vospascal/pedal-arduino

Arduino simracing pedals with gui calibration loadcell analog ADS

pedal-arduino's Issues

Load cell ADC issue

Hi,
I have issue when connecting load cell via amp made with LM324 as ins.op.amp. I changes inputs to ADC but with ADC1115 it is not working. When configured as analog input works but digital not. During calibration I notice that throttle is working and it is super sensitive and brake is showing movement but it is out of calibration range.
I'm using beam load cell YZC-1B.
Please can you help me with this issue, I assume that I need to change something more in code but I'm not familiar with Arduino coding.
Thank you
BR

@attached I'm sending pedals picture. Pedals are made in my garage with hand tools!!!

Remaining pins as buttons

By default the Pedalbox controller does not have any active buttons. When enabling one or more buttons in Pedals.h and uploading to the board, after loading the board is no longer detected. Is there no way to use the other pins on the Arduino Pro Micro or Leonardo for buttons? Should I consider the Arduino Pedalbox exclusively for pedals?

Can I use Arduino Leonardo?

I actually use the board Leonardo, but I can´t connect with PedalFX.exe. Idk why, I tried edit the boards.txt bu isn´t work. I can use only with pedal-gui-web.

PCB project

Part, I really like this design. Is pcb design for electronics available? If so I would like to get it

DIY User Guide

Hi - amazing work vospascal.

I had been searching for this exact calibration software for my DIY Arduino pedal box.

My pedal box setup uses modified Logitech G27 pedals into an Arduino Pro Micro .

The install process is quite straightforward and only requires that you have the Arduino IDE installed.

The README provides the text which must be added to the Arduino boards "library".

You can find this here;
C: > Program Files > Arduino > Hardware > AVR > boards.txt

Be sure to Enable all permissions for the Arduino Folder in Windows otherwise the file will not save

This MUST but done in order for the GUI software to detect the Arduino Pro Micro correctly.

Next, we can open the Arduino sketch "pedaal.ino".

When it comes time to upload - potentially changing any input pins in the sketch to match your wiring we must select the correct board in the Arduino IDE software.

In the Arduino IDE Software > Tools > Boards > Select "PedalBox"

Ensure your Arduino board is connected to the correct COM Port and then upload the sketch.

Once this is uploaded you have the option to view pedal input data via the Serial Monitor within Arduino IDE.

If all is well, we can close Arduino IDE and open the PedalFX application and calibrate our pedal range / deadzones and pedal curves.

You may have to recalibrate your pedals in your game - but the PedalFX will save the pedal profile to the Arduino for desired use

Windows Not detectin input

Hi is this project still active?

I quite like it however I'm unable to get Windows to detect the input of the device.

The app detects the inputs

I'm using an Arduino Leanardo with an ADS 1115

Would like to add compatibility for software to upload curves to different boards.

Access to the source code of the application would allow this.

Load Cell Interface LC-USB 16-bit

Hi.
It's possible to make it work with Leo Bodnar board? Thanks.

Change smooth values

Hello.
first, thank you for your amazing projekt. I have a hx711 loadcell break and a throttle with hall sensor (stock fanatec csl pedal). The analog signal from the hallsensor is disturbed from around 70%. Is there an option to set the smoothsparameters?

greets nelson

having issues with assetto corsa compatitione

seems my pedal acts badly with assetto corsa compatitione it dosent register braking with load cell work very well in other game but appears intermittant in acc. anyone else have this issue