AnyMeal is a free and open source recipe management software developed using SQLite3 and Qt5. It can manage a cookbook with more than 250,000 MealMaster recipes, thereby allowing to import, export, search, display, edit, and print them. AnyMeal is available for GNU/Linux and Microsoft Windows.
Home Page: https://wedesoft.github.io/anymeal
License: GNU General Public License v3.0
I sometimes like to use a different unit than the options the selection gives me. Would it be possible to make also a blank line for user defined units.
For example, I would like to use the unit: jar, flat teaspoon, etc.
It would be really great if it would be possible to program this.
If I install Anymeal on computer there isn't italian traslation files or folder(so the gui isn't in italian).
The application icon under Windows needs to be set.
Please build on Ubuntu xenial or earlier, so that the AppImage can run on all still-supported versions of Ubuntu. Thank you very much!
/lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.28' not found (required by /run/firejail/appimage/.appimage-9355/usr/bin/../lib/libsqlite3.so.0
Reference:
AppImage/appimage.github.io#2299
see title
anymeal 1.5
Debian GNU/Linux 10 (buster) x86_64
gourmet export 1 recipe as a test in mealmaster format. Attemptng to move recipes to anymeal
Rejected recipe: Problem in state 6 and line 5: unexpected character 'P'
MMMMM----- Recipe via Meal-Master (tm)
Title: 04 - kimchi
Categories: Asian/Korean, Health
Preparation Time: 25 minutes
Link: http://www.chowhound.com/recipes/basic-napa-cabbage-kimchi-kimchee-29505
1 (2-pound) napa cabbage
1/2 c kosher salt
12 c cold water, plus more as needed
8 oz daikon radish, peeled and cut into 2-inch matchsticks
4 md scallions, ends trimmed, cut into 1-inch pieces (use all parts)
1/4 c fish sauce
1/4 c peeled and minced fresh ginger (from about a 2-ounce piece)
1 tb minced garlic cloves (from 6 to 8 medium cloves)
2 t Korean salted shrimp, minced
1 1/2 t granulated sugar
1: Cut the cabbage in half lengthwise, then crosswise into 2-inch
pieces, discarding the root end. Place in a large bowl, sprinkle with
the salt, and toss with your hands until the cabbage is coated. Add
enough cold water to just cover (about 12 cups), making sure the
cabbage is submerged (it’s OK if a few leaves break the surface).
/assets/2014/10/29505_kimchee_inline_640_1.jpg! Cover with plastic
wrap or a baking sheet and let sit at room temperature at least 12
hours and up to 24 hours.
2: Place a colander in the sink, drain the cabbage, and rinse
with cold water. Gently squeeze out the excess liquid and transfer to
a medium bowl; set aside.
3: Place the remaining ingredients in a large bowl and stir to
combine. Add the cabbage and toss with your hands until evenly
combined and the cabbage is thoroughly coated with the mixture. Pack
the mixture tightly into a clean 2-quart or 2-liter glass jar with a
tightfitting lid and seal the jar. Let sit in a cool, dark place for
24 hours (the mixture may bubble). Open the jar to let the gases
escape, then reseal and refrigerate at least 48 hours before eating
(kimchi is best after fermenting about 1 week). Refrigerate for up to
1 month.
Rating: 4.5/5 stars
Summary
Kimchi is a traditional Korean dish of fermented vegetables, the most
common of which are napa cabbage and daikon radish. In addition to
being served as banchan, Korean side dishes presented as part of a
meal, it can also be used in a variety of cooked dishes. Try it as a
sauce for Brussels sprouts or braised with short ribs. The versatility
of kimchi makes it great to use in everyday cooking.
Game plan: Kimchi needs time to ferment, so we recommend starting a
batch about a week before you plan to use it.
What to buy: Korean red pepper powder or kochukaru is what gives
kimchee its spiciness. It can be found in Korean markets in large
resealable plastic bags, in different grades of coarseness and
spiciness. Choose a grade based on your personal preference.
Also known as saeujeot, Korean salted shrimp are very small, naturally
fermented shrimp that impart authentic flavor to kimchi. They are sold
in jars and can be found in the refrigerator case of Korean markets.
