vulgo/prime-b460i-plus-hackintosh

macOS 14 Sonoma on B460i-PLUS + OpenCore

prime-b460i-plus-hackintosh's Issues

ACPI aml and Bluetooth receiver

@vulgo
Regarding the ACPI aml files I had a "stupid" idea yesterday to copy your ACPI aml files from the repo in my EFI which made the hackintosh unbootable. I had to create another bootable USB stick to go into recovery mode, mount the EFI and restore the old aml files from a backup that I had.

The question. The repo's AML files are not for this board? I cannot use them?
I only have SSDT-AWAC.aml, SSDT-EC.aml, SSDT-PLUG.aml and SSDT-USBX.aml... you have more...

Regarding bluetooth. I have an ASUS USB-BT400. I think now in Monterey I have also the BlueTool.kext...
Anyway, if I have my bluetooth sony wh-1000xm3 connected to it and I am just like 30cm away from the dongle, if I turn my head the signal it's lost and the music shutters due to poor signal.

The question. Is this just a bad/unsupported bluetooth dongle or something that has to do with the USBs. I ordered a new m.2 card which has both Wireless and BT hopefully it will help.

Any feedback from your experience is appreciated... :)

Info.plist is missing

Tried this EFI for exactly the same motherboard but get the following error during boot:
Plist Kexts\VirtualSMC.kext\Contents\Plugins\SMProcessor.kext\Contents\Info.plist is missing for injected kext VirtualSMC.kext\Contents\Plugins\SMProcessor.kext (VirtualSMC.kext CPU Monitor Plugin)
NVRAM was reset.

Ventura and updating OpenCore

The version of OpenCore in this repository should be updated to a more recent release. I need to read the OC manual and potentially update to Ventura, then I'll update here following Acidanthera's release

Ordered the same board

Hi,

I ordered yesterday the same board after looking at your repository. How are u getting along with it? Is it ok?

After reading the open core documentation what I understood is that the only issue with this board are the messy USBs, did you face any other issues?

Thanks.

Monterey

Hi @vulgo,

Just to let you know that I updated to Monterey without any issues.
Your monitor fix works fine with Monterey.

My ASUS BT400 needs the BluetoothFix.kext...on Big Sur it was working without anything.

Other than that I do not see any problems...

Sleep Issues

Hi @vulgo,

I wanted to ask if sleep works for you? For me only the monitors go to sleep but not the PC.

iGPU: Booting with DP + HDMI multi-monitor results in graphics failure at login window

HDMI (FB1) shows garbage after EFI, DisplayPort (FB0, boot display) shows login window but goes offline after a short time. After reconnecting either monitor both displays seem to work correctly.

iGPU/WEG device properties

Hopefully these match the hardware and have clean effects.

Connectors

Platform ID: 0x3E9B007

Index	Bus ID	Pipe	Type	Flags
1	0x05	9	DP	0x000003C7
2	0x04	10	HDMI	0x000003C7

• Connector at Index 1 is unchanged
• Index 2 Type DP -> HDMI

Device Properties

<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
<dict>
	<key>AAPL,ig-platform-id</key>
	<data>BwCbPg==</data>
	<key>AAPL,GfxYTile</key>
	<data>AQAAAA==</data>	
	<key>framebuffer-patch-enable</key>
	<data>AQAAAA==</data>
	<key>framebuffer-pipecount</key>
	<data>AgAAAA==</data>
	<key>framebuffer-portcount</key>
	<data>AgAAAA==</data>
	<key>framebuffer-memorycount</key>
	<data>AgAAAA==</data>
	<key>framebuffer-unifiedmem</key>
	<data>AAAAgA==</data>
	<key>framebuffer-con1-enable</key>
	<data>AQAAAA==</data>
	<key>framebuffer-con1-type</key>
	<data>AAgAAA==</data>
	<key>force-online</key>
	<data>AQAAAA==</data>
	<key>force-online-framebuffers</key>
	<data>AgAAAA==</data>
</dict>

• AAPL,GfxYTile property
• framebuffer-pipecount = 2
• framebuffer-portcount = 2
• framebuffer-memorycount = 2
• framebuffer-unifiedmem = 2048 MB
• framebuffer-con1-type = HDMI
• force-online property may replace igfxonln=1 boot argument
• force-online-framebuffers = 0x02000000

Ventura

Hi @vulgo ,

Shall I update to Ventura? I will backup everything if things go sideways, will find a way to restore, maybe. :)

New 0.8.5 hang

I there, first want to thanks again for your work on prime B460i, greatly appreciated!

I wanted to test the new mac os 13 and decided to create a new USB key using your latest 0.8.5 release, yet even after nvram flash, adjusting the GPU and generic/Serial number section in config, tried both the provided USB kext or a newly generated kext from my working Monterey setup: I can't make neither my Monterey boot nor the Ventura install to start.

Before I download debug version and start a new setup wanted to know if you had anything special done, it seems you're using the AMD video card, have you tried or any advice on the usage of iGPU ?

Thanks for any tips to debug.