trulyspinach/sonos-fenway

Everything we know about Fenway

sonos-fenway's Issues

NAND maybe fried

Hi, I've a Sonos Play:3 and i got uboot shell through UART
I think that NAND is fried because it give me a lot of sequential error and no boot

Machine check in kernel mode.
Caused by (from msr): regs 03f18c18 Unknown values in msr
NIP: 03FAAF24 XER: 20000000 LR: 03FA905C REGS: 03f18c18 TRAP: 0200 DAR: 00000000
MSR: 0000b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00

GPR00: 03FD2598 03F18D08 00000080 00000005 03FF93DE 00000000 03F18CF0 03FE7128
GPR08: 03FE93F8 03FA907Machine check in kernel mode.
Caused by (from Machine check in kernel mode.
Caused by (from msr): regs 03f187a8 Unknown values in msr
NIP: 03FAAEE4 XER: 20000000 LR: 03FA91E8 REGS: 03f187a8 TRAP: 0200 DAR: 00000000
MSR: 00003002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00

GPMachMachine check in kernel mode.
Caused by (from msr): regs 03f18338 Unknown values in msr
NIP: 03FAAEE4 XER: 20000000 LR: 03FA91E8 REGS: 03f18338 TRAP: 0200 DAR: 00000000
MSR: 00003002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00

Using ptable this is the output:

=> ptable
Default Partition Table
Partition Table, magic 653503e4, flags 00000000
partition-0: type 2, start 0, blocks 16
partition-1: type 16, start 16, blocks 192
partition-2: type 17, start 208, blocks 640
partition-3: type 64, start 848, blocks 2288
partition-4: type 16, start 3136, blocks 192
partition-5: type 17, start 3328, blocks 640

but when i try to upgrade it returns

=> upgrade partition-0 rootfs.gz
unknown destination partition-0
exit not allowed from main input shell.

I don't know if i'm wrong with somethings or actually the NAND is fried and the partitions are "fake partition"

With a view to bypassing the NAND i've tried to boot with tftpboot but it's expecting an .img file
I've tried renaming .upd file but obviously isn't the same as .img file

=> tftpboot
*** Warning: no boot file name; using '0101FEA9.img'
Using eTSEC1 device
TFTP from server 169.254.2.2; our IP address is 169.254.1.1
Filename '0101FEA9.img'.
Load address: 0x200000
Loading: #################################################################
         #################################################################
         #######checksum bad

So, the question is: somewhere there is a .img file that i can use to tftpboot or something that can i do if i replace the NAND with a new one?

Thanks a lot