twinone/rubik-robot

Rubik's Cube solver robot

rubik-robot

A low cost, 3D printable Rubik's Cube solving robot. This project was built in about two or three weeks, incuding the hardware design, software, etc. Just printing and assembling it should take about two days, so you can do it in a weekend. The total cost of the project is about 45$, from which 35$ are for the non-printable hardware, and 10$ are the actual printed parts.

Hardware used

• 3D Printer (BQ Prusa i3 Hephestos)
• An Android phone (OnePlus One)
• 4x micro servo (TowerPro MG 995)
• 4x servo (Tower Pro SG 90)
• Arduino Nano, breadboard, jumper wires, etc.
• Bluetooth module (HC-05)
• M3 screws / nuts

Parts

• OpenSCAD designs for the printable parts (see scad/).
• The sketch that runs on the Arduino (see arduino/).
• An Android application (see android/) that uses the camera and works in cooperation with the Arduino to scan and solve the cube automatically.
• Standalone utility apps (see utils/) for talking to the Arduino.

Make your own

See BUILDING.md

Authors

• @twinone
• @jmendeth

License

Everything is MIT-licensed (see LICENSE) except this README and the documentation files under docs, which are under a Creative Commons Attribution-NonCommercial 4.0 International License.

rubik-robot's Issues

Servo designation and orientation

Which servo in the servo list corresponds to each physical servo? How does one orient the servos when first setting up the robot (what degree 0-180 corresponds to what position for each type of servo)?

Android APK

Android studio does not compile apk...

I tried different versions.

Can u send me a compiled app. please?

TY very much