trisp3ar/cyberdeck

Welcome to the trisp3ar GitHub

With the uprising of open-source technologies, I like to contribute and support the communnity as best as I can and put my skills to good use.

Main Focus

• Embedded Development
• ⚡💀⚡ Electronic Warefare and Civillian Capability made public and available to everyone
• Provide support in any way possible
• 🌱 I’m currently learning RF with focus on digital protocols and the intricacies of black magic

Current Projects:

• 👀 Something undisclosed with themal
• 🐴 helping out JustCallMeKoko with the ESP32-Marauder, my Fork

Future Projects:

• Open source reconnaissance UAS
• Open source active aiming laser/light illuminator
• Open source rangefinder for precision rifles and DMR platforms (like Wilcox RAPTAR-S)
• Open source universal encryption module for AES-256 encryption of voice audio implemented on an FPGA platform (ref. Paper A lightweight AES algorithm implementation for encrypting voice messages using field programmable gate arrays

cyberdeck's Issues

CAD Model

Interfaces

Interfaces are devided into:

Power Supply in/out

• USB Typ C PD in/out
• Banana Jack 12 VDC in

BUS

• 3 x USB 3.0 Type A
• 1 x USB 3.0 Type C

Audio

• 3.5 mm

Video

• HDMI

Data storage

• SD-Card
• SATA connector analyzer

RF

• SMA GPS
• SMA LoRa
• SMA HackRF One RF
• SMA HackRF One CLK in
• SMA HackRF One CLK out

Hardware and Architecture

Case: PeliCase 1200

Components

	Component	Model	Interface
sourced acquired	Battery	CHARMAST 26800MAH ULTRA SLIM	Input: 1 x Micro USB, 1 x Lightning Output: 3 x USB-A Input/Output: 1 x USB-C
sourced acquired	Computer	Raspberry Pi 4 Model B	USB-C, 2 x USB-A 2.0, 2 x USB-A 3.0, 2 x Micro-HDMI, 3.5 mm
sourced acquired	Harddrive		USB A 3.0
sourced acquired	Front Panel Interface	IB-HUB1417-i3	USB 3.0, SATA PWR
sourced acquired	Keyboard	KSK-5031IN	USB A 2.0
sourced acquired	Display	Waveshare 10.1"	HDMI, Micro-USB PWR
sourced acquired	USB-Hub	Delock USB 2.0 Extender Hub 4 Port	USB A 2.0
sourced acquired	RF	LoRa 32	USB-A 2.0
sourced acquired	RF	HackRF One	USB-A 2.0
sourced acquired	RF	NEO-M8N Module	UART
sourced acquired	Cooling	Fan	GPIO
sourced acquired	DC/DC 12 V/5 V (15 W)	CPT C1205003	Input: 12 V Output: 2 x USB PWR 5 V
sourced acquired	RF	WiFi Pinapple Nano	USB-A 2.0

Cables

	Cable	Model	Interconnection	Interface
sourced acquired	PWR		PWR Bank - RasPi	USB-C/USB-C
sourced acquired	PWR		PWR Bank - Display	USB-A/Micro-USB
sourced acquired	PWR		PWR Bank - int. USB Hub	USB-A/Barrel
sourced acquired	PWR		PWR Bank - ext. USB Hub	USB-A / USB-A
sourced acquired	Front-Panel-PWR
sourced acquired
sourced acquired	Video			Micro-HDMI / HDMI
sourced acquired	Audio			3.5 mm
sourced acquired	SMA-Extender			SMA male
sourced acquired

Switches

	Switch	Model	Interconnection
sourced acquired	Main-PWR-I	MS 500R	RasPi, Display, int. HUB
sourced acquired	Main-PWR-II	MS 500N
sourced acquired	SW1	Display	1901
sourced acquired	SW2	Ext. HUB	1901.1103
sourced acquired	SW3	HackRF One	1901.1103
sourced acquired	SW4	LoRa32	1901.1103
sourced acquired	SW5	GPS	1901.1103
sourced acquired	SW6	WiFi Pineapple Nano	1901.1103
sourced acquired	SW7

Connectors

Top-Bottom-Interconnection:

• Keyboard (USB 2.0): 4 -> 3
• PWR-RasPi: 2 -> 1
• PWR-int. HUB: 2 -> 1
• PWR-ext. HUB: 2 -> 1

• GND

Total: 10
Opt.: 6

HF-SMA:

Delock

RJ-45 / Network

Delock 85124

Power consumption calculations

• Raspberry Pi 4 B: 5 V, 3 A / 15 W
• Display: 3 A @ 5 V
• Tastatur:
• HackRF One: 500 mA @ 5 V
• TTGO LoRa32: 120 mA
• Festplatte: ?
  - Verstärker:

estimate:
4 x 3 A + 3 A = 15 A