w2pa/thetis-2.9.0-ramdor

A modified version of the 2.9.0 TAPR release of Thetis by MW0LGE

NOTE

My distro is in a state of flux whilst I work on multi-meters, and may not actually build or run as expected. The releases section contains source that will run/compile. I am using this a dumping ground at the moment for a backup in-case something untoward happens.

If you do manage to get it to compile, and want to look at the meters, then you will need some images from the link below. Expand the zip to the AppData\Roaming\OpenHPSDR folder, so that a Meters folder sits along side the Skins folder.

https://www.dropbox.com/s/fod4orxt75lualz/Meters.zip?dl=1

I will update this note when everything has settled. Richie.

Latest Release v2.9.0 April 03, 2022

2.9.0 (2022-03-04)

See Thetis Change Log for more details.

2.8.11 (2020-20-10)

See Thetis Change Log for more details.

2.8.9 (2020-13-10)

See Thetis Change Log for more details.

2.8.8 (2020-10-10)

See Thetis Change Log for more details.

2.8.7 (2020-10-7)

See Thetis Change Log for more details.

2.8.6 (2020-10-6)

See Thetis Change Log for more details.

2.7.0 Not Officially Released

2.6.9 (2020-1-24)

See Thetis Change Log for more details.

2.6.8 (2019-11-3)

See Thetis Change Log for more details.

2.6.7 (2019-4-29)

• fixed bug where the VOX/DEXP LookAhead feature was enabled when VOX/DEXP was not.
• corrected compatiblity issue with the ANAN-10E. This requires new firmare to be flashed. v10.3
• corrected the Spectrum and Histogram diplay during transmit

2.6.6 (2019-4-21)

• corrects issue with EU region using commas
• corrects issue with having out of band frequency on startup
• fixed transmit filter not being displayed when using split

2.6.5 (2019-4-18)

• corrected issue with console remaining open after exiting Thetis
• fixed problem of program crashing when recording while transmitting
• fixed problem with program crashing when receiving a bad packet

2.6.4 (2019-4-13)

• improved VOX/DEXP features and performance

• QSK cabibility for the ANAN-200D, 7000DLE, and 8000DLE models

• fixed VAC1 startup problem

• fixed VAC2 resampler problem

• added option to use VAC2 on split

• improved TX-RX and RX-TX transistion on voice modes

• transverter T/R relay bug fixed

• added control for BYPS-EXT1-XVTR RX ANT for 7000DLE

  • see "Release Notes for 2-6-4.docx" for detailed information.

2.6.0 (2018-4-10)

• added diagnostic LED array
• divided open collector controls into 3 groups (HF-VHF-SWL)
• bug fix for step tune using MIDI

2.5.9 (2018-3-29)

• changed "MDECAY" constant to 0.99 in netInterface.c
• added 2Hz step tune choice
• corrected duplicate db import dialogs
• modified behavior of sequence errors so that sequence errors are ignored for seq 0
• changes to VAC includes tooltips for various controls, fix for the Output Ringbuffer latency Monitor control not working, and added the ability to reset the diagnostics
• forced BPF1 into ByPass during transmit if PureSignal is enabled for Orion MkII boards only

2.5.8 (2018-3-25)

• changed "MDECAY" constant to 0.9 in netInterface.c
• fixes for VFO A&B Lock
• NB/NB2 is turned OFF while transmitting when DUP is enabled
• Added 2kHz Tune Step
• Changed ANF behavior so that it is disabled when in CW mode
• Removed the 750Hz CW filter and added a 150Hz CW filter
• Increased display buffer to support larger than 4k displays

2.5.7 (2018-3-25)

• spectrum roll-off adjusted to clip 4%
• calls to PeakFwdPower(…) and PeakRevPower(…) moved from netInterface.c to network.c
• skin graphics added for chkRxAnt and chkVFOBLock controls

2.5.6 (2018-3-25)

• added MIDI/CAT updates
• added independent VFO Locks

2.5.5 (2018-3-24)

• added support for ANAN-7000DLE
• added 'Rx Ant' support

2.5.4 (2018-3-22)

• added Audio Adaptive Variable Resampler with monitor tools