-based board. It now supports 16 ISR-based timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware timers, using interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's necessary if you need to measure some data requiring better accuracy.
User: khoih-prog
esp32 isr accuracy non-blocking timers interrupt timer-interrupt mission-critical hardware-timers timerinterrupt

khoih-prog / esp32_s2_timerinterrupt
rpm-measure,This library enables you to use Interrupt from Hardware Timers on an ESP32-S2-based board. These ESP32-S2 Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
User: khoih-prog
accuracy esp32 esp32-s2 espressif hardware-timers interrupt isr mission-critical non-blocking rpm-measure