Topic: stm32g Goto Github

👇 Here are 3 public repositories matching this topic...

khoih-prog / flashstorage_stm32
stm32g,The FlashStorage_STM32 library aims to provide a convenient way to store and retrieve user's data using the non-volatile flash memory of STM32F/L/H/G/WB/MP1. It's using the buffered read and write to minimize the access to Flash. It now supports writing and reading the whole object, not just byte-and-byte. New STM32 core v2.0.0 is also supported now. Useful if the EEPROM is not available or too small. Currently, STM32F/L/H/G/WB/MP1 are supported.
User: khoih-prog
data eeprom emulated-eeprom flash flash-storage flashstorage-stm32 samd stm32 stm32f stm32g stm32h stm32h7 stm32l stm32mp1 stm32wb storage

khoih-prog / stm32_pwm
stm32g,This wrapper library enables you to use Hardware-based PWM on STM32F/L/H/G/WB/MP1 boards to create and output PWM to pins. The most important feature is they're purely hardware-based PWM channels. Therefore, their executions are very precise and not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware PWM channels still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other ISR-based or software-based PWM using millis() or micros(). That's necessary if you need to measure some data requiring very high frequency and much better accuracy. PWM feature can now be used.
User: khoih-prog
isr pwm pwm-driver non-blocking hardware-pwm stm32 duty-cycle pwm-frequency multi-channel-pwm hardware-based-pwm

khoih-prog / stm32_slow_pwm
stm32g,This library enables you to use Hardware Timers on STM32F/L/H/G/WB/MP1 boards to create and output PWM to pins. The most important feature is they're purely hardware-based PWM channels. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware timers, using interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's necessary if you need to measure some data requiring better accuracy. PWM feature can now be used. Max PWM frequency is limited at 1000Hz
User: khoih-prog
stm32 isr pwm pwm-driver duty-cycle timer-interrupt hardware-timer isr-based isr-based-pmw multi-channel-pwm