range-based for loop add-ons inspired by the Python builtins and itertools library. Like itertools and the Python3 builtins, this library uses lazy evaluation wherever possible.
Note: Everthing is inside the iter namespace.
range
enumerate
zip
imap
filter
filterfalse
unique_everseen
unique_justseen
takewhile
dropwhile
cycle
groupby
accumulate
compress
chain
chain.from_iterable
reversed
slice
sliding_window
grouper
product
combinations
permutations
powerset
Uses an underlying iterator to acheive the same effect of the python range
function. range can be used in three different ways:
Only the stopping point is provided. Prints 0 1 2 3 4 5 6 7 8 9
for (auto i : range(10)) {
cout << i << '\n';
}The start and stop are both provided. Prints 10 11 12 13 14
for (auto i : range(10, 15)) {
cout << i << '\n';
}The start, stop, and step are all provided. Prints 20 22 24 26 28
for (auto i : range(20, 30, 2)) {
cout << i << '\n';
}Negative values are allowed as well. Prints 2 1 0 -1 -2
for (auto i : range(2, -3, -1)) {
cout << i << '\n';
}In addition to normal integer range operations, doubles and other numeric types are supported through the template
Prints: 5.0 5.5 6.0 ... 9.5
for(auto i : range(5.0, 10.0, 0.5)) {
cout << i << '\n';
}Can be used with any class with an iterator. Continually "yields" containers similar to pairs. They are basic structs with a .index and a .element. Usage appears as:
vector<int> vec{2, 4, 6, 8};
for (auto e : enumerate(vec)) {
cout << e.index
<< ": "
<< e.element
<< '\n';
}Called as filter(predicate, iterable). The predicate can be any callable.
filter will only yield values that are true under the predicate.
Prints values greater than 4: 5 6 7 8
vector<int> vec{1, 5, 4, 0, 6, 7, 3, 0, 2, 8, 3, 2, 1};
for (auto i : filter([] (int i) { return i > 4; }, vec)) {
cout << i <<'\n';
}
If no predicate is passed, the elements themselves are tested for truth
Prints only non-zero values.
for(auto i : filter(vec)) {
cout << i << '\n';
}Similar to filter, but only prints values that are false under the predicate.
Prints values not greater than 4: 1 4 3 2 3 2 1
vector<int> vec{1, 5, 4, 0, 6, 7, 3, 0, 2, 8, 3, 2, 1};
for (auto i : filterfalse([] (int i) { return i > 4; }, vec)) {
cout << i <<'\n';
}
If no predicate is passed, the elements themselves are tested for truth.
Prints only zero values.
for(auto i : filterfalse(vec)) {
cout << i << '\n';
}This is a filter adaptor that only generates values that have never been seen
before. For this algo to work your object must be specialized for std::hash
otherwise it will not be very efficient
Example Usage:
std::vector<int> v {1,2,3,4,3,2,1,5,6,7,7,8,9,8,9,6};
for (auto i : unique_everseen(v)) {
std::cout << i << " ";
}std::cout << std::endl; Another filter adaptor that only prevents duplicates that are in a row, if the
sequence is sorted it will work exactly the same as unique_justseen, in that
case it will be better and more efficient to use.
Example Usage:
std::vector<int> v {1,1,1,2,2,4,4,5,6,7,8,8,8,8,9,9};
for (auto i : unique_justseen(v)) {
std::cout << i << " ";
}std::cout << std::endl; Yields elements from an iterable until the first element that is false under the predicate is encountered.
Prints 1 2 3 4. (5 is false under the predicate)
vector<int> ivec{1, 2, 3, 4, 5, 6, 7, 6, 5, 4, 3, 2, 1};
for (auto i : takewhile([] (int i) {return i < 5;}, ivec)) {
cout << i << '\n';
}Yields all elements after and including the first element that is false under the predicate.
Prints 5 6 7 1 2
vector<int> ivec{1, 2, 3, 4, 5, 6, 7, 1, 2};
for (auto i : dropwhile([] (int i) {return i < 5;}, ivec)) {
cout << i << '\n';
}Repeatedly produce all values of an iterable. The loop will be infinite, so a
break is necessary to exit.
Prints 1 2 3 repeatedly until some_condition is true
vector<int> vec{1, 2, 3};
for (auto i : cycle(vec)) {
cout << i << '\n';
if (some_condition) {
break;
}
}Separate an iterable into groups sharing a common key. The following example creates a new group whenever a string of a different length is encountered.
vector<string> vec = {
"hi", "ab", "ho",
"abc", "def",
"abcde", "efghi"
};
for (auto gb : groupby(vec, [] (const string &s) {return s.length(); })) {
cout << "key: " << gb.first << '\n';
cout << "content: ";
for (auto s : gb.second) {
cout << s << " ";
}
cout << '\n';
}Note: Just like Python's itertools.groupby, this doesn't do any sorting.
It just iterates through, making a new group each time there is a key change.
Thus, if the the group is unsorted, the same key may appear multiple times.
Differs from std::accumulate (which in my humble opinion should be named
std::reduce or std::foldl). It is similar to a functional reduce where one
can see all of the intermediate results. By default, it keeps a running sum.
Prints: 1 3 6 10 15
for (auto i : accumulate(range(1, 6))) {
cout << i << '\n';
}A second, optional argument may provide an alternative binary function
to compute results. The following example multiplies the numbers, rather
than adding them.
Prints: 1 2 6 24 120
for (auto i : accumulate(range(1, 6), std::multiplies<int>{})) {
cout << i << '\n';
}Note: The intermediate result type must support default construction and assignment.
