ummmme/setup_cdh

CDH5.16.2 离线安装脚本

setup_cdh's Issues

运行检查master的ip与本机ip一样。但是说应该在master上运行。逻辑有问题？

[root@m1 install]# ifconfig
ens192: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.83.45 netmask 25xxxxx5.0 broadcast 1xxxxxx255
inet6 2001:250:5xxxxx:3xxxxxx56:c245:a271 prefixlen 64 scopeid 0x0
inet6 fe80::9xxxxxxxxxxxx3d prefixlen 64 scopeid 0x20
ether 00:50:56:94:97:48 txqueuelen 1000 (Ethernet)
RX packets 6109722 bytes 8806729682 (8.2 GiB)
RX errors 0 dropped 5 overruns 0 frame 0
TX packets 2670507 bytes 5253109254 (4.8 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1 (Local Loopback)
RX packets 702615 bytes 5027600513 (4.6 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 702615 bytes 5027600513 (4.6 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

[root@m1 install]# hostname
m1
[root@m1 install]# vim /etc/hosts
[root@m1 install]# vim /etc/hostname
[root@m1 install]# chmod 777 ./*
[root@m1 install]# sh installcdhmeta.sh
checking system...
checking ip...
, exit.Script must be run in master machine. try run this script on 192.168.83.45
[root@m1 install]# sh installcdhmeta.sh
checking system...
checking ip...
, exit.Script must be run in master machine. try run this script on 192.168.83.45