Some scripts and data for bluenet.
- Python (only tested on 2.7)
- Matplotlib
- NumPy
Usage:
./currentcurvepeaks.py -f data/power/current-curve.txt
File names include the type of hardware, and the mac address. Then there are several keywords used:
Keyword | Explanation |
---|---|
NW | Means the load was N Watt. |
setup | Means that the data starts with the crownstone in setup mode, then gets setuped, then goes boots in normal mode. |
phone | Means a phone was held close to the crownstone, in order to see the interference. Usually only waves above some threshold were captured. |
no-diff | Means the ADC was in single ended mode instead of differential mode. |
zero-ref | Means the zero ref pin was sampled instead of the current sense pin. |
gnd | Means some unused pin, with pull down, was sampled instead of the current sense pin. |
every N ms | Means every N ms a wave was captured. |