Takes an arbitrary number of ranges of different types and efficiently iterates over them in parallel (so an iterator to each container is incremented simultaneously). When you dereference an iterator to "zipped" range you get a tuple of whatever elements the iterators were holding.
Example usage:
array<int,4> i{{1,2,3,4}};
vector<float> f{1.2,1.4,12.3,4.5,9.9};
vector<string> s{"i","like","apples","alot","dude"};
array<double,5> d{{1.2,1.2,1.2,1.2,1.2}};
for (auto e : zip(i,f,s,d)) {
cout << std::get<0>(e) << ' '
<< std::get<1>(e) << ' '
<< std::get<2>(e) << ' '
<< std::get<3>(e) << '\n';
std::get<1>(e)=2.2f; // modify the float array
}a zip_longest also exists where the range terminates on the longest
range instead of the shortest. because of that you have to return a
boost::optional<T> where T is whatever type the iterator dereferenced
to (std::optional when it is released, if ever)
Takes a function and one or more iterables. The number of iterables must match the number of arguments to the function. Applies the function to each element (or elements) in the iterable(s). Terminates on the shortest sequence.
Prints the squares of the numbers in vec: 1 4 9 16 25
vector<int> vec{1, 2, 3, 4, 5};
for (auto i : imap([] (int x) {return x * x;}, vec)) {
cout << i << '\n';
}With more than one sequence, the below adds corresponding elements from
each vector together, printing 11 23 35 47 59 71
vector<int> vec1{1, 3, 5, 7, 9, 11};
vector<int> vec2{10, 20, 30, 40, 50, 60};
for (auto i : imap([] (int x, int y) { return x + y; }, vec1, vec2)) {
cout << i << '\n';
}Note: The name imap is chosen to prevent confusion/collision with
std::map, and because it is more related to itertools.imap than
the python builtin map.
Yields only the values corresponding to true in the selectors iterable. Terminates on the shortest sequence.
Prints 2 6
vector<int> ivec{1, 2, 3, 4, 5, 6};
vector<bool> bvec{false, true, false, false, false, true};
for (auto i : compress(ivec, bvec) {
cout << i << '\n';
}This can chain any set of ranges together as long as their iterators dereference to the same type.
vector<int> empty{};
vector<int> vec1{1,2,3,4,5,6};
array<int,4> arr1{{7,8,9,10}};
for (auto i : chain(empty,vec1,arr1)) {
cout << i << '\n';
}Similar to chain, but rather than taking a variadic number of iterables, it takes an iterable of iterables and chains the contained iterables together. A simple example is shown below using a vector of vectors to represent a 2d ragged array, and prints it in row-major order.
vector<vector<int>> matrix = {
{1, 2, 3},
{4, 5},
{6, 8, 9, 10, 11, 12}
};
for (auto i : chain.from_iterable(matrix)) {
cout << i << '\n';
}Iterates over elements of a sequence in reverse order.
for (auto i : reversed(a)) {
cout << i << '\n';
}Returns selected elements from a range, parameters are start, stop and step. the range returned is [start,stop) where you only take every step element
This outputs 0 3 6 9 12
vector<int> a{0,1,2,3,4,5,6,7,8,9,10,11,12,13};
for (auto i : slice(a,0,15,3)) {
cout << i << '\n';
}Takes a section from a range and increments the whole section.
Example:
[1, 2, 3, 4, 5, 6, 7, 8, 9]
take a section of size 4, output is:
1 2 3 4
2 3 4 5
3 4 5 6
4 5 6 7
5 6 7 8
6 7 8 9
Example Usage:
std::vector<int> v = {1,2,3,4,5,6,7,8,9};
for (auto sec : sliding_window(v,4)) {
for (auto i : sec) {
std::cout << i << " ";
i.get() = 90;
//has to be accessed with get if you want to store references
//because it is stored in a reference_wrapper (std::vector
//cannot hold references)
}
std::cout << std::endl;
}grouper is very similar to sliding window, except instead of the section sliding by only 1 it goes the length of the full section.
Example usage:
std::vector<int> v {1,2,3,4,5,6,7,8,9};
for (auto sec : grouper(v,4))
//each section will have 4 elements
//except the last one may be cut short
{
for (auto i : sec) {
std::cout << i << " ";
i.get() *= 2;
}
std::cout << std::endl;
} Generates the cartesian project of the given ranges put together
Example usage:
std::vector<int> v1{1,2,3};
std::vector<int> v2{7,8};
std::vector<std::string> v3{"the","cat"};
std::vector<std::string> v4{"hi","what","up","dude"};
for (auto t : product(v1,v2,v3,v4)) {
std::cout << std::get<0>(t) << ", "
<< std::get<1>(t) << ", "
<< std::get<2>(t) << ", "
<< std::get<3>(t) << std::endl;
} Generates n length unique sequences of the input range, there is also a combinations_with_replacement
Example usage:
std::vector<int> v = {1,2,3,4,5};
for (auto i : combinations(v,3)) {
//std::cout << i << std::endl;
for (auto j : i ) std::cout << j << " ";
std::cout<<std::endl;
}Generates all the permutations of a range using std::next_permutation
Example usage:
std::vector<int> v = {1,2,3,4,5};
for (auto vec : permutations(v)) {
for (auto i : vec) {
std::cout << i << " ";
}
std::cout << std::endl;
} Generates every possible subset of a set, never run it since it runs in ๐ฏ(2^n).
Example usage:
std::vector<int> vec {1,2,3,4,5,6,7,8,9};
for (auto v : powerset(vec)) {
for (auto i : v) std::cout << i << " ";
std::cout << std::endl;
}
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent