w4b-zero/esp32_ws2812_ntp_clock

ESP32-ws2812-Clock

ESP32-ws2812-NTP-Clock

       
   

Internet Time Clock (Ring 60Leds + Clock 58Leds) for PlatformIO

On first launch, an unsecured Wifi Access Point will be created!
When connecting to this you will be redirected to your browser to the web configuration panel. (192.168.4.1)
Please select your router there and enter your password.
Selectable languages are German, English and Dutch.
With the help of a checkbox you can protect the web control panel with a password, which you can enter in the text field below.
The password already contained therein was automatically generated at the first start.
Finally, all you have to do is click on save - if everything went well, ##**##**##** should appear in the wifi password text field.
Now you can click Reboot device to connect to your router.

To call up the web configuration panel again, you have to press the "Start Config Button" for about 3 seconds when restarting/switching on.

Used Libraries

• fastled/FastLED @ ^3.6.0
• https://github.com/taranais/NTPClient
• https://github.com/Arduino-IRremote/Arduino-IRremote
• paulstoffregen/OneWire @ ^2.3.7
• milesburton/DallasTemperature @ ^3.11.0
• https://github.com/Juerd/ESP-WiFiSettings

Custom ESP Board

Used Pins

Start Config Button = GPIO 27
LEDs WS2812b = GPIO 16
Button = GPIO 17 (Nightmode / Daymode)
IR TSOP38238 = GPIO 21
Relay SRD-05VDC-SL-A = GPIO 22
Temp DS18B20 = GPIO 18

arrangement of LEDs

ESP32 mini

IR Remote

ON / OFF All Led Off used Relay
1 = Date
2 = Year
3 = Temp
4 = Test Numbers
5 = Rainbow
6 = Rainbow
7 = Rainbow
8 = Nightmode / Daymode

My Discord Server