Item | Description |
---|---|
Printer | Kywoo3D Tycoon Max |
Board (MCU) | Kywoo v1.4 (MKS Robin Nano v3 based) |
Klipper Board | BIGTECHTREE CM4 + PI4B Adapter |
- Enter klipper firmware configuration:
> cd ~/klipper
> make menuconfig
-
Set parameters as on Firmware section and save;
-
Build the new bin file through make command:
> make
- Run the fix script for mks boards and move the result file to configuration folder:
> ./scripts/update_mks_robin.py out/klipper.bin out/Robin_nano35.bin
> cp out/Robin_nano35.bin ~/printer_data/config/
>
- Download the bin file from Moonrake interface and follow the instructions on Kywoo site to flash it.