Special equipment: You will need a clean 2-quart or 2-liter glass jar
with a tightfitting lid to hold the kimchi while it ferments. Do not
use plastic, as the odors from the kimchi can be hard to remove from
plastic.
More kimchi recipes.
by Christine Gallary
MMMMM
The tests require google test sources:
Might it be possible to directly link to a pre-compiled libgtest ? This could be
added as an additional configuration option.
I would translate the software. How can do It(Ex. Crowdin, Weblate, etc...)?
Add in future compability between AnyMeal and the android app EnRecipes
Hello. I'm trying to install your application on Ubuntu 18.04 and I'm getting an error while trying to execute the MAKE command. It's quite possible I'm doing something wrong, since I'm a complete n00b. Here is the error I'm getting....
make all-recursive
make[1]: Entering directory '/home/joe/Downloads/anymeal-1.4'
Making all in anymeal
make[2]: Entering directory '/home/joe/Downloads/anymeal-1.4/anymeal'
make all-recursive
make[3]: Entering directory '/home/joe/Downloads/anymeal-1.4/anymeal'
Making all in locale
make[4]: Entering directory '/home/joe/Downloads/anymeal-1.4/anymeal/locale'
Making all in de
make[5]: Entering directory '/home/joe/Downloads/anymeal-1.4/anymeal/locale/de'
make[5]: Nothing to be done for 'all'.
make[5]: Leaving directory '/home/joe/Downloads/anymeal-1.4/anymeal/locale/de'
make[5]: Entering directory '/home/joe/Downloads/anymeal-1.4/anymeal/locale'
make[5]: Nothing to be done for 'all-am'.
make[5]: Leaving directory '/home/joe/Downloads/anymeal-1.4/anymeal/locale'
make[4]: Leaving directory '/home/joe/Downloads/anymeal-1.4/anymeal/locale'
make[4]: Entering directory '/home/joe/Downloads/anymeal-1.4/anymeal'
g++ -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR="/usr/share/locale" -I/usr/include -pipe -O2 -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CONCURRENT_LIB -DQT_DBUS_LIB -DQT_NETWORK_LIB -DQT_SQL_LIB -DQT_TESTLIB_LIB -DQT_XML_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR="/tmp" -I. -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtConcurrent -isystem /usr/include/x86_64-linux-gnu/qt5/QtDBus -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtSql -isystem /usr/include/x86_64-linux-gnu/qt5/QtTest -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -I. -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -g -O2 -MT anymeal-moc_main_window.o -MD -MP -MF .deps/anymeal-moc_main_window.Tpo -c -o anymeal-moc_main_window.o test -f 'moc_main_window.cc' || echo './'moc_main_window.cc
moc_main_window.cc:149:1: error: ‘QT_INIT_METAOBJECT’ does not name a type; did you mean ‘Q_INIT_RESOURCE’?
QT_INIT_METAOBJECT const QMetaObject MainWindow::staticMetaObject = {
^~~~~~~~~~~~~~~~~~
Q_INIT_RESOURCE
Makefile:875: recipe for target 'anymeal-moc_main_window.o' failed
make[4]: *** [anymeal-moc_main_window.o] Error 1
make[4]: Leaving directory '/home/joe/Downloads/anymeal-1.4/anymeal'
Makefile:1183: recipe for target 'all-recursive' failed
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory '/home/joe/Downloads/anymeal-1.4/anymeal'
Makefile:535: recipe for target 'all' failed
make[2]: *** [all] Error 2
make[2]: Leaving directory '/home/joe/Downloads/anymeal-1.4/anymeal'
Makefile:423: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/joe/Downloads/anymeal-1.4'
Makefile:355: recipe for target 'all' failed
make: *** [all] Error 2
Hi, I hope you are well during this pandemic.
I show below how the ingredients look like on Anymeal 1.12
The 1st two columns (see 2 below as well) could do with a bit of padding to separate the unit "tablespoon" etc more as they do look very close to the next column.
Also the Header labels would view better (imho) if they were left aligned - If you agree, that is why the 1st column will need padding so that heading "amount" does not butt up to "unit"
Cheers, Stay safe
see title
Qt 6 has been released. Should update https://github.com/wedesoft/anymeal/blob/master/m4/ax_have_qt.m4#L69 to check for Qt5 only
It should be possible to edit existing and new recipes.
