mash's Introduction

mash Coin

Shell script to install a Mash Masternode on a Linux server running Ubuntu 16.04. Use it on your own risk.

Installation:

wget -q https://raw.githubusercontent.com/Visco33/mash/master/mash.sh
bash mash.sh

Desktop wallet setup

After the MN is up and running, you need to configure the desktop wallet accordingly. Here are the steps for Windows Wallet

Open the mash Coin Desktop Wallet.
Go to RECEIVE and create a New Address: MN1
Send 10000 mash to MN1.
Wait for 15 confirmations.
Go to Help -> "Debug Window"
Type the following command: masternode outputs
Go to ** Tools -> "Open Masternode Configuration File"
Add the following entry:

Alias Address Privkey TxHash Output_index

Alias: MN1
Address: VPS_IP:PORT
Privkey: Masternode Private Key
TxHash: First value from Step 6
Output index: Second value from Step 6

Save and close the file.
Go to Masternode Tab. If you tab is not shown, please enable it from: Settings - Options - Wallet - Show Masternodes Tab
Click Update status to see your node. If it is not shown, close the wallet and start it again.
Click Start All
If you are not able to see your Masternode, try to close and open your desktop wallet.

Usage:

mash-cli mnsync status
mash-cli getinfo
mash-cli masternode status

Also, if you want to check/start/stop mash , run one of the following commands as root:

systemctl status mash #To check the service is running.
systemctl start mash #To start mash service.
systemctl stop mash #To stop mash service.
systemctl is-enabled mash #To check whether or not the mash service is enabled on boot or not.

Recommend Projects