Also make button first.
Can a compiled version of Google test be used?
https://github.com/wedesoft/anymeal/blob/master/configure.ac#L22-L28 compiles the source code
see title
The Drop Down Category list order is probably in the order of creation by date at the moment - so, when typing in the selection box a search item for Categories the list appears random. There are 2 useful reason for reordering in to A-Z
The software should be packaged and submitted to Debian.
I carried out an export of the entire database to create an offsite backup of my data. Some recipes failed, but I cannot identify what the errors are or what recipes not exported.
Steps:
As I have a 2620 recipe database a manual search without a clue to search for is a non starter.
In the past when I only exported a small number I was (possibly) able to find an error - the export routine did not seem to like the following in the Description: "sauté," - the comma was significant and subsequently removed manually. Changing the region code did not help either.
Regardless of the error cause at this time, it would be helpful to identify the problem recipes to identify with certainty the reason for the fail and eliminate - be it user error or bug etc
Regards
Hi,
I am selecting several recipes to print, however, only the last one in the list is being printed.
Actually the print preview also only shows one page also.
This is printer independent. I am also having the same issue when using Cups print to PDF.
Importing a single file after editing, I received a "0 files imported, 0 files failed" dialogue.
Inspection of /tmp/import-errors.mmf showed the file existed, but was empty.
Manually reviewing the file for import, I noticed the original edited recipe did not have "MMMMM" as the last line.
It took me ages to spot this (bad brain day I think), Adding this missing element allowed the import.
I expected the Error Dialogue to show "0 files imported, 1 file failed" and the import-errors.mmf to say something about end of file missing.
Not urgent or important but I thought I would report here to be useful.
Like others, I have been importing recipes. But today I have wanted to write one from scratch, copying from hand written notes
To create a new recipe the only way I could find is to right click on an existing recipe (previously imported?), select "Edit Recipe ", and then select "Edit New"
"Edit New" is missing from the Edit selection Header bar menu
This sequence will not be obvious to new users.
May I respectfully suggest that an "Edit (or preferably Create) New" entry to "Edit" header bar selections and a Toolbar button is added.
Additionally, the shortcut keys to be remapped so that Ctrl+N opens the Edit(Create)New Recipe creation page, and the "Convert Unit" window given another key combination (maybe Ctrl+U).
I am using Anymeal extensively. I find it just perfect and the absence of bloat is very welcome.
I wonder if it is feasible to add a search with/without for the categories as well as ingredients? - or allow REGEX in the search field/box?
I have a specific example. I have 400+ recipes. Sometimes I need to filter to find something which does not have the category "Shelfish" or "Nuts" due someone's intolerance. I know I can achieve this by filtering out all the individual ingredients that are Shellfish or Nuts, but there are so many it takes for ever. However, I do have categories, Shelfish, Meat, Nuts, Cakes etc. Being able to search for entries without those would be so very much quicker.
Stay Safe,
Dan
Whenever I insert a line break, it turns into a blank line.
Could you please change this so that I only make a line break with [Enter]?
Or is there another key combination for this?
I have to select UTF-8 for both imports and exports every-time this function is required. I am importing lots of hand edited single recipes from selected large lists avail online. In a session I might import 20 or so times, on each import I have to select the Encoding, and it is always the same one. I know I could aggregate and save them for a single bulk import, but my work flow is better suited to importing and assessing the result for errors and mistakes before moving on to the next recipe.
If the program could carry an encoding setting - so that all imports and exports are held to one standard that would be great.
The application should allow to export selected recipes in MealMaster format (with chosen encoding).
I downloaded the AppImage. Made the file executable, however it fails to run at all on my Linux system, openSUSE 15.2
The following messages were returned at the command line:
Do you have any suggestions to overcome this issue? I would truly like to give anymeal a fair try. All reports indicate that it should well fit my needs.
Thanks for any help.
Mike
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
Django
The Web framework for perfectionists with deadlines.
Laravel
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
Microsoft
Open source projects and samples from Microsoft.
Google
Google ❤️ Open Source for everyone.
Alibaba
Alibaba Open Source for everyone
D3
Data-Driven Documents codes.
Tencent
China tencent open